Skip to content

Old (Build, Notes)

Jump to bottom
T-Birth edited this page Nov 5, 2019 · 1 revision

#1 Old Build

  • OS: Windows 10 x64 2016/2017 Redstone or latest LTSB from Team-OS
  • CPU: AMD Ryzen 5 2400G 4x 3.60GHz So.AM4 BOX
  • Cooler: Noctua NH-L12S Topblow Kühler
  • Mainboard: Asus ROG Strix X470-I Gaming AMD X470 So.AM4 Dual Channel DDR4 Mini-ITX Retail
  • Ram: 32GB (2x 16384MB) G.Skill Trident Z silber/rot DDR4-3600 DIMM CL17-19-19-39 Dual Kit (F4-3600C17D-32GTZ)
  • SSD: 500GB 970 Samsung Evo Nvme
  • Power Supply: SilverStone SFX Series ST30SF [Rev. 1.0] 300W SFX12V (SST-ST30SF)
  • Case: SilverStone SST-SG13B-Q - Sugo Mini-ITX
  • HDMI-Dummy Plug : 4K Display Emulator Plug Headless Ghost Emulator Fake Display
  • Bios Tweaks: Load optimized defaults. Save and reboot into Bios. Devices > Disable serial port entirely, Disable the network adapter you're not using, Disable Legacy USB. Disable XHCI handoff. Disable HPET. Disable CSM. Disable EHCI handoff. You may want to enable "above 4g limit".
  • Software purchased: SoftPerfect RAM Disk, Shutter, SSD Tweaker Pro, Primocache Desktop, Geek Uninstaller Pro
  • Software for later purchases: Ccleaner and SSD Fresh for Win, Pathfinder for Mac

#2 Additional

  • SFX to ATX Case Adapter for my old Build: SilverStone SST-PP08 - Netzteiladapterblende SFX auf ATX
  • Case Cooler: Noctua NF-A12x25 PWM leiser 120mm Premium-Lüfter
  • APC Surge Protector
  • Cable Clips

#3 Info for me about encountered Error's or other Stuff

  • Ram -> 3600 Tweaked via Ryzen DRAM Calculator (Not Stable atm, try later with higher Agesa/Bios Update)
  • Ram -> 100% Working with The Stilt Preset 3200 Fast
  • Case -> Soon replaced with Dan A4-SFX rev.?
  • Fix -> AnyDesk not starting from Ramdisk -> (Den Service/Dienst von Anydesk) zu Verzögerten start (Automatisch) ändern
  • Fix -> Do not use the Portable version of Shutter or Pulover's Macro Creator
  • Fix -> Only use WHQL Driver from AMD (other Driver cause problems during installation / during installation choose "Local"
  • Fix -> Install ProWinx64 Intel Driver for all Options. (Use standard Settings / Just disable IPv6 Stuff)
  • Fix -> Don't give uninstalltoolexec.exe (Geek Uninstaller Pro) admin rights to prevent errors during Track and Trace installation of other Applications
  • Note -> Sereby was saved under Runtimes with Geek Uninstaller Pro
  • Note -> Amd Radeon Adrenalin Driver was saved under Amd radeon Setting with Geek Uninstaller Pro
  • Note -> Amd Chipset Driver was saved under Amd Software with Geek Uninstaller Pro
  • Note -> AMD CPU OC und BIOS Tuning Guide für Ryzen 3000 (und älter) by Verangry

(Source) (Source)

#4 Additional

  • Grab latest Windows 10 x64 iso from here -> (Source) (LTSB Version recommended / Updated once or twice per Year -> No Bloatware, just pure Windows) or latest Redstone Slim Build
  • Grab Microsoft Toolkit from here -> (Source) (To re-activate Windows)
  • Setup a Ramdisk -> Bootable Ramdisk Setting (SoftPerfect and move your most used Games/Apps, for me Anydesk and Bluestacks to the Ramdisk via HardLinkShellExtension)
  • Important Folders C:\ProgramData and C:\Users\Boxxed\AppData
  • Ramdisk Folder: AppData\Local, AppData\Roaming, Pixelbot, Program Files, Program Files (x86), ProgramData
  • Enable Rapid Mode and Over Provisioning in Samsung Magican (Rapidmode can't be enabled on Nvme)
  • Let TrueIP save the Log in Dropbox folder
  • Enhance Bluestacks with BlueStacks Tweaker (Source)
  • Disable everything around Windows Update/Windows Defender/Windows Firewall (with O&O Shut Up, Win10Privacy WSUS Offline Update)
  • Uninstall Windows Defender: (Source)
  • Don't add Bluestacks to Radeon Control Center, it causes flickering and stuttering
  • Install Apps via Geek Uninstaller Pro Track and Trace function
  • Set Shutter on "Or"
Clone this wiki locally