Releases: Ultimaker/Cura
Releases · Ultimaker/Cura
UltiMaker Cura 5.9.0
New features and improvements:
Scarf seam settings
New settings have been added in experimental that let you turn your Z seam into a scarf seam.
- Scarf Seam Length Determines the length of the scarf seam, a seam type that should make the Z seam less visible.
- Scarf Seam Start Height The ratio of the selected layer height after which the scarf seam will begin.
- Scarf Seam Split Distance Determines the length of each step in the flow change when extruding along the scarf seam. A smaller distance will result in a more precise but also more complex G-code.
- Outer Wall Start Speed Ratio This is the ratio of the top speed to start with when printing an outer wall.
- Outer Wall (start) Acceleration This is the acceleration with which to reach the top speed when printing an outer wall
- Outer Wall End Speed Ratio This is the ratio of the top speed to end with when printing an outer wall.
- Outer Wall (end) Deceleration This is the deceleration with which to end printing an outer wall.
- Outer Wall Speed Split Distance This is the maximum length of an extrusion path when splitting a longer path to apply the outer wall acceleration/deceleration. A smaller distance will create a more precise but also more verbose G-Code
Try it for yourself using the showcase model for this release!
Updated the Start and End G-code
It is now possible to include conditional statements such as If/Else statements when editing the start and end G-code in your machine settings. This allows you to set up much more complex printer automation that responds to things such as the status of your printer or user input. Learn more about the possibilities on our wiki.
Added the "Extra Infill Lines to Support Skins
And other improvements to help make printing over sparse infill more reliable, contributed by @Hello1024
More Improvements:
- Introduced Build Fan Speed at Height, Build Fan Speed at Layer, and Build Volume Fan Number to control extra fans, like those controlling the build volume separately
- Significant UI speed improvements interacting with custom settings especially if your printer has multiple extruders
- Introduced an Anycolor option for the UltiMaker S and F series enabling you to print with any UltiMaker color loaded in the material station that is compatible with the printjobs. Note that it’s only compatible with the latest version of the firmware (for Factor 4 >=10.1 and for S-series >=9.0, and it does not include the UltiMaker S3)
- Added an option to Export Package for Technical Support to the help menu, it includes a project file with the settings but also the logs
- Improved the way materials are selected when using multiple extruders to print the build plate adhesion so it doesn't default to the first extruder but the best option instead.
- Improved processes so not only installers but also executables inside installers are signed for Windows
- Introduced improvements to how models and projects with large file size (500MB) slice. A message was also added to inform the user when a file size is too big to slice.
- Made it possible for multiple Engine plugins that are registered to the same slot to be used together. (Only for Modify plugins, and Plugins will be addressed alphabetically)
- Moved the Gradual Flow Engine Plug-in to CuraEngine, this also resolved slicing crashes when the plugin was used in combination with large number of smaller models that were printed at once.
- Improved and expanded the Insert at Layer Change post-processing script, contributed by @GregValiant
- Improved and expanded the Time Lapse Post Processing script, contributed by @GregValiant
- Added a registry entry to provide the option to silent uninstall on Windows, contributed by @Rotzbua
Bug fixes:
- Fixed a crash that would occur when renaming profile names that would result in changing the order of the profiles, resolves #19522
- Fixed a bug so objects in a 3MF reload in the same position as they were saved again, contributed by @nilsiism
- Fixed an issue where overhanging walls and walls that were adjacent to overhanging walls were not printed at the correct speed
- Fixed a bug that prevented the "Sync materials with printers" page from displaying when accessed immediately after starting Cura or signing in
- Fixed a bug where reloading an updated model would not update the duplicates of the model on the build plate, resolves #19031
- Fixed a bug that showed incompatible materials when switching between printers with a different filament diameter.
- Fixed a bug where tree support in enclosed holes has missing layers
- Made improvements in the G-codePathModify slot for Engine Plugins, contributed by @ThomasRahm
- Fixed a bug that prevented changes to the initial layer diameter from being applied properly in tree support, contributed by @ThomasRahm
- Fixed a rounding issue in the engine math, @0x5844
Bugs resolved since the Beta release
- Spiralize outer contour no longer adds unnecessary seams to the model, resolves #19814
- When coasting is enabled the printhead no longer drops down, resolves #19810
- Fixed coasting strategy so it's only applied to outer/inner walls, and not to skin, top-bottom, or infill
- Fixed wiping direction when printing a single wall, resolves #19843
- Improved wiping in combination with the scarf seam, resolves #19860
- Significantly improved the strategy for sharpest corner - smart hiding seam location combination
- Fixed a bug where long scarf seam length and short scarf seam steps would result in the seam being moved outward
- Fixed a bug where seam acceleration and deceleration around seam were not working
- Fixed a bug where infill was wrongly removed from narrow spaces, resolves #19478
- Triple-clicking values and searches that you entered now has you select everything so you can edit it in the field similar to other desktop applications
- Updated dependencies and improved how unwanted and unused binaries are excluded from the building process.
- Added Eazao material for the new Eazao printers
- Updated the urls schemes to make them more robust when attempting to open files in Cura
- Retract before outer wall now works correctly on all layers, resolves #19876
- Resolved top reported crashes coming in via the analyzing tool Sentry
- Removed an unwanted Z-hop when starting a new layer
- Layer starts are more visible in the print preview with the scarf seam
- Made the X to close floating and pop up windows a little bigger
- Improved the visuals of printers with a build plate texture, they now render more consistently regardless of zoom or angle of view
- The UI now displays correctly on Wayland, with this fix we noticed some performance drop compared to X11
Introduced Makerbot Sketch Sprint
The new lightning-fast MakerBot Sketch Sprint has been released and is now supported inside of Cura.
Learn more about our fastest classroom printer; MakerBot Sketch Sprint
More Printers and Profiles
- Introduced Makerbot Sketch and Sketch Large
- Introduced new materials to the UltiMaker Method series, ABS, PETG, Nylon-CF, and Tough PLA
- Introduced new materials for Labs Extruder of the UltiMaker Method series, BASF Ultrafuse 316L, TPE SEBS 1300 95A, and Polymax PC. Except BASF Ultrafuse 316L is not available on the Method XL.
- Various setting improvements for ABS and Nylon for UltiMaker Method series
- Various setting improvements for dual extrusion support for the UltiMaker Method series
- Implemented a hard limit so the bed temperature cannot be more than 120°C on all UltiMaker printers.
- Fixed an error in the profile Ultimaker 2 profile naming
- Introduced the Creality CR-M4, contributed by @kixell
- Introduced Eazao M500, M600, M700, and Potter, and updated the Eazao Zero, contributed by @Eazo
- Introduced ZYYX+ and ZYYX Pro, contributed by @theodorhansson
- Updated acceleration settings for the Creality Ender-2 V3 SE, contributed by @T9Air
Community Translations
Contributors
Hello1024, Patola, and 10 other contributors
Assets 10
UltiMaker Cura 5.9.0-beta.2
This second beta introduces a change that affects the UI so please use buttons, dropdowns, menus, and flows. We hope we did this correctly but it is a tricky change. If you see a crash please report it to us, and we will also see it show up in our crash tracking tool.
New features and improvements:
Scarf seam settings
New settings have been added in experimental that let you turn your Z seam into a scarf seam. They are Scarf Seam Length, Scarf Seam Start Height, and Scarf Seam Split Distance
Try it for yourself using the showcase model for this release!
Updated the Start and End G-code
Introduce edit options (for both Machine and Extruder) to include If/Else statements and formulas
Added the "Extra Infill Lines to Support Skins
+Other improvements to help make printing over sparse infill more reliable, contributed by @Hello1024
Other features and improvements:
- Significant UI speed improvements interacting with custom settings especially if your printer has multiple extruders
- Introduced Build Fan Speed at Height, Build Fan Speed at Layer, and Build Volume Fan Number to control extra fans, like those controlling the build volume separately
- Introduced an Anycolor option for the UltiMaker S and F series enabling you to print with any UltiMaker color loaded in the material station that is compatible with the printjobs. Note that it’s only compatible with the latest version of the firmware (for Factor 4 >=10.1 and for S-series >=9.0)
- Added an option to Export Package for Technical Support to the help menu, it includes a project file with the settings but also the logs
- Improved the way materials are selected when using multiple extruders to print the build plate adhesion so it doesn't default to the first extruder but the best option instead.
- Improved processes so not only installers but also executables inside installers are signed for Windows
- Introduced an error message that informs when a file is too big to slice
- Made it possible for multiple Engine plugins that are registered to the same slot to be used together. (Only for Modify plugins, and Plugins will be addressed alphabetically)
- Moved the Gradual Flow Engine Plug-in to CuraEngine instead
- Improved and expanded the Insert at Layer Change post-processing script, contributed by @GregValiant
- Improved and expanded the Time Lapse Post Processing script, contributed by @GregValiant
- Added a registry entry to provide the option to silent uninstall on Windows, contributed by @Rotzbua
Bug fixes:
- Fixed a crash that would occur when renaming profile names that would result in changing the order of the profiles
- Fixed a bug so objects in a 3MF reload in the same position as they were saved again, contributed by @nilsiism
- Fixed an issue where overhanging walls and walls that were adjacent to overhanging walls were not printed at the correct speed
- Fixed a bug that prevented the "Sync materials with printers" page from displaying when accessed immediately after starting Cura or signing in
- Fixed a bug where reloading an updated model would result in not all the duplicates of the model being updated
- Fixed a bug that showed incompatible materials when switching between printers with a different filament diameter.
- Fixed a bug where tree support in enclosed holes have missing layers
- Made improvements in the G-codePathModify slot for Engine Plugins, contributed by @ThomasRahm
- Fixed a bug that prevented changes to the initial layer diameter from being applied properly, contributed by @ThomasRahm
- Fixed a rounding issue in the engine math, @0x5844
Bugs resolved after the first Beta
- Spiralize outer contour no longer adds unnecessary seams to the model
- When coasting is enabled the printhead no longer drops down
- Updated the strategy for sharpest corner - smart hiding seam location combination
- Fixed a bug where long scarf seams and short scarf seam steps would result in the seam being moved outward
- Fixed a bug where seam acceleration and deceleration were not working
- Fixed a bug where infill was wrongly removed from narrow spaces
- Triple-clicking values and searches that you entered now has you select everything so you can edit it in the field similar to other desktop applications
- Updated dependencies and improved how unwanted and unused binaries are excluded from the building process.
- Added Eazao material for the new Eazao printers
Printer definitions, profiles, and materials:
- Introduced Makerbot Sketch Sprint
- Introduced Makerbot Sketch and Sketch Large
- Introduced new materials to the UltiMaker Method series, ABS, PETG, Nylon-CF, and Tough PLA
- Introduced Labs Extruder for the UltiMaker Method series together with BASF Ultrafuse 316L, TPE SEBS 1300 95A, and Polymax PC. Except BASF Ultrafuse 316L is not available on the Method XL.
- Various setting improvements for ABS and Nylon for UltiMaker Method series
- Various setting improvements for dual extrusion support for the UltiMaker Method series
- Implemented a hard limit so the bed temperature cannot be more than 120C on all UltiMaker printers.
- Introduced the Creality CR-M4, contributed by @kixell
- Introduced Eazao M500, M600, M700, and Potter, and updated the Eazao Zero, contributed by @Eazo
- Introduced ZYYX+, ZYYX Pro, and ZYYX Pro ii, contributed by @theodorhansson
- Updated acceleration settings for the Creality Ender-2 V3 SE, contributed by @T9Air
Community Translations
Known issues
- There is a slight regression in terms of seam alignment in different strategies we hope to resolve before stable
- We see an increase in micro-segments in the outer wall, which we hope to resolve before stable
- We see rare cases of Cura crashing after opening project files with custom extruders or printer settings than the printer that is already loaded
Contributors
Hello1024, Patola, and 10 other contributors
Assets 10
UltiMaker Cura 5.9.0-beta.1
With release of 5.9.0-beta.2 we strongly advise you to use that build for testing. See the list of known issues for the beta.1 for clarity
New features and improvements:
Scarf seam settings
New settings have been added in experimental that let you turn your Z seam into a scarf seam. They are Scarf Seam Length, Scarf Seam Start Height, and Scarf Seam Split Distance
Try it for yourself using the showcase model for this release!
Updated the Start and End G-code
Introduce edit options (for both Machine and Extruder) to include If/Else statements and formulas
Added the "Extra Infill Lines to Support Skins
+Other improvements to help make printing over sparse infill more reliable, contributed by @Hello1024
Other features and improvements:
- Significant UI speed improvements interacting with custom settings especially if your printer has multiple extruders
- Introduced Build Fan Speed at Height, Build Fan Speed at Layer, and Build Volume Fan Number to control extra fans, like those controlling the build volume separately
- Introduced an Anycolor option for the UltiMaker S and F series enabling you to print with any UltiMaker color loaded in the material station that is compatible with the printjobs. Note that it’s only compatible with the latest version of the firmware (for Factor 4 >=10.1 and for S-series >=9.0)
- Added an option to Export Package for Technical Support to the help menu, it includes a project file with the settings but also the logs
- Improved the way materials are selected when using multiple extruders to print the build plate adhesion so it doesn't default to the first extruder but the best option instead.
- Improved processes so not only installers but also executables inside installers are signed for Windows
- Introduced an error message that informs when a file is too big to slice
- Made it possible for multiple Engine plugins that are registered to the same slot to be used together. (Only for Modify plugins, and Plugins will be addressed alphabetically)
- Moved the Gradual Flow Engine Plug-in to CuraEngine instead
- Improved and expanded the Insert at Layer Change post-processing script, contributed by @GregValiant
- Improved and expanded the Time Lapse Post Processing script, contributed by @GregValiant
- Added a registry entry to provide the option to silent uninstall on Windows, contributed by @Rotzbua
Bug fixes:
- Fixed a crash that would occur when renaming profile names that would result in changing the order of the profiles
- Fixed a bug so objects in a 3MF reload in the same position as they were saved again, contributed by @nilsiism
- Fixed an issue where overhanging walls and walls that were adjacent to overhanging walls were not printed at the correct speed
- Fixed a bug that prevented the "Sync materials with printers" page from displaying when accessed immediately after starting Cura or signing in
- Fixed a bug where reloading an updated model would result in not all the duplicates of the model being updated
- Fixed a bug that showed incompatible materials when switching between printers with a different filament diameter.
- Fixed a bug where tree support in enclosed holes have missing layers
- Made improvements in the G-codePathModify slot for Engine Plugins, contributed by @ThomasRahm
- Fixed a bug that prevented changes to the initial layer diameter from being applied properly, contributed by @ThomasRahm
- Fixed a rounding issue in the engine math, @0x5844
Printer definitions, profiles, and materials:
- Introduced Makerbot Sketch Sprint
- Introduced Makerbot Sketch and Sketch Large
- Introduced new materials to the UltiMaker Method series, ABS, PETG, Nylon-CF, and Tough PLA
- Introduced Labs Extruder for the UltiMaker Method series together with BASF Ultrafuse 316L, TPE SEBS 1300 95A, and Polymax PC. Except BASF Ultrafuse 316L is not available on the Method XL.
- Various setting improvements for ABS and Nylon for UltiMaker Method series
- Various setting improvements for dual extrusion support for the UltiMaker Method series
- Implemented a hard limit so the bed temperature cannot be more than 120C on all UltiMaker printers.
- Introduced the Creality CR-M4, contributed by @kixell
- Introduced Eazao M500, M600, M700, and Potter, and updated the Eazao Zero, contributed by @Eazo
- Introduced ZYYX+, ZYYX Pro, and ZYYX Pro ii, contributed by @theodorhansson
- Updated acceleration settings for the Creality Ender-2 V3 SE, contributed by @T9Air
Known Issues
- Spiralize outer contour adds unnecessary seams to the model
- When coasting is enabled it adds Z0.00 commands causing the head to drop down
- Regression for the seam location on round surfaces
- Seam acceleration and deceleration not working
Community Translations
Become a sponsor
If you like UltiMaker Cura, you can show your support with whatever you can miss. Every little bit helps. 🤗Contributors
Hello1024, Patola, and 10 other contributors
Assets 10
UltiMaker Cura 5.8.1
Bug fixes:
- Fixed an issue where materials could not be synced to UltiMaker Printers.
If you still run into trouble, please consult this troubleshooting page.
Profile Improvements
- Significant improvements for PVA and TPU 95A profiles for UltiMaker Factor 4
UltiMaker Cura 5.8.0
New features and improvements
New Z Seam Settings
New settings have been added that let you tweak how and where the Z seam is placed
- "Z Seam On Vertex" allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly
- "Seam overhang angle" enables you to select the angle at which Z seams will not be printed on overhangs, resolves #9369
- "Support Z Seam Away from Model" and "Min Z Seam Distance from Model" define where the Z seam is placed on supports
Try it for yourself with this toast post-it holder.
Newly introduced Settings
- “Support Infill Density Multiplier Initial Layer”, “Raft Infill Overlap Percentage”, Raft Surface Z Offset, and Raft Flow settings to improve dual extrusion rafts
- “Cooling during extruder switch" to define the cooling fan behavior during an extruder switch by defining Unchanged, Only last extruder, All fans
- Updated the "Interleaved Prime Tower" with "Prime Tower Minimum Shell Thickness" so it uses less filament, contributed by @wawanbreton
Other Improvements
- A search bar has been added to the “Add an offline printer” list, resolves #16716
- Updated the retract behavior for a nozzle switch to reduce the chance of oozing
- Updated Insert at Layer Change Post Processing Script so layers can be skipped, contributed by @tastyratz
Bug Fixes
- Fixed a bug that caused spiked objects to have missing layers, thanks to @ThomasRahm
- Updated the text in the Open Universal Cura Project (UCP) file to be more correct
- Fixed the interpolated values for fan speeds and improved the check for minimum layer time, resolves #5409
- Fix a bug where material_print_temp_prepend not being disabled, resolves #19204
- Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y, resolves #19156
- Fixed a bug where a slice would fail if the overhang angle was set to 90 degrees
- Fixed a bug where infill lines are going through the model with a certain setting combination, resolves, #18970, contributed by @ThomasRahm
- Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperatures, contributed by @GregValiant
Bugs resolved during the Beta
- Fixed a bug where gaps would appear in generated tree support, resolves #19442
- Raft-related values that appeared incorrectly when switching extruders now show the correct values
- Seam not on Vertex has been fixed for multiple models on the buildplate
- Exported cura:setting keys in material definitions now correctly shows True instead of yes
- .makerbot file types are now selected by default when saving those files to the Digital Library
- For the UltiMaker Method series machines Support Interface, Tower, and Horizontal Expansion settings have been updated.
- For all UltiMaker Machines the Zseam settings have been updated so they are smartly hidden, except for the visual intents.
Printer definitions, profiles, and materials:
- Introduced the Ultimaker Method with PLA, PVA, and N12CF profiles and intents
- Improved dual-support settings for UltiMaker Sline and Method printers
- Expanded and updated intents for Factor 4
- Updated CPE and PC settings to improve surface quality for Factor 4
- Introduced Creality Ender 3 V3 KE, contributed by @vadim-danilchik, @daitj, @VladislavVidenov, @fjventura20
- Introduced Voron2 StealthChanger 250, StealthChanger 300, and StealthChanger 350, contributed by @TheSin-
- Introduced K1 Max, contributed by @itay-grudev
- Introduced Ankermake M5C, contributed by @augustchi
- Introduced WEEDO F150S, F152S, F370, ME40, ME40 Lite, and X40 V3+, contributed by @WinstonMao
Become a sponsor
If you like UltiMaker Cura, you can show your support with whatever you can miss. Every little bit helps. 🤗Contributors
wawanbreton, tastyratz, and 10 other contributors
Assets 10
UltiMaker Cura 5.8.0-beta.1
New features and improvements
New Z Seam Settings
New settings have been added that let you tweak how and where the Z seam is placed
- "Z Seam On Vertex" allows you to choose if the Z seam is placed on the vertices closest to a selected Z seam position or if it instead follows the selected position exactly
- "Seam overhang angle" enables you to select the angle at which Z seams will not be printed on overhangs, resolves #9369
- "Support Z Seam Away from Model" and "Min Z Seam Distance from Model" define where the Z seam is placed on supports
Try it for yourself with this toast post-it holder.
Newly introduced Settings
- “Support Infill Density Multiplier Initial Layer”, “Raft Infill Overlap Percentage”, Raft Surface Z Offset, and Raft Flow settings to improve dual extrusion rafts
- “Cooling during extruder switch" to define the cooling fan behavior during an extruder switch by defining Unchanged, Only last extruder, All fans
- Updated the "Interleaved Prime Tower" with "Prime Tower Minimum Shell Thickness" so it uses less filament, contributed by @wawanbreton
Other Improvements
- A search bar has been added to the “Add an offline printer” list, resolves #16716
- Updated the retract behavior for a nozzle switch to reduce the chance of oozing
- Updated Insert at Layer Change Post Processing Script so layers can be skipped, contributed by @tastyratz
Bug Fixes
- Fixed a bug that caused spiked objects to have missing layers, thanks to @ThomasRahm
- Updated the text in the Open Universal Cura Project (UCP) file to be more correct
- Fixed the interpolated values for fan speeds and improved the check for minimum layer time, resolves #5409
- Fix a bug where material_print_temp_prepend not being disabled, resolves #19204
- Reduced the chance that oozing in the first travel move will cause a scar on the bottom of the model by updating the Layer Start X and Y, resolves #19156
- Fixed a bug where a slice would fail if the overhang angle was set to 90 degrees
- Fixed a bug where infill lines are going through the model with a certain setting combination, resolves, #18970, contributed by @ThomasRahm
- Updated the temperature values in the monitor page to reflect the initial instead of the final bed and print temperatures, contributed by @GregValiant
Printer definitions, profiles, and materials:
- Introduced the Ultimaker Method with PLA, PVA, and N12CF profiles and intents
- Improved dual-support settings for UltiMaker Sline and Method printers
- Expanded and updated intents for Factor 4
- Updated CPE and PC settings to improve surface quality for Factor 4
- Introduced Creality Ender 3 V3 KE, contributed by @vadim-danilchik, @daitj, @VladislavVidenov, @fjventura20
- Introduced Voron2 StealthChanger 250, StealthChanger 300, and StealthChanger 350, contributed by @TheSin-
- Introduced K1 Max, contributed by @itay-grudev
- Introduced Ankermake M5C, contributed by @augustchi
- Introduced WEEDO F150S, F152S, F370, ME40, ME40 Lite, and X40 V3+, contributed by @WinstonMao
Known Issue
On our UltiMaker Method series machines:
- Some raft-related values might initially appear incorrect in the printer settings list; but rest assured, they are correct and you can see them show up correctly when you refresh the fields by Collapsing All Categories with the hamburger next to the search and search for your setting again.
- If you are experiencing some trouble having the model material stick to the PVA in the default settings, you can consider updating the support top distance 0.4 --> 0 and support roof line width 0.25 --> 0.4
Become a sponsor
If you like UltiMaker Cura, you can show your support with whatever you can miss. Every little bit helps. 🤗Contributors
wawanbreton, tastyratz, and 10 other contributors
Assets 10
UltiMaker Cura 5.7.2
Bugfixes
- Fixed a bug where modifier meshes and support meshes were not loaded in the correct position, should resolve #18761 (and 5axes/SpoonAntiWarping#8)
- Primeblobs were not printed for a second extruder
- Interleaved prime tower can now be printed with a raft
- Improved behaviors for start temperature for multiple extruders
- Improved preheating logic when using a raft with multiple extruders
- Enabled Raft Remove Inside Corners and Prime Tower Mode to be shipped with a material profile
UltiMaker Cura 5.7.1
Introducing the UltiMaker Factor 4
- Included support for the new UltiMaker Factor 4, the new 0.6 UltiMaker HT print core, and the new Ultimaker PPS CF material.
For an overview of the new features in the UltiMaker Factor 4, please watch our video.
Bug fixes:
- Fixed a bug where support lines were printed multiple times
Printer definitions, profiles and materials:
- Updated ASA, SR30, and Nylon12-CF profiles for MethodX and Method XL Printers
UltiMaker Cura 5.7.0
New features and improvements
Universal Cura Project files
Universal Cura Project files contain models and settings and can be shared with people who have different printers. They can be used on any printer and they allow you to include positional data for the models on your build plate as well as select settings. Visit our Thingiverse page to download this amazing Dinosaur SD Card Holder to try the ease of sharing settings yourself.
Open print files directly from Thingiverse
You can now open files in Cura directly from Thingiverse with a single click. You can find a “Open in Cura” button on all compatible file types which includes models that use the STL, 3MF, and OBJ file extension. Doing so will load the file into Cura just as if you had downloaded it and opened it normally with the added advantage that your downloads folder will not get clogged. Visit Thingiverse to try it out for yourself.
Newly introduced Settings
- Settings that define the raft offset for top, middle and bottom raft layers
- Brim only on the inside setting, resolves #2853
- Introduced a new Prime tower type: Interleaved, next to the current Normal, contributed by @wawanbreton
- Apply Monotonic ordering to the Raft Top Surface
- Raft Wall Line Count for the Bottom, Middle, and Top of the raft
- Allowing to define print sequence manually, contributed by @alexandr-vladimirov
MethodX and MethodXL specific improvements
For the best experience with your MethodX and MethodXL please update to 5.7.1
- Enabled Print over Cloud for UltiMaker MethodX and Method XL printers
- Introduced ASA, SR30, and Nylon12-CF profiles for MethodX and Method XL Printers. The latest firmware version that supports these materials is available here.
- Improved the predicted printing time so it's closer to the actual printing time on the MethodX and MethodXL
- Improved the idle nozzle temperature for dual extrusion printing on MethodX and MethodXL
- Resolved a crash for the Method printer when navigating to the Monitor tab
- Improved the way that the fanspeeds were listed and controlled for MethodX and MethodXL printers
- Updated Raft settings for UltiMaker MethodX and MethodXL
- Enabled Monotonic Raft Surface to improve adhesion
- Increased the Minimum Retract Distance to improve infill pattern wall overlaps
Other improvements
- Introduced an analyzing tool in the cura engine to better track slicing crashes, and started fixing the biggest reports coming in.
- The play speed of the nozzle in the preview is now closer to the movement of the printhead
- Introduced an option to choose Drop Model to Buildplate every time a project file is loaded
- Introduced DisplayInfoOnLCD Post Processing Script which combines DisplayFilenameAndLayerOnLCD with DisplayProgress, contributed by @GregValiant
- Introduced alternative camera navigation similar to FreeCAD Trackpad, contributed by @quarnster
Bug fixes
- Resolved significantly slower slicing for models with a lot of holes
- A significant amount of crashes have been resolved that are caused by self intersecting polygons
- Align to Buildplate did not work for grouped meshes, resolves #14237
- The models in a 3mf file would not load in their saved position, please note that this also changes the behavior of the "import models" feature of a 3mf file, for this feature the saved model location will be ignored
- Reduced the amount of floating support in areas near the support overhang angle threshold
- Fixed a bug with the Initial Extruder Number in the start gcode, resolves #17501
- Fixed a bug where Z could be negative if Remove Empty Layers was enabled, resolves #15975
- Pressing the Esc key now doesn't exiting full screen mode, contributed by @Sophist-UK, resolves #7499
- Improved the OAuth protocol to improve signing in with plug-ins, contributed by @wawanbreton
- Fixed tree support-related crashes if there are no overhangs, contributed by @ThomasRahm
- Fixed some slicing crashes with tree support, contributed by @ThomasRahm
- Fixed available height when adding modifier mesh in One at a Time printing, contributed by @fieldOfView resolves #16566
- Improved behavior for loading 3mfs by giving the models original names, contributed by @pietchaki, resolves #12089
- Added an error so LimitXYAccelJerk doesn't run unless Accel Control is enabled in Cura, contributed by @GregValiant
- Some helpful code cleanup contributed by @dmitrygribenchuk
Bugs resolved since the Beta Release:
- Resolved some crashes when opening project files
- Resolved the biggest crashes coming in via the analyzing tool in the cura engine
- Added links to support pages for Method materials to help find the best material compatibility
- Introduced several visual improvements for the loading Universal Cura Projects window
- Universal Cura Projects will now be opened in the center of the buildplate
- The prime tower no longer primes extruders that are not being used
- Fixed file association for stl, obj, 3mf, gcode, and ufp for MacOS
- MacOS users can use the open menu multiple times in a row again
- The support type is now updated in recommended when it’s changed in custom
- The skirt height is now generated on the innermost skirt instead of the outermost skirt again
- Fixed the skirt distance for dual extrusion printers
- The Brim Only Inside setting will not generate a brim on support when it’s not defined
- Fixed a bug where the project name would accidentally revert after saving, resolves #11276
- Improved handling of a fractional layer with tree support, contributed by @ThomasRahm
Profiles and materials:
- Introduced high-speed profiles for the layer heights <0.15mm for Ultimaker PLA, T-PLA, ABS and PETG.
- Updated Initial Layer Speed settings for UltiMaker S3, and UltiMaker S5
- Updated the Shrinkage Factor for PET CF to improve dimensional accuracy
- Improved self-support settings for UltiMaker Materials
- Renamed UltiMaker PP Transparent to UltiMaker PP Natural
- Increased part strengths of high-speed modes by compensating for slip in high flow rates
- Improved adhesion settings for UltiMaker ABS
New and updated printers
- Introduced Elegoo Neptune 4 Plus and Max, and updated Elegoo Neptune 4 and Pro, contributed by @mastercaution, @BremerButjer, @gsthnz, @ArthurREGNARD, @NovaScotianNorse, @ToasterUwU, @CharlKlein, @si0ls, @AlbeDarned @fuji97 and @Ev1dentFir3
- Introduced Anycubic Kobra 2 Printer Definition contributed by @ThatGuyZim
- Introduced Flying Bear Ghost 6, contributed by @Barrnet
- Introduced Creality Ender 3 V2 Neo, contributed by @Hougaard22
- Introduced Dagoma Sigma Pro 500z, and Dagoma Sigma Pro 500z Dual, contributed by @0r31
- Introduced RRatRig V-Core 3, 200mm, 300mm, 400mm, 500mm and RatRig V-Minion, contributed by @Nu-hin
- Introduced Flashforge Adventurer 3 (AD3 / AD3C / AD3 Lite / AD3 Pro) & Adventurer AD4, and AD4 Lite , contributed by @Jeremie-C
- Updated the dimensions for Ender 3 V3 S, contributed by @mcuprojects
- Updated start Gcode for creality_ender3v3se & Anycubic Kobra Go/Kobra 2, contributed by @zanghao912
- Updated print and retraction settings for Sovol 3D printers, contributed by @Asterchades
- Updated Creality Ender 5 Plus Bed Leveling Command, contributed by @dsnsgithub
- Updated Voron definition to support Voron/Klipper, contributed by @NerdyGriffin
Tips for using the Universal Cura Projects on Thingiverse
- When you are finished with your Universal Cura Project, we recommend starting a new project to reset the settings that came with the project. You can do this by clicking File > New Project.
- If you want to open multiple files from Thingiverse on a single buildplate. You might have to change some default settings in your preferences. You can do this by clicking Preferences > Configure Cura. Scroll down to enable the setting Use a single instance of Cura and disable Clear buildplate before loading model into the single instance
Contributors
fieldOfView, wawanbreton, and 29 other contributors
Assets 10
UltiMaker Cura 5.7.0-beta.1
New features and improvements
Universal Cura Project files
Universal Cura Project files contain models and settings and can be shared with people who have different printers. They can be used on any printer and they allow you to include positional data for the models on your build plate as well as select settings. Visit our Thingiverse page to download this amazing Dinosaur SD Card Holder to try the ease of sharing settings yourself.
Newly introduced Settings
- Settings that define the raft offset for top, middle and bottom raft layers
- Brim only on the inside setting, resolves #2853
- Introduced a new Prime tower type: Interleaved, next to the current Normal, contributed by @wawanbreton
- Apply Monotonic ordering to the Raft Top Surface
- Raft Wall Line Count for the Bottom, Middle, and Top of the raft
- Allowing to define print sequence manually, contributed by @alexandr-vladimirov
MethodX and MethodXL specific improvements
For the best experience with your MethodX and MethodXL please update to 5.7.1
- Enabled Print over Cloud for UltiMaker MethodX and Method XL printers
- Introduced ASA, SR30, and Nylon12-CF profiles for MethodX and Method XL Printers. The latest firmware version that supports these materials is available here.
- Improved the predicted printing time so it's closer to the actual printing time on the MethodX and MethodXL
- Improved the idle nozzle temperature for dual extrusion printing on MethodX and MethodXL
- Resolved a crash for the Method printer when navigating to the Monitor tab
- Improved the way that the fanspeeds were listed and controlled for MethodX and MethodXL printers
- Updated Raft settings for UltiMaker MethodX and MethodXL
- Enabled Monotonic Raft Surface to improve adhesion
- Increased the Minimum Retract Distance to improve infill pattern wall overlaps
Other improvements
- Introduced an analyzing tool in the cura engine to better track slicing crashes, and started fixing the biggest reports coming in.
- The play speed of the nozzle in the preview is now closer to the movement of the printhead
- Introduced an option to choose Drop Model to Buildplate every time a project file is loaded
- Introduced DisplayInfoOnLCD Post Processing Script which combines DisplayFilenameAndLayerOnLCD with DisplayProgress, contributed by @GregValiant
- Introduced alternative camera navigation similar to FreeCAD Trackpad, contributed by @quarnster
Bug fixes
- Resolved significantly slower slicing for models with a lot of holes
- A significant amount of crashes have been resolved that are caused by self intersecting polygons
- Align to Buildplate did not work for grouped meshes, resolves #14237
- The models in a 3mf file would not load in their saved position, please note that this also changes the behavior of the "import models" feature of a 3mf file, for this feature the saved model location will be ignored
- Reduced the amount of floating support in areas near the support overhang angle threshold
- Fixed a bug with the Initial Extruder Number in the start gcode, resolves #17501
- Fixed a bug where Z could be negative if Remove Empty Layers was enabled, resolves #15975
- Pressing the Esc key now doesn't exiting full screen mode, contributed by @Sophist-UK, resolves #7499
- Improved the OAuth protocol to improve signing in with plug-ins, contributed by @wawanbreton
- Fixed tree support-related crashes if there are no overhangs, contributed by @ThomasRahm
- Fixed some slicing crashes with tree support, contributed by @ThomasRahm
- Fixed available height when adding modifier mesh in One at a Time printing, contributed by @fieldOfView resolves #16566
- Improved behavior for loading 3mfs by giving the models original names, contributed by @pietchaki, resolves #12089
- Added an error so LimitXYAccelJerk doesn't run unless Accel Control is enabled in Cura, contributed by @GregValiant
- Some helpful code cleanup contributed by @dmitrygribenchuk
Profiles and materials:
- Introduced high-speed profiles for the layer heights <0.15mm for Ultimaker PLA, T-PLA, ABS and PETG.
- Updated Initial Layer Speed settings for UltiMaker S3, and UltiMaker S5
- Updated the Shrinkage Factor for PET CF to improve dimensional accuracy
- Improved self-support settings for UltiMaker Materials
- Renamed UltiMaker PP Transparent to UltiMaker PP Natural
- Increased part strengths of high-speed modes by compensating for slip in high flow rates
- Improved adhesion settings for UltiMaker ABS
New and updated printers
- Introduced Elegoo Neptune 4 Plus and Max, and updated Elegoo Neptune 4 and Pro, contributed by @mastercaution, @BremerButjer, @gsthnz, @ArthurREGNARD, @NovaScotianNorse, @ToasterUwU, @CharlKlein, @si0ls, @AlbeDarned @fuji97 and @Ev1dentFir3
- Introduced Anycubic Kobra 2 Printer Definition contributed by @ThatGuyZim
- Introduced Flying Bear Ghost 6, contributed by @Barrnet
- Introduced Creality Ender 3 V2 Neo, contributed by @Hougaard22
- Introduced Dagoma Sigma Pro 500z, and Dagoma Sigma Pro 500z Dual, contributed by @0r31
- Introduced RRatRig V-Core 3, 200mm, 300mm, 400mm, 500mm and RatRig V-Minion, contributed by @Nu-hin
- Introduced Flashforge Adventurer 3 (AD3 / AD3C / AD3 Lite / AD3 Pro) & Adventurer AD4, and AD4 Lite , contributed by @Jeremie-C
- Updated the dimensions for Ender 3 V3 S, contributed by @mcuprojects
- Updated start Gcode for creality_ender3v3se & Anycubic Kobra Go/Kobra 2, contributed by @zanghao912
- Updated print and retraction settings for Sovol 3D printers, contributed by @Asterchades
- Updated Creality Ender 5 Plus Bed Leveling Command, contributed by @dsnsgithub
- Updated Voron definition to support Voron/Klipper, contributed by @NerdyGriffin
Contributors
fieldOfView, wawanbreton, and 29 other contributors