Usage

Usage

Getting Help

Context-sensitive help is available for every command in aws-vault.

# Show general help about aws-vault
$ aws-vault --help

# Show longer help about all options in aws-vault
$ aws-vault --help-long

# Show the most detailed information about the exec command
$ aws-vault exec --help

Typical use-cases for aws-vault

There are a few different ways aws-vault can be used

Use-case 1: aws-vault is the executor and provides the environment

Use aws-vault exclusively as a command executor, where aws-vault provides the environment and runs a command.

; master creds added with 'aws-vault add my_profile_master'
[profile my_profile_master]

[profile my_profile_role]
source_profile=my_profile_master
role_arn=xxx

aws-vault exec my_profile_master ./my-command   # success, uses sts session generated by aws-vault
aws-vault exec my_profile_role ./my-command     # success, uses role creds generated by aws-vault

AWS_PROFILE=my_profile_master ./my-command      # Not expected to be functional
AWS_PROFILE=my_profile_role ./my-command        # Not expected to be functional

In this scenario, the profile name and aws config is used exclusively by aws-vault, which provides the environment for the command to run in.

This is a very unix-y and 12-factor approach. It's the original and the primary use-case of aws-vault - it's why aws-vault exec exists.

Use-case 2: aws-vault is a "master credentials vault" for AWS SDK

aws-vault can be used in credential_process in the AWS config to provide master creds. This is more in-line with the AWS SDK way of approaching the problem via credential_process and AWS_PROFILE

; master creds added with 'aws-vault add my_profile_master'
[profile my_profile_master]
credential_process = aws-vault export --format=json --no-session my_profile_master

[profile my_profile_role]
source_profile=my_profile_master
role_arn=xxx

aws-vault exec my_profile_master ./my-command   # success (uses master creds)
aws-vault exec my_profile_role ./my-command     # success (aws-vault role)

AWS_PROFILE=my_profile_master ./my-command      # success (uses credential_process to get aws-vault master creds)
AWS_PROFILE==my_profile_role ./my-command       # success (SDK role)

Use-case 3: aws-vault is a "MFA session cache" for AWS SDK

Very similar to Use-case 2, aws-vault can be used to cache STS MFA credentials between profiles. This means you are not forced to re-authenticate with MFA every time you switch profiles

; master creds added with 'aws-vault add my_profile_master'
[profile my_profile_master]
mfa_serial=mmm
credential_process = aws-vault export --format=json my_profile_master

[profile my_profile_role]
source_profile=my_profile_master
mfa_serial=mmm
role_arn=xxx1

[profile my_profile_role2]
source_profile=my_profile_master
mfa_serial=mmm
role_arn=xxx2

aws-vault exec my_profile_master ./my-command   # success (STS session)
aws-vault exec my_profile_role ./my-command     # success (role)

AWS_PROFILE=my_profile_master ./my-command      # success (uses credential_process to get aws-vault session)
AWS_PROFILE=my_profile_role ./my-command        # success (uses aws-vault session + SDK role)

Use-case 4: aws-vault caches alternative credential sources

aws-vault caches credentials from alternative credential sources like sso_start_url, web_identity_token_process, credential_process

[profile my_profile_using_sso]
sso_start_url = https://mycompany.awsapps.com/start

[profile my_profile_using_process]
credential_process = my-custom-creds-cmd

aws-vault exec my_profile_using_sso ./my-command       # success, uses aws-vault caching
aws-vault exec my_profile_using_process ./my-command   # success, uses aws-vault caching

AWS_PROFILE=my_profile_using_sso ./my-command          # success, no caching
AWS_PROFILE=my_profile_using_process ./my-command      # success, no caching

Config

AWS config file

aws-vault uses your ~/.aws/config to load AWS config. This should work identically to the config specified by the aws-cli docs.

`include_profile`

(Note: aws-vault v5 calls this parent_profile)

AWS Vault also recognises an extra config variable, include_profile, which is not recognised by the aws-cli. This variable allows a profile to load configuration horizontally from another profile.

This is a flexible mechanism for more complex configurations.

For example you can use it in "mixin" style where you import a common fragment. In this example, the root, order-dev and order-staging-admin profiles include the region, mfa_serial and source_profile configuration from common.

; The "common" profile here operates as a "config fragment" rather than a profile
[profile common]
region=eu-west-1
mfa_serial=arn:aws:iam::123456789:mfa/johnsmith
source_profile = root

[profile root]
include_profile = common

[profile order-dev]
include_profile = common
role_arn=arn:aws:iam::123456789:role/developers

[profile order-staging-admin]
include_profile = common
role_arn=arn:aws:iam::123456789:role/administrators

Or you could use it in "parent" style where you conflate the fragment with the profile. In this example the order-dev and order-staging-admin profiles include the region, mfa_serial and source_profile configuration from root, while also using the credentials stored against the root profile as the source credentials source_profile = root

; The "root" profile here operates as a profile, a config fragment as well as a source_profile
[profile root]
region=eu-west-1
mfa_serial=arn:aws:iam::123456789:mfa/johnsmith
source_profile = root

[profile order-dev]
include_profile = root
role_arn=arn:aws:iam::123456789:role/developers

[profile order-staging-admin]
include_profile = root
role_arn=arn:aws:iam::123456789:role/administrators

`session_tags` and `transitive_session_tags`

It is possible to set session tags when AssumeRole is used. Two custom config variables could be defined for that: session_tags and transitive_session_tags. The former defines a comma separated key=value list of tags and the latter is a comma separated list of tags that should be persisted during role chaining:

[profile root]
region=eu-west-1

[profile order-dev]
source_profile = root
role_arn=arn:aws:iam::123456789:role/developers
session_tags = key1=value1,key2=value2,key3=value3
transitive_session_tags = key1,key2

`source_identity`

It is possible to set source identity when AssumeRole is used. Custom config variable source_identity allows you to set the value.

[profile root]
region=eu-west-1

[profile order-dev]
source_profile = root
role_arn=arn:aws:iam::123456789:role/developers
source_identity=your_user_name

`mfa_process`

If you have a method to generate an MFA token, you can use it with aws-vault by specifying the mfa_process option in a profile of your ~/.aws/config file. The value of mfa_process should be a command that will output the MFA token to stdout.

For example, to use pass to retrieve an MFA token from a password store entry, you could use the following:

[profile foo]
mfa_serial=arn:aws:iam::123456789:mfa/johnsmith
mfa_process=pass otp my_aws_mfa

Or another example using 1Password

[profile foo]
mfa_serial=arn:aws:iam::123456789:mfa/johnsmith
mfa_process=op item get my_aws_mfa --otp

WARNING: Use of this option runs against security best practices. It is recommended that you use a dedicated MFA device.

Environment variables

To configure the default flag values of aws-vault and its subcommands:

AWS_VAULT_BACKEND: Secret backend to use (see the flag --backend)
AWS_VAULT_KEYCHAIN_NAME: Name of macOS keychain to use (see the flag --keychain)
AWS_VAULT_PROMPT: Prompt driver to use (see the flag --prompt)
AWS_VAULT_PASS_PASSWORD_STORE_DIR: Pass password store directory (see the flag --pass-dir)
AWS_VAULT_PASS_CMD: Name of the pass executable (see the flag --pass-cmd)
AWS_VAULT_PASS_PREFIX: Prefix to prepend to the item path stored in pass (see the flag --pass-prefix)
AWS_VAULT_FILE_DIR: Directory for the "file" password store (see the flag --file-dir)
AWS_VAULT_FILE_PASSPHRASE: Password for the "file" password store
AWS_CONFIG_FILE: The location of the AWS config file

To override the AWS config file (used in the exec, login and rotate subcommands):

AWS_REGION: The AWS region
AWS_DEFAULT_REGION: The AWS region, applied only if AWS_REGION isn't set
AWS_STS_REGIONAL_ENDPOINTS: STS endpoint resolution logic, must be "regional" or "legacy"
AWS_MFA_SERIAL: The identification number of the MFA device to use
AWS_ROLE_ARN: Specifies the ARN of an IAM role in the active profile
AWS_ROLE_SESSION_NAME: Specifies the name to attach to the role session in the active profile

To override session durations (used in exec and login):

AWS_SESSION_TOKEN_TTL: Expiration time for the GetSessionToken credentials. Defaults to 1h
AWS_CHAINED_SESSION_TOKEN_TTL: Expiration time for the GetSessionToken credentials when chaining profiles. Defaults to 8h
AWS_ASSUME_ROLE_TTL: Expiration time for the AssumeRole credentials. Defaults to 1h
AWS_FEDERATION_TOKEN_TTL: Expiration time for the GetFederationToken credentials. Defaults to 1h
AWS_MIN_TTL: The minimum expiration time allowed for a credential. Defaults to 5m

Note that the session durations above expect a unit after the number (e.g. 12h or 43200s).

To override or set session tagging (used in exec):

AWS_SESSION_TAGS: Comma separated key-value list of tags passed with the AssumeRole call, overrides session_tags profile config variable
AWS_TRANSITIVE_TAGS: Comma separated list of transitive tags passed with the AssumeRole call, overrides transitive_session_tags profile config variable

To override or set the source identity (used in exec and login):

AWS_SOURCE_IDENTITY: Specifies the source identity for assumed role sessions

Backends

You can choose among different pluggable secret storage backends. You can set the backend using the --backend flag or the AWS_VAULT_BACKEND environment variable. Run aws-vault --help to see what your --backend flag supports.

Keychain

If you're looking to configure the amount of time between having to enter your Keychain password for each usage of a particular profile, you can do so through Keychain:

Open "Keychain Access"
Open the aws-vault keychain. If you do not have "aws-vault" in the sidebar of the Keychain app, then you can do "File -> Add Keychain" and select the aws-vault.keychain-db. This is typically created in Users/{USER}/Library/Keychains.
Right click on aws-vault keychain, and select "Change Settings for Keychain 'aws-vault"
Update "Lock after X minutes of inactivity" to your desired value.
Hit save.

Managing credentials

Using multiple profiles

In addition to using IAM roles to assume temporary privileges as described in README.md, aws-vault can also be used with multiple profiles directly. This allows you to use multiple separate AWS accounts that have no relation to one another, such as work and home.

# Store AWS credentials for the "home" profile
$ aws-vault add home
Enter Access Key Id: ABDCDEFDASDASF
Enter Secret Key: %

# Execute a command using temporary credentials
$ aws-vault exec home -- aws s3 ls
bucket_1
bucket_2

# store credentials for the "work" profile
$ aws-vault add work
Enter Access Key Id: ABDCDEFDASDASF
Enter Secret Key: %

# Execute a command using temporary credentials
$ aws-vault exec work -- aws s3 ls
another_bucket

Here is an example ~/.aws/config file, to help show the configuration. It defines two AWS accounts: "home" and "work", both of which use MFA. The work account provides two roles, allowing the user to become either profile.

[default]
region = us-east-1

[profile home]
mfa_serial = arn:aws:iam::111111111111:mfa/home-account

[profile work]
mfa_serial = arn:aws:iam::111111111111:mfa/work-account
role_arn = arn:aws:iam::111111111111:role/ReadOnly

[profile work-admin]
role_arn = arn:aws:iam::111111111111:role/Administrator
source_profile = work

Listing profiles and credentials

You can use the aws-vault list command to list out the defined profiles, and any session associated with them.

$ aws-vault list
Profile                  Credentials              Sessions
=======                  ===========              ========
home                     home
work                     work                     1525456570
work-read-only           work
work-admin               work

Removing credentials

The aws-vault remove command can be used to remove credentials. It works similarly to the aws-vault add command.

# Remove AWS credentials for the "work" profile
$ aws-vault remove work
Delete credentials for profile "work"? (y|N) y
Deleted credentials.

Rotating credentials

Regularly rotating your access keys is a critical part of credential management. You can do this with the aws-vault rotate <profile> command as often as you like. Restrictions on IAM access using GetSessionToken means you will need to have configured MFA or use the --no-session flag.

The minimal IAM policy required to rotate your own credentials is:

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Action": [
                "iam:CreateAccessKey",
                "iam:DeleteAccessKey",
                "iam:GetUser"
            ],
            "Resource": [
                "arn:aws:iam::*:user/${aws:username}"
            ]
        }
    ]
}

Managing Sessions

Executing a command

Running aws-vault exec will run a command with AWS credentials.

When using exec, you may find it useful to use the builtin -- feature in bash, zsh and other POSIX shells. For example

aws-vault exec myprofile -- aws s3 ls

Using -- signifies the end of the aws-vault options, and allows the shell autocomplete to kick in and offer autocompletions for the proceeding command.

If you use exec without specifying a command, AWS Vault will create a new interactive subshell. Note that when creating an interactive subshell, bash, zsh and other POSIX shells will execute the ~/.bashrc or ~/.zshrc file. If you have local variables, functions or aliases (for example your PS1 prompt), ensure that they are defined in the rc file so they get executed when the subshell begins.

Logging into AWS console

You can use the aws-vault login command to open a browser window and login to AWS Console for a given account:

$ aws-vault login work

If you have credentials already available in your environment, aws-vault will use these credentials to sign you in to the AWS console.

$ export AWS_ACCESS_KEY_ID=%%%
$ export AWS_SECRET_ACCESS_KEY=%%%
$ export AWS_SESSION_TOKEN=%%%
$ aws-vault login

Removing stored sessions

If you want to remove sessions managed by aws-vault before they expire, you can do this with aws-vault clear command.

You can also specify a profile to remove sessions for this profile only.

aws-vault clear [profile]

Using --no-session

AWS Vault will typically create temporary credentials using a combination of GetSessionToken and AssumeRole, depending on the config. The GetSessionToken call is made with MFA if available, and the resulting session is cached in the backend vault and can be used to assume roles from different profiles without further MFA prompts.

If you wish to skip the GetSessionToken call, you can use the --no-session flag.

However, consider that if you use --no-session with a profile using IAM credentials and NO role_arn, then your IAM credentials will be directly exposed to the terminal/application you are running. This is the opposite of what you are normally trying to achieve by using AWS Vault. You can easily witness that by doing

aws-vault exec <iam_user_profile> -- env | grep AWS

You'll see an AWS_ACCESS_KEY_ID of the form ASIAxxxxxx which is a temporary one. Doing

aws-vault exec <iam_user_profile> --no-session -- env | grep AWS

You'll see your IAM user AWS_ACCESS_KEY_ID of the form AKIAxxxxx directly exposed, as well as the corresponding AWS_SECRET_KEY_ID.

Session duration

If you try to assume a role from a temporary session or another role, AWS considers that as role chaining and limits your ability to assume the target role to 1h. Trying to use a duration longer than 1h may result in an error:

aws-vault: error: Failed to get credentials for default: ValidationError: The requested DurationSeconds exceeds the MaxSessionDuration set for this role.
        status code: 400, request id: aa58fa50-4a5e-11e9-9566-293ea5c350ee

For that reason, AWS Vault will not use GetSessionToken if --duration or the role's duration_seconds is longer than 1h.

Using `--server`

There may be scenarios where you'd like to assume a role for a long length of time, or perhaps when using a tool where using temporary sessions on demand is preferable. For example, when using a tool like Terraform, you need to have AWS credentials available to the application for the entire duration of the infrastructure change.

AWS Vault can run a background server to imitate the metadata endpoint that you would have on an EC2 or ECS instance. When your application uses the AWS SDK to locate credentials, it will automatically connect to this server that will issue a new set of temporary credentials (using the same profile as the one the server was started with). This server will continue to generate temporary credentials any time the application requests it.

`--ec2-server`

This approach has the major security drawback that while this aws-vault server runs, any application wanting to connect to AWS will be able to do so, using the profile the server was started with. Thanks to aws-vault, the credentials are not exposed, but the ability to use them to connect to AWS is!

To use --ec2-server, AWS Vault needs root/administrator privileges in order to bind to the privileged port. AWS Vault runs a minimal proxy as the root user, proxying through to the real aws-vault instance.

`--ecs-server`

The ECS Credential provider binds to a random, ephemeral port and requires an authorization token, which offers the following advantages over the EC2 Metadata provider:

Does not require root/administrator privileges
Allows multiple providers simultaneously for discrete processes
Mitigates the security issues that accompany the EC2 Metadata Service because the address is not well-known and the authorization token is only exposed to the subprocess via environment variables

However, this will only work with the AWS SDKs that support AWS_CONTAINER_CREDENTIALS_FULL_URI. The C++ and PHP SDKs do not currently support it.

The ECS server also responds to requests on /role-arn/YOUR_ROLE_ARN with the role credentials, making it usable with AWS_CONTAINER_CREDENTIALS_RELATIVE_URI when combined with a reverse proxy (see the Docker section below).

Temporary credentials limitations with STS, IAM

When using temporary credentials you are restricted from using some STS and IAM APIs (see here). The restriction is enforced with InvalidClientTokenId error response.

$ aws-vault exec <iam_user_profile> -- aws iam get-user
An error occurred (InvalidClientTokenId) when calling the GetUser operation: The security token included in the request is invalid

For restricted IAM operation you can add MFA to the IAM User and update your ~/.aws/config file with MFA configuration. Alternately you may avoid the temporary session entirely by using --no-session.

MFA

To enable MFA for a profile, specify the mfa_serial in ~/.aws/config. You can retrieve the MFA's serial (ARN) in the web console, under IAM > Users > <User> > Security Configuration. If you have an account with an MFA associated, but you don't provide the ARN, you are unable to call IAM services, even if you have the correct permissions to do so.

AWS Vault will attempt to re-use a GetSessionToken between profiles that share a common mfa_serial. In the following example, aws-vault will cache and re-use sessions between role1 and role2. This means you don't have to continually enter MFA codes if the MFA method is the same.

[profile tom]
mfa_serial = arn:aws:iam::111111111111:mfa/tom

[profile role1]
source_profile = tom
role_arn = arn:aws:iam::22222222222:role/role1
mfa_serial = arn:aws:iam::111111111111:mfa/tom

[profile role2]
source_profile = tom
role_arn = arn:aws:iam::33333333333:role/role2
mfa_serial = arn:aws:iam::111111111111:mfa/tom

Be sure to specify the mfa_serial for the source profile (in the above example tom) so that aws-vault can match the common mfa_serial.

You can also set the mfa_serial with the environment variable AWS_MFA_SERIAL.

Gotchas with MFA config

aws-vault v4 would inherit the mfa_serial from the source_profile. While this was intuitive for some, it made certain configurations difficult to express and is different behaviour to the aws-cli.

aws-vault v5 corrected this problem. The mfa_serial must be specified for each profile, the same way the aws-cli interprets the configuration. If you wish to avoid specifying the mfa_serial for each profile, consider using the mfa_serial in the [default] section, the AWS_MFA_SERIAL environment variable, or include_profile. For example:

[profile jon]
mfa_serial = arn:aws:iam::111111111111:mfa/jon
source_profile=jon

[profile role1]
role_arn = arn:aws:iam::22222222222:role/role1
include_profile = jon

[profile role2]
role_arn = arn:aws:iam::33333333333:role/role2
include_profile = jon

Single Sign On (SSO)

AWS IAM Identity Center provides single sign on, and was previously known as AWS SSO.

If your organization uses AWS IAM Identity Center for single sign on, AWS Vault provides a method for using the credential information defined by aws sso from v2 of the AWS CLI. The configuration options are as follows:

sso_session Name of the [sso-session] section in the same file with the common options, or:
sso_start_url The URL that points to the organization's AWS IAM Identity Center user portal.
sso_region The AWS Region that contains the AWS IAM Identity Center user portal host. This is separate from, and can be a different region than the default CLI region parameter.
sso_account_id The AWS account ID that contains the IAM role that you want to use with this profile.
sso_role_name The name of the IAM role that defines the user's permissions when using this profile.

Here is an example configuration using AWS IAM Identity Center for single sign on.

[profile Administrator-123456789012]
sso_start_url=https://aws-sso-portal.awsapps.com/start
sso_region=eu-west-1
sso_account_id=123456789012
sso_role_name=Administrator

Assuming roles with web identities

AWS supports assuming roles using web identity federation and OpenID Connect, including login using Amazon, Google, Facebook or any other OpenID Connect server. The configuration options are as follows:

web_identity_token_file A file that contains an OpenID Connect identity token. The token is loaded and passed as the WebIdentityToken argument of the AssumeRoleWithWebIdentity operation.
web_identity_token_process A command that executes to generate an OpenID Connect identity token. The token written to the command's standard out is passed as the WebIdentityToken argument of the AssumeRoleWithWebIdentity operation. This is a custom option supported only by aws-vault.

An example configuration using a static token:

[profile role1]
role_arn = arn:aws:iam::22222222222:role/role1
web_identity_token_file = /path/to/token.txt

An example using a token generated by an external command:

[profile role2]
role_arn = arn:aws:iam::33333333333:role/role2
web_identity_token_process = oidccli raw

Using `credential_process`

The AWS CLI config supports sourcing credentials directly from an external process, using credential_process.

Invoking `aws-vault` via `credential_process`

[profile home]
credential_process = aws-vault export --format=json home

If mfa_serial is set, please define the prompt driver (for example osascript for macOS), else the prompt will not show up.

[profile work]
mfa_serial = arn:aws:iam::123456789012:mfa/jonsmith
credential_process = aws-vault --prompt=osascript export --format=json work

Note that credential_process is designed for retrieving master credentials, while aws-vault outputs STS credentials by default. If a role is present, the AWS CLI/SDK uses the master credentials from the credential_process to generate STS credentials itself. So depending on your use-case, it might make sense for aws-vault to output master credentials by using a profile without a role and the --no-session argument. For example:

[profile jon]
credential_process = aws-vault export --no-session --format=json jon

[profile work]
mfa_serial = arn:aws:iam::123456789012:mfa/jonsmith
role_arn = arn:aws:iam::33333333333:role/role2
source_profile = jon

If you're using credential_process in your config to invoke aws-vault exec you should not use aws-vault exec on the command line to execute commands directly - the AWS SDK executes aws-vault for you.

Invoking `credential_process` via `aws-vault`

When executing a profile via aws-vault exec that has credential_process set, aws-vault will execute the specified command to obtain a credential. This will allow aws-vault to cache credentials obtained via credential_process.

Using a Yubikey

Yubikeys can be used with AWS Vault via Yubikey's OATH-TOTP support. TOTP is necessary because FIDO-U2F is unsupported on the AWS CLI and SDKs; even though it's supported on the AWS Console.

Prerequisites

A Yubikey that supports OATH-TOTP
ykman, the YubiKey Manager CLI tool.

You can verify these prerequisites by running ykman info and checking OATH is enabled.

Setup

Log into the AWS web console with your IAM user credentials, and navigate to My Security Credentials
Under Multi-factor authentication (MFA), click Manage MFA device and add a Virtual MFA device
Instead of showing the QR code, click on Show secret key and copy the key.
On a command line, run:
```
ykman oath accounts add -t arn:aws:iam::${ACCOUNT_ID}:mfa/${MFA_DEVICE_NAME}
```
replacing ${ACCOUNT_ID} with your AWS account ID and ${MFA_DEVICE_NAME} with the name you gave to the MFA device. It will prompt you for a base32 text and you can input the key from step 3. Notice the above command uses -t which requires you to touch your YubiKey to generate authentication codes.
Now you have to enter two consecutive MFA codes into the AWS website to assign your key to your AWS login. Just run ykman oath accounts code arn:aws:iam::${ACCOUNT_ID}:mfa/${MFA_DEVICE_NAME} to get an authentication code. The codes are re-generated every 30 seconds, so you have to run this command twice with about 30 seconds in between to get two distinct codes. Enter the two codes in the AWS form and click Assign MFA.

A script can be found at contrib/scripts/aws-iam-create-yubikey-mfa.sh to automate the process. Note that this script requires your $MFA_DEVICE_NAME to be your IAM username as the aws iam enable-mfa-device command in the CLI does not yet offer specifying the name. When only one MFA device was allowed per IAM user, the $MFA_DEVICE_NAME would always be your IAM username.

In case of TOTP being out of sync (AWS API doesn't accept MFA codes), a yubikey resync script can be found at contrib/scripts/aws-iam-resync-yubikey-mfa.sh to resync the yubikey with AWS. As above, this script requires your $MFA_DEVICE_NAME to be your IAM username.

Note that each [profile <name>] in your ~/.aws/config only supports one mfa_serial entry. If you wish to use multiple Yubikeys, or mix and match MFA devices, you'll need to add a profile for each method.

Usage

Using the ykman prompt driver, aws-vault will execute ykman to generate tokens for any profile in your .aws/config using an mfa_device.

aws-vault exec --prompt ykman ${AWS_VAULT_PROFILE_USING_MFA} -- aws s3 ls

Further config:

AWS_VAULT_PROMPT=ykman: to avoid specifying --prompt each time
YKMAN_OATH_CREDENTIAL_NAME: to use an alternative ykman credential
AWS_VAULT_YKMAN_VERSION: to set the major version of the ykman cli being used. Defaults to "4"
YKMAN_OATH_DEVICE_SERIAL: to set the device serial of a specific Yubikey if you have multiple Yubikeys plugged into your computer.

Shell completion

You can generate shell completions for

bash: eval "$(curl -fs https://raw.githubusercontent.com/99designs/aws-vault/master/contrib/completions/bash/aws-vault.bash)"
zsh: eval "$(curl -fs https://raw.githubusercontent.com/99designs/aws-vault/master/contrib/completions/zsh/aws-vault.zsh)"
fish: eval "$(curl -fs https://raw.githubusercontent.com/99designs/aws-vault/master/contrib/completions/fish/aws-vault.fish)"

Find the completion scripts at contrib/completions.

Desktop apps

You can use desktop apps with temporary credentials from AWS Vault too! For example on macOS run

aws-vault exec --server jonsmith -- open -W -a Lens

--server: starts the background server so that temporary credentials get refreshed automatically
open -W -a Lens: run the applications, waiting for it to exit

Docker

It's possible for Docker containers to retrieve credentials from aws-vault running on the host.

The ECS server responds to requests on /role-arn/YOUR_ROLE_ARN with the role credentials, making it usable with the AWS_CONTAINER_CREDENTIALS_FULL_URI or AWS_CONTAINER_CREDENTIALS_RELATIVE_URI environment variables. These environment variables are used by the AWS SDKs as part of the default credential provider chain.

In particular, this is designed to allow aws-vault to run on your local host while docker images access role credentials dynamically. This is achieved via a reverse-proxy container (started with aws-vault exec --ecs-server --lazy PROFILE -- docker-compose up ...) using the default ECS IP address 169.254.170.2. Docker containers no longer need AWS keys at all - instead they can specify the role they want to assume with AWS_CONTAINER_CREDENTIALS_RELATIVE_URI.

This use-case is similar to the goal of amazon-ecs-local-container-endpoints, however the difference here is that the long-lived AWS credentials are getting sourced from your keychain via aws-vault.

To test it out:

Add a base role to your ~/.aws/config (replacing with valid values)

[profile base-role]
source_profile=myprofile
role_arn=arn:aws:iam::222222222222:role/aws-vault-test
mfa_serial=arn:aws:iam::222222222222:mfa/<your.aws.username>

Start a reverse proxy:

$ cd contrib/_aws-vault-proxy
$ aws-vault --debug exec --server --lazy base-role -- docker compose up --build aws-vault-proxy

In a new terminal, assume a new role

$ export AWS_CONTAINER_CREDENTIALS_RELATIVE_URI=/role-arn/arn:aws:iam::222222222222:role/another-role-that-can-be-assumed-by-base-role
$ docker-compose run testapp
testapp $ aws sts get-caller-identity

Files

USAGE.md

Latest commit

History

USAGE.md

File metadata and controls

Usage

Getting Help

Typical use-cases for aws-vault

Use-case 1: aws-vault is the executor and provides the environment

Use-case 2: aws-vault is a "master credentials vault" for AWS SDK

Use-case 3: aws-vault is a "MFA session cache" for AWS SDK

Use-case 4: aws-vault caches alternative credential sources

Config

AWS config file

include_profile

session_tags and transitive_session_tags

source_identity

mfa_process

Environment variables

Backends

Keychain

Managing credentials

Using multiple profiles

Listing profiles and credentials

Removing credentials

Rotating credentials

Managing Sessions

Executing a command

Logging into AWS console

Removing stored sessions

Using --no-session

Session duration

Using --server

--ec2-server

--ecs-server

Temporary credentials limitations with STS, IAM

MFA

Gotchas with MFA config

Single Sign On (SSO)

Assuming roles with web identities

Using credential_process

Invoking aws-vault via credential_process

Invoking credential_process via aws-vault

Using a Yubikey

Prerequisites

Setup

Usage

Shell completion

Desktop apps

Docker

`include_profile`

`session_tags` and `transitive_session_tags`

`source_identity`

`mfa_process`

Using `--server`

`--ec2-server`

`--ecs-server`

Using `credential_process`

Invoking `aws-vault` via `credential_process`

Invoking `credential_process` via `aws-vault`