fix: Literal blocks in _BOOT_AM335x_AM437x

Address some warnings in _BOOT_AM335x_AM437x by properly indenting sections. Signed-off-by: Randolph Sapp <[email protected]>
TexasInstruments · Dec 6, 2024 · 0d0f08b · 0d0f08b
1 parent e585cd1
commit 0d0f08b
Showing 1 changed file with 11 additions and 11 deletions.
diff --git a/...s/PDK_Platform_Software/Boot_Board_and_EVM_Abstractions/_BOOT_AM335x_AM437x.rst b/...s/PDK_Platform_Software/Boot_Board_and_EVM_Abstractions/_BOOT_AM335x_AM437x.rst
@@ -516,8 +516,8 @@ not requiring any additional headers. Following are steps for boot:
     Please transfer file:
     CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
 
-  4.  As  a next step application binary (without header) can be sent
-via XMODEM which will lead to application start executing.
+#. As a next step application binary (without header) can be sent via XMODEM
+   which will lead to application start executing.
 
 Booting Via McSPI
 """""""""""""""""""
@@ -630,7 +630,7 @@ Booting from NAND involves two steps.
     Enter image file path
 
     Provide the complete path (e.g.
-<PDK_INSTALL_DIR/packages/ti/starterware/binary/bootloader/bin/<am335x/am437x-evm>/<compiler>/bootloader_boot_nand_a8host_<debug/release>_ti.bin)
+    <PDK_INSTALL_DIR/packages/ti/starterware/binary/bootloader/bin/<am335x/am437x-evm>/<compiler>/bootloader_boot_nand_a8host_<debug/release>_ti.bin)
 
 -  Enter offset when prompted as shown below.
 
@@ -648,16 +648,16 @@ Booting from NAND involves two steps.
 
 -  Select ECC for flashing.
 
-::
+   ::
 
-    Choose the ECC scheme from given options
-    Enter 1 ---> BCH 8 bit
-    Enter 2 ---> HAM
-    Enter 3 ---> T0 EXIT
-    Please enter ECC scheme type:
+       Choose the ECC scheme from given options
+       Enter 1 ---> BCH 8 bit
+       Enter 2 ---> HAM
+       Enter 3 ---> T0 EXIT
+       Please enter ECC scheme type:
 
-    Always select BCH8 for bootloader and application as ROM code and
-bootloader uses the BCH8 ECC scheme.
+   Always select BCH8 for bootloader and application as ROM code and
+   bootloader uses the BCH8 ECC scheme.
 
 -  Ensure that flash info displayed by tool matches NAND flash in EVM.
 -  After this tool should first erase the required region in flash and