Skip to content

Raspberry pi configuration guide for the project

Notifications You must be signed in to change notification settings

WHEEL-E/Pi-Config

Repository files navigation

Pi-config

Steps to configure Pi

  1. Copy ssh and wpa_supplicant files to the pi root directory
  2. Power on the pi and use putty to connect to it
    • Set the Host Name field to raspberrypi.local
    • Port should be set to 22
    • Connection type should be set to SSH
    • The default user name is: pi
    • The default password is: raspberry
  3. Open raspberrypi configuration sudo raspi-config
  4. Enable VNC, Serial, Camera and Expand filesystem
  5. Complete the setup using bash setup.txt

Run script at startup

sudo nano /etc/rc.local