add all in one factory file script

merge_bin_all.sh

@@ -0,0 +1,92 @@
+#!/bin/bash
+
+# Binary file paths and addresses
+BOOTLOADER_BIN="build/bootloader/bootloader.bin"
+BOOTLOADER_BIN_ADDR=0x0
+PARTITION_TABLE="build/partition_table/partition-table.bin"
+PARTITION_TABLE_ADDR=0x8000
+CONFIG_BIN_ADDR=0x9000
+MINER_BIN="build/esp-miner.bin"
+MINER_BIN_ADDR=0x10000
+WWW_BIN="build/www.bin"
+WWW_BIN_ADDR=0x410000
+OTA_BIN="build/ota_data_initial.bin"
+OTA_BIN_ADDR=0xf10000
+
+BINS_DEFAULT=($BOOTLOADER_BIN $PARTITION_TABLE $MINER_BIN $WWW_BIN $OTA_BIN)
+BINS_AND_ADDRS_DEFAULT=($BOOTLOADER_BIN_ADDR $BOOTLOADER_BIN $PARTITION_TABLE_ADDR $PARTITION_TABLE $MINER_BIN_ADDR $MINER_BIN $WWW_BIN_ADDR $WWW_BIN $OTA_BIN_ADDR $OTA_BIN)
+
+function show_help() {
+    echo "Creates combined binaries using esptool's merge_bin command for multiple config files"
+    echo "Usage: $0 [OPTION]"
+    echo "    Options:"
+    echo "        -c: Process all config-*.bin files in the current directory"
+    echo "        -h: Show this help message"
+    echo
+}
+
+function print_with_error_header() {
+    echo "ERROR:" $1
+}
+
+#### MAIN ####
+
+# Check if esptool.py is installed and accessible
+if ! command -v esptool.py &> /dev/null; then
+    echo "esptool.py is not installed or not in PATH. Please install it first."
+    echo "pip install esptool"
+    exit 1
+fi
+
+OPTIND=1  # Reset in case getops has been used previously
+
+# default values
+process_configs=0
+
+while getopts "hc" opt; do
+    case "$opt" in
+        h)
+            show_help
+            exit 0
+            ;;
+        c)  process_configs=1
+            ;;
+        *)
+            show_help
+            exit 1
+     esac
+done
+
+shift $((OPTIND-1))
+
+if [ "$process_configs" -eq 0 ]; then
+    print_with_error_header "No option specified. Use -c to process config files."
+    show_help
+    exit 2
+fi
+
+# Process all config-*.bin files
+for config_file in config-*.bin; do
+    if [ -f "$config_file" ]; then
+        # Extract the number from the config filename
+        config_number=$(echo $config_file | sed 's/config-\(.*\)\.bin/\1/')
+
+        # Create the output filename
+        output_file="esp-miner-factory-$config_number.bin"
+
+        # Prepare the bins and addresses array with the current config file
+        BINS_AND_ADDRS_WITH_CONFIG=(${BINS_AND_ADDRS_DEFAULT[@]} $CONFIG_BIN_ADDR $config_file)
+
+        # Call esptool.py with the specified arguments
+        esptool.py --chip esp32s3 merge_bin --flash_mode dio --flash_size 16MB --flash_freq 80m "${BINS_AND_ADDRS_WITH_CONFIG[@]}" -o "$output_file"
+
+        # Check if esptool.py command was successful
+        if [ $? -eq 0 ]; then
+            echo "Successfully created $output_file"
+        else
+            print_with_error_header "Failed to create $output_file"
+        fi
+    fi
+done
+
+echo "Processing complete."