enumerated
Several enumerated Types / constants are declared in the library and can be used as parameters to BME280 functions rather than having to type in the associated number. The types are as follow:
The mode() function allows the operating mode of the BME280 to be set. There are 3 keywords that can be used as parameters: "SleepMode", "ForcedMode" and "NormalMode"
The functions setOversampling() and getOversampling() allow turning off each of the BME280 sensor individually as well as setting/retrieving the oversampling rates. There are 3 keywords that can be used as parameters: "TemperatureSensor", "HumiditySensor" and "PressureSensor" to indicate which sensor to use.
The functions setOversampling() and getOversampling() allow oversampling rates to be set for each of the 3 sensing components of the BME280, the keywords that can be used as parameters here are: "SensorOff", "Oversample1", "Oversample2", "Oversample4", "Oversample8" and "Oversample16" to indicate which level of oversampling to use.
The iirFilter() function allows setting the IIR filter value. The keywords that can be used as parameters here are: "IIROff", "IIR2", "IIR4", "IIR8" and "IIR16".
The inactiveTime() function allows setting the pause time between measurements while in normal mode to a number of possible values: "inactiveHalf", "inactive63ms", "inactive125ms", "inactive250ms", "inactive500ms", "inactive1000ms", "inactive10ms", "inactive20ms".
The measurementTime() function returns the computed time it takes to perform one measurement cycle. There are two values that can be used as the parameter, either "TypicalMeasure" or "MaximumMeasure" to return either the typical time or the maximum possible measurement time.
