Patched version 2.4? #3
Conversation
…k features This is just a repackaging of the patches contained in the upstream repository https://github.com/TinoKossmann/LibreLink-xDrip-Patch and the reduced patch posted by user Gendra in https://insulinclub.de/index.php?thread/31380-libre-2-entschl%C3%BCsselung/&postID=538465#post538465 Kudos to them (and the original author of the patch) for the actual work!
|
Good morning from Spain. Sorry for the question, I'm a Dexcom user looking for an alternative... Does the "new" FreeStyle Libre 2 works with this patched app? Abbott's web here in Spain says it only work with LibreLink 2.4. I've phoned them several times but they are unable to tell me if it will work or not, they don't know if this is really a "new" version of the Libre 2, all they know is what the web says, it only work with LibreLink 2.4 :-( |
|
Hello,
I am just CC'd in this nessage, but I can confirm the patched LL 2.3 works fine with FSL 2. We get nice graphs to Xdrip+ and shared to ud parents' phones.
The only drawback with this version is that it cannot send the data to LibreView server.
Kind regards,
Anttu
shortly with BlueMail for Android
23. huhtik. 2020 klo 12.28, 12.28, JimZam <[email protected]> kirjoitti:
…Good morning from Spain. Sorry for the question, I'm a Dexcom user
looking for an alternative... Does the "new" FreeStyle Libre 2 works
with this patched app? Abbott's web here in Spain says it only work
with LibreLink 2.4. I've phoned them several times but they are unable
to tell me if it will work or not, they don't know if this is really a
"new" version of the Libre 2, all they know is what the web says, it
only work with LibreLink 2.4 :-(
Thank you so much in advance.
--
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub:
#3 (comment)
|
|
Thank you for your quick reply Anttu. Knowing that I'll try Libre 2. |
|
Sorry to bother again. I've just installed the patched app. According to Androidaps, I should see this notification in order the app to work in the backgroud: |
|
I think this notice is not related to the patch.
I just checked the memory and location access rights in the apps settings and started the app.
Anttu
shortly with BlueMail for Android
23. huhtik. 2020 klo 18.12, 18.12, JimZam <[email protected]> kirjoitti:
…Sorry to bother again. I've just installed the patched app. According
to Androidaps, I should see this notification in order the app to work
in the backgroud:
if I run the app, I can see its PID with adb shell pidof
com.freestylelibre.app.de but if I close it from recent apps pidof
doesn't show anything. Is the app correctly patched?
Thank you again
--
You are receiving this because you authored the thread.
Reply to this email directly or view it on GitHub:
#3 (comment)
|
|
Thank you so much. |
|
Hallo ich will gerade meine Libre Patch Datei in Windows vorbereiten mit Debion.Kann aber nur den usernamen eingeben aber nicht ein Passwort kann mir jemand helfen Danke |
|
Hallo kann mir jemand helfen.Ich will Debian auf meine Windows 10 Oberfläche kopieren aber ich kann nur den usernamen eingeben aber nicht das Passwort für Libre Patch .Danke |
|
Windows 10 Rechner Entschuldigung |
|
Is it possible that FL2 had some updates and only works with 2.4? I received a new batch of sensors and having the missed alarm issue since then... Yes, I checked my settings, bluetooth is correctly configured and the sensor is started with the patched app. This is now the 3rd sensor not able to receive alerts. Any thoughts? |
|
Are you able to use it with xDrip+? If so, why do you need the alerts? xDrip+ will alert you... |
The alerts in the patched version is an indicator that the app is connected with the sensor (In my case, xdrip is not receiving data from the app). So, if there is no alert available, no blood sugar values are delivered... |
|
:-( I'm a Dexcom user and wanted to use Libre2. My first post was just about that, everytime I asked Abbott they said Libre2 only works with app version 2.4. I asked if there were a new version of Libre2 and they didn't know. I bought a Libre2 just to try but my Dexcom still works. In any case it's possible the one I have works and the future ones don't, It seems something has changed. |
|
I'm sure you have used Libre2 before and know how to make it work but maybe this could be of any help... |
As I mentioned: The sonsors before worked fine - a newly delivered batch stopped working, now the third sensor. It seems that Abott changed something inside the sensors |
|
Yes, I think so too. Just in case it could help |
|
@JimZam I'm using a miaomiao for turning my Freestlye Libre into a cgm. Unfortunatly there is a xdrip+ issue with some checksums, I'm using the tomato-app. But it is working nicely and is an approved alternative for the patched librelink. |
|
Thank you thomaas. I asked about patched app and Libre 2 at gitter/Androidaps and that's what they answered: "@JimZam there are known issues with Libre2 with serial Numbers starting with the letter K. So far as I know, the Libre2 ist still working with patched App 2.3." On the other hand, is your miaomaio 1 or 2? There is a way to make miaomaio 2 work with xdrip+: Regards |
|
@thomaas Mi Libre 2 is up and running. It's serial begings with 3M. |
wird ja alles nicht so heiß gegessen, wie es gekocht wird 😉 ja ich bin noch etwas frischer dabei (Linux- Ubunutu) Ich hab den Patch vorherregelmassig mit Debian durchgeführt, hatte aber nie eine solche Fehlermeldung. Nach der ausführlichen Problemsuche/Analyse, im Ausschlussverfahren war am Ende nur noch das Antivirensystem da, was es sein konnte. Mich hat halt stutzig gemacht, dass noch kein anderer, hier etwas darüber geschrieben hat, also musste es ja ein Fehler meines systems sein. |
|
@FreDiabetics ja cool. Deshalb habe ich kein Antivir :D |
|
Gibt es bei irgendwem Bestrebungen 2.4 zu patchen? ODer gibt es einen Grund wieso dies bisher nicht erfolgt ist? |
|
Good evening. Just a question about the patched app. I've it up and runnig with xDrip+ and Libre 2, and at the same time I've a Dexcom with xDrip+ variant (for several days the patched app didn't work so I had to use a Dexcom sensor). It works fine but if I try to use xDrip+ with Dexcom and Libre 2 with xdrip+ variant it doesn't, xDrip+ variant doesn't receive Libreview data. Is it due to de patched app only sending data to an app identified somehow as xDrip+ so xDrip+ variant can't get them? |
|
You must activate GPS for librelink patched App.--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 15.07.20, 18:21 schrieb JimZam <[email protected]>:
Good evening. Just a question about the patched app. I've it up and runnig with xDrip+ and Libre 2, and at the same time I've a Dexcom with xDrip+ variant (for several days the patched app didn't work so I had to use a Dexcom sensor). It works fine but if I try to use xDrip+ with Dexcom and Libre 2 with xdrip+ variant it doesn't, xDrip+ variant doesn't receive Libreview data. Is it due to de patched app only sending data to an app identified somehow as xDrip+ so xDrip+ variant can't get them? Just wondering Thank you so much Regards
—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
Thank you, the app is working. My question is why it works with xDrip+ but not with xDrip+ variant1. Is the patched app sending data somehow to one app identifier? I don't know how it works so I'm sorry if what I say doesn't make sense. |
|
Hi! Sorry, How could I get patched apk? Thanks in advance! :) |
|
See the Readme in the project. You need to build the apk by your self. I added a Dockerfile if it helps. |
|
Can someone please tell me if it would be able to activate a FreeStyle Libre Pro sensor with the LibreLink app somehow? Thank you! |
Libre Pro sensor can be activated by the Pro version Reader only ,so it means that you can not do it with Librelink App. Or you can activate Pro sensors with Bubble transmitter and DiaBox app |
|
Hallo Zusammen,bitte nur in Deutsch anschreiben, ich kann leider kein Englisch. Danke und LG Agnes Wirtz--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:01 schrieb bubbledevteam <[email protected]>:
somehow
Libre Pro sensor can be activated by the Pro version Reader only ,so it means that you can not do it with Librelink App.
Or you can activate Pro sensors with Bubble transmitter and DiaBox app
—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
Hi, das bedeutet, das Pro nicht unterstützt ist. Wunder mich, dass Du diese im deutschsprachigen Raum benutzte.Die Lösung ist ein separater Leser " Bubbles"… den Du kaufen und auf den Sensor setzen musst. Dazu gibt dann eine App, über die Werte empfangen werden können.--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:17 schrieb agneswirtz <[email protected]>:
Hallo Zusammen,bitte nur in Deutsch anschreiben, ich kann leider kein Englisch. Danke und LG Agnes Wirtz--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:01 schrieb bubbledevteam <[email protected]>:
somehow
Libre Pro sensor can be activated by the Pro version Reader only ,so it means that you can not do it with Librelink App.
Or you can activate Pro sensors with Bubble transmitter and DiaBox app
—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or unsubscribe.
—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
SorryLeider läuft bei mir alles schief. Versuche immer noch libre2 zu patchen.--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 12:05 schrieb tkcgm <[email protected]>:
Hi, das bedeutet, das Pro nicht unterstützt ist. Wunder mich, dass Du diese im deutschsprachigen Raum benutzte.Die Lösung ist ein separater Leser " Bubbles"… den Du kaufen und auf den Sensor setzen musst. Dazu gibt dann eine App, über die Werte empfangen werden können.--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:17 schrieb agneswirtz <[email protected]>:
Hallo Zusammen,bitte nur in Deutsch anschreiben, ich kann leider kein Englisch. Danke und LG Agnes Wirtz--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:01 schrieb bubbledevteam <[email protected]>:
somehow
Libre Pro sensor can be activated by the Pro version Reader only ,so it means that you can not do it with Librelink App.
Or you can activate Pro sensors with Bubble transmitter and DiaBox app
—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or unsubscribe.
—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
I patched it following this instructions: But you should better try this fork (in the previous instructions use the smos-gh github instead of TinoKossmann): I hope this helps |
|
@agneswirtz Entschuldigung, ich habe Ihren Beitrag nicht gelesen. Verwenden Sie Google Übersetzer und wenn Sie Fragen haben, stellen Sie hier. |
|
Hallo,sende mir eine private E-Mail an [email protected] sende dir dann eine Link, dann bekommst Du die fertige APP von mir--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 12:18 schrieb agneswirtz <[email protected]>:
SorryLeider läuft bei mir alles schief. Versuche immer noch libre2 zu patchen.--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 12:05 schrieb tkcgm <[email protected]>:
Hi, das bedeutet, das Pro nicht unterstützt ist. Wunder mich, dass Du diese im deutschsprachigen Raum benutzte.Die Lösung ist ein separater Leser " Bubbles"… den Du kaufen und auf den Sensor setzen musst. Dazu gibt dann eine App, über die Werte empfangen werden können.--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:17 schrieb agneswirtz <[email protected]>:
Hallo Zusammen,bitte nur in Deutsch anschreiben, ich kann leider kein Englisch. Danke und LG Agnes Wirtz--Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 24.07.20, 10:01 schrieb bubbledevteam <[email protected]>:
somehow
Libre Pro sensor can be activated by the Pro version Reader only ,so it means that you can not do it with Librelink App.
Or you can activate Pro sensors with Bubble transmitter and DiaBox app
—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or unsubscribe.
—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or unsubscribe.
—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
Good morning. I'm having problems with the patched app, xDrip+ loses data and it seems it stops working, no xDrip information in the Notification Area until I scan the sensor and Librelink has a new reading. In a few seconds xDrip works again. Any idea if this is an xDrip or LibreLink issue? I've tried several xDrip nightbuilds and it's always the same. Edit: I'll turn on Alarms in LibreLink next time xDrip loses data and check if it works. This way I'll see if it's a matter of xDrip or LibreLink. |
|
HalloBitte in Deutsch anschreiben, da ich leider kein Englisch sprechen und lesen kann. LG AGNES WIRTZ --Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.Am 05.08.20, 12:26 schrieb JimZam <[email protected]>:
Good morning. I'm having problems with the patched app, xDrip+ loses data and it seems it stop working, no xDrip information in the NavBar not in the Notification Area until I scan the sensor and Librelink has a new reading. In a few seconds xDrip works again. Any idea if this is an xDrip or LibreLink issue? I've tried several xDrip nightbuilds and it's always the same. Thank you in advance Regards
—You are receiving this because you were mentioned.Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
is the version 2.3.0.4751 from 2019-04-02 still the actual one? |
|
I have been using the patched app for months now, last Sunday for the first time the LL-App stopped receiving alarms, thus no more values in xDrip. The sensor starts with 3M.... I talked to Abott-support and they will send me a new sensor, it may just be a defect sensor. The hotline urged me to install a newer version of the app though. Of course I did not tell that I use a patched app. He said, that the newer versions have a better algorithm making them more correct about the values shown. I suppose, the data being sent to xDrip is raw data anyway? Still, it seems it would be good to have newer versions patched once in a while, if possible... However: The data in xDrip may be off a little, still the continuous availability of values on the watch is more helpful and getting better long term sugar results, then a "perfectly calculated result" in the app. |
|
Just a heads up, there's a new Freestyle Libre version coming up: Libre 3. It's very likely that Libre 3 will not be backwards compatible with Libre 2. It'll be necessary to design a new patch once the Android app is out (it's iOS supported only so far). Does anyone know who designed the original patch? It's probably not @TinoKossmann since he forked it from @szpaku80 and added utilities to simplify applying the patch if I see it correctly. So maybe it was them? Libre 3 will now stream directly to the phone, which alleviates some of the reasons for the patch, however, compatibility with xDrip will probably still require a patch. |
If it does realtime data sending to the phone, it's more likely (jopefully) that there "only" has to be an XDrip update. The patched Libre (as I understood) was just to read the sensor. |
|
Since Libre 3 transmits the data every minute to the smartphone and scanning is not necessary any more, in most cases the connection with xdrip seems not necessary any more. (As I understood, the patch is to open the Libre 2 app as a data source for xdrip, while the data goes to the phone every 5 Minutes anyway for the alarms) There are still things Libre 3 does not do (yet):
So I hope there will be a solution with Libre 3, too. Anyway, it is still months until there will even be an Android app. |
|
Any news about a patch for version 2.4 or newer? Or about Libre3? |
|
I'd keep them separate. |
|
Could you create a patch for librelink v.2.5.3? |
As stated several times already, the owner of this repo is not the developer of the patch itself! Also you can just use the libre 2 without the patched app at all: https://www.minimallooper.com/post/how-to-setup-freestyle-libre-2-and-oop2-to-use-a-native-bluetooth-connection-in-xdrip |
Let's hope this will be availible for Libre 3 too |
It will be, patience is key :) |
This is a supercool project!
Would it be possible to patch the new LibreLink version 2.4 accordingly?