Fork from official redis-3.0.5, and run on the dpdk user space TCP/IP stack(ANS"Acceleted Network Stack"). For detail function, please refer to redis official website(http://redis.io//).
- Download latest dpdk version from dpdk website, and build dpdk
$ make config T=x86_64-native-linuxapp-gcc
$ make install T=x86_64-native-linuxapp-gcc
$ export RTE_SDK=/home/mytest/dpdk
$ export RTE_TARGET=x86_64-native-linuxapp-gcc
- Download ANS following the ANS wiki, build ans and startup ans
$ git clone https://github.com/ansyun/dpdk-ans.git
$ export RTE_ANS=/home/mytest/dpdk-ans
$ ./install_deps.sh
$ cd ans
$ make
$ sudo ./build/ans -c 0x2 -n 1 -- -p 0x1 --config="(0,0,1)"
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 2 lcore(s)
EAL: VFIO modules not all loaded, skip VFIO support...
EAL: Setting up physically contiguous memory...
EAL: Ask a virtual area of 0x400000 bytes
EAL: Virtual area found at 0x7fdf90c00000 (size = 0x400000)
EAL: Ask a virtual area of 0x15400000 bytes
- Download dpdk-redis, build dpdk-redis and startup dpdk-redis
$ git clone https://github.com/ansyun/dpdk-redis.git
$ make
# ./src/redis-server redis.conf
start init anssock
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 7 on socket 0
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 8 lcore(s)
EAL: Setting up physically contiguous memory...
EAL: WARNING: Address Space Layout Randomization (ASLR) is enabled in the kernel.
EAL: This may cause issues with mapping memory into secondary processes
EAL: Analysing 4 files
EAL: Mapped segment 0 of size 0x100000000
EAL: TSC frequency is ~1698035 KHz
EAL: Master lcore 0 is ready (tid=9ca268c0;cpuset=[0])
USER8: LCORE[-1] anssock any lcore id 0xffffffff
USER8: LCORE[2] anssock app id: 17217
USER8: LCORE[2] anssock app name: redis-server
USER8: LCORE[2] anssock app lcoreId: 2
USER8: LCORE[2] mp ops number 4, mp ops index: 0
17217:M 05 Jan 20:54:43.676 * Increased maximum number of open files to 150032 (it was originally set to 65535).
skip linux fd 8
_._
_.-``__ ''-._
_.-`` `. `_. ''-._ Redis 3.0.5 (c279671c/0) 64 bit
.-`` .-```. ```\/ _.,_ ''-._
( ' , .-` | `, ) Running in standalone mode
|`-._`-...-` __...-.``-._|'` _.-'| Port: 6379
| `-._ `._ / _.-' | PID: 17217
`-._ `-._ `-./ _.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' | http://redis.io
`-._ `-._`-.__.-'_.-' _.-'
|`-._`-._ `-.__.-' _.-'_.-'|
| `-._`-._ _.-'_.-' |
`-._ `-._`-.__.-'_.-' _.-'
`-._ `-.__.-' _.-'
`-._ _.-'
`-.__.-'
- Performance Testing
====ENV===
CPU:Intel(R) Xeon(R) CPU E5-2609 v4 @ 1.70GHz.
NIC:Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)
ANS run on a lcore.
root@ubuntu:~/src/dpdk-redis# ./src/redis-benchmark -h 10.0.0.2 -p 6379 -n 100000 -c 50 -q
PING_INLINE: 138888.89 requests per second
PING_BULK: 141242.94 requests per second
SET: 140449.44 requests per second
GET: 141043.72 requests per second
INCR: 141442.72 requests per second
LPUSH: 141043.72 requests per second
LPOP: 140449.44 requests per second
SADD: 141643.06 requests per second
SPOP: 141843.97 requests per second
LPUSH (needed to benchmark LRANGE): 141442.72 requests per second
LRANGE_100 (first 100 elements): 48192.77 requests per second
LRANGE_300 (first 300 elements): 14330.75 requests per second
LRANGE_500 (first 450 elements): 10405.83 requests per second
LRANGE_600 (first 600 elements): 7964.95 requests per second
MSET (10 keys): 107758.62 requests per second
- dpdk-redis vs official redis benchmark results
official redis test was executed using the loopback interface. benchmark results.
dpdk-redis test was executed using the 82599ES interface. If run more redis-benchmark, could get higher performance.
- with pipelining
# ./src/redis-benchmark -h 10.0.0.2 -r 1000000 -n 2000000 -t get,set,lpush,lpop -P 16 -q
SET: 645577.81 requests per second
GET: 851063.88 requests per second
LPUSH: 897666.12 requests per second
LPOP: 984251.94 requests per second
- without pipelining
# ./src/redis-benchmark -h 10.0.0.2 -r 1000000 -n 2000000 -t get,set,lpush,lpop -q
SET: 137080.19 requests per second
GET: 137315.48 requests per second
LPUSH: 138446.62 requests per second
LPOP: 138600.14 requests per second
- Linode 2048 instance (with pipelining)
# ./src/redis-benchmark -h 10.0.0.2 -r 1000000 -n 2000000 -t get,set,lpush,lpop -q -P 16
SET: 620925.19 requests per second
GET: 821355.25 requests per second
LPUSH: 903750.56 requests per second
LPOP: 982800.94 requests per second
-Linode 2048 instance (without pipelining)
# ./src/redis-benchmark -h 10.0.0.2 -r 1000000 -n 2000000 -t get,set,lpush,lpop -q
SET: 137296.62 requests per second
GET: 137693.64 requests per second
LPUSH: 139528.39 requests per second
LPOP: 139014.39 requests per second
- Shall use the same gcc version to compile your application.
- In order to improve ANS performance, you shall isolate ANS'lcore from kernel by isolcpus and isolcate interrupt from ANS's lcore by update /proc/irq/default_smp_affinity file.
- You shall include dpdk libs as below way because mempool lib has attribute((constructor, used)) in dpdk-16.07 version, otherwise your application would coredump.
$(RTE_ANS)/librte_anssock/librte_anssock.a \
-L$(RTE_SDK)/$(RTE_TARGET)/lib \
-Wl,--whole-archive -Wl,-lrte_mbuf -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal -Wl,--no-whole-archive -Wl,-export-dynamic \
For free support, please use ans team mail list at [email protected], or QQ Group:86883521, or https://dpdk-ans.slack.com.