Skip to content

5. Settings

Jump to bottom
Thomas Höhener edited this page Jan 17, 2023 · 5 revisions

Matrix offset

In some rare cases, the illumination on the LED matrix is off by one or multiple LEDs. In other words, when the LED with the coordinates 1,1 should be illuminated, the LED with the coordinates 2,3 is powered on. With the x / y offset this can be corrected, thus in this case the x offset would be -1 and the y offset -2.

Network settings

Here the name of the Access point, which is used to connect to LITOS over WLAN, can be changed. If you have multiple LITOS systems, this is a way to access the right one.

Color of the reference outline

The color of the reference outline to align a multiwell plate can be changed here. By default, it is red since there the chance of activating optogenetic domains responding to blue light is the least.

Clone this wiki locally