Skip to content
This repository has been archived by the owner on Mar 1, 2023. It is now read-only.

Stratio/minuteman

 
 

Repository files navigation

Minuteman

Circle CI velocity codecov.io

A distributed, highly available service discovery & internal load balancer for distributed systems (microservices and containers).

Powers:

Usage

You can use the layer 4 load balancer by specifying a VIP from the Marathon UI. The VIP must be specified in the format IP:port, for example: 10.1.2.3:5000. Alternatively, if you're using something other than Marathon, you can create a label on the port protocol buffer while launching a task on Mesos. This label's key must be in the format VIP_$IDX, where $IDX is replaced by a number, starting from 0. Once you create a task, or a set of tasks with a VIP, they will automatically become available to all nodes in the cluster, including the masters.

Details

When you launch a set of tasks with these labels, we distribute them to all of the nodes in the cluster. All of the nodes in the cluster act as decision makers in the load balancing process. There is a process that runs on all the agents which is consulted by the kernel when packets are recognized with this destination address. This process keeps track of availability and reachability of these tasks to attempt to send requests to the right backends

Recommendations

Caveats

  1. You musn't firewall traffic between the nodes
  2. You musn't change ip_local_port_range
  3. You must run a stock kernel from RHEL 7.2+, or Ubuntu 14.04+ LTS
  4. Requires the following kernel modules: ip_vs, ip_vs_wlc, dummy
modprobe ip_vs_wlc
modprobe dummy
  1. Requires dummy minuteman device
ip link add minuteman type dummy
ip link set minuteman up
  1. Requires iptable rule to masquarade connections to VIPs
RULE="POSTROUTING -m ipvs --ipvs --vdir ORIGINAL --vmethod MASQ -m comment --comment Minuteman-IPVS-IPTables-masquerade-rule -j MASQUERADE"
iptables --wait -t nat -I ${RULE}
  1. To support intra-namespace bridge VIPs, bridge netfilter needs to be disabled
sudo sh -c 'echo 0 > /proc/sys/net/bridge/bridge-nf-call-iptables'
  1. IPVS conntrack needs to be enabled
sudo sysctl net.ipv4.vs.conntrack=1

Persistent Connections

It is recommended when you use our VIPs you keep long-running, persistent connections. The reason behind this is that you can very quickly fill up the TCP socket table if you do not. The default local port range on Linux allows source connections from 32768 to 61000. This allows 28232 connections to be established between a given source IP and a destinaton address, port pair. TCP connections must go through the time wait state prior to being reclaimed. The Linux kernel's default TCP time wait period is 120 seconds. Given this, you would exhaust the connection table by only making 235 new connections / sec.

Healthchecks

We also recommend taking advantage of Mesos healthchecks. Mesos healthchecks are surfaced to the load balancing layer. Marathon only converts command healthchecks to Mesos healthchecks. You can simulate HTTP healthchecks via a command similar to test "$(curl -4 -w '%{http_code}' -s http://localhost:${PORT0}/|cut -f1 -d" ")" == 200. This ensures the HTTP status code returned is 200. It also assumes your application binds to localhost. The ${PORT0} is set as a variable by Marathon. We do not recommend using TCP healthchecks as they can be misleading as to the liveness of a service.

Demo

If you would like to run a demo, you can configure a Marathon app as mentioned above, and use the URI https://s3.amazonaws.com/sargun-mesosphere/linux-amd64, as well as the command chmod 755 linux-amd64 && ./linux-amd64 -listener=:${PORT0} -say-string=version1 to execute it. You can then test it by hitting the application with the command: curl http://10.1.2.3:5000. This app exposes an HTTP API. This HTTP API answers with the PID, hostname, and the 'say-string' that's specified in the app definition. In addition, it exposes a long-running endpoint at http://10.1.2.3:5000/stream, which will continue to stream until the connection is terminated. The code for the application is available here: https://github.com/mesosphere/helloworld.

Exposing it to the outside

Prior to this, you had to run a complex proxy that would reconfigure based on the tasks running on the cluster. Fortunately, you no longer need to do this. Instead, you can have an incredible simple HAProxy configuration like so:

defaults
  log global
  mode  tcp
  contimeout 50000000
  clitimeout 50000000
  srvtimeout 50000000

listen appname 0.0.0.0:80
    mode tcp
    balance roundrobin
    server mybackend 10.1.2.3:5000

A Marathon app definition for this looks like:

{
    "acceptedResourceRoles": [
        "slave_public"
    ],
    "container": {
        "docker": {
            "image": "sargun/haproxy-demo:3",
            "network": "HOST"
        },
        "type": "DOCKER"
    },
    "cpus": 0.5,
    "env": {
        "CONFIGURL": "https://gist.githubusercontent.com/sargun/3037bdf8be077175e22c/raw/be172c88f4270d9dfe409114a3621a28d01294c3/gistfile1.txt"
    },
    "instances": 1,
    "mem": 128,
    "ports": [
        80
    ],
    "requirePorts": true
}

This will run an HAProxy on the public slave, on port 80. If you'd like, you can make the number of instances equal to the number of public agents. Then, you can point your external load balancer at the pool of public agents on port 80. Adapting this would simply involve changing the backend entry, as well as the external port.

Potential Roadblocks

IP Overlay

If the VIP address that's specified is used elsewhere in the network is can prove problematic. Although the VIP is a 3-tuple, it is best to ensure that the IP dedicated to the VIP is only in use by the load balancing software and isn't in use at all in your network. Therefore, you should choose IPs from the RFC1918 range.

Ports

The port 61420 must be open for the load balancer to work correctly. Because the load balancer maintains a partial mesh, it needs to ensure that connectivity between nodes is unhindered.

Implementation

The local process polls the master node roughly every 5 seconds. The master node caches this for 5 seconds as well, bounding the propagation time for an update to roughly 11 seconds. Although this is the case for new VIPs, it is not the case for failed nodes.

Data plane

The load balancer dataplane primarily utilizes IPVS.

Load balancing algorithm

The load balancing algorithm used is IPVS Weighted Least Connection algorithm. Currently all the backends have a weight of 1.

Failure detection

The load balancer includes a state of the art failure detection scheme. This failure detection scheme takes some of the work done in the Hyparview work. The failure detector maintains a fully connected sparse graph of connections amongst the nodes in the cluster.

Every node maintains an adjacency table. These adjacency tables are gossiped to every other node in the cluster. These adjacency tables are then used to build an application-level multicast overlay.

These connections are monitored via an adaptive ping algorithm. The adaptive ping algorithm maintains a window of pings between neighbors, and if the ping times out, they sever the connections. Once this connection is severed the new adjacencies are gossiped to all other nodes, therefore potentially triggering cascading healthchecks. This allows the system to detect failures in less than a second. Although, the system has backpressure when there are lots of failures, and fault detection can rise to 30 seconds.

Evaluation

We evaluated the fault-detection of Minuteman in a real world situation. We created a cluster with 40 physical Minuteman / Lashup nodes, and 1000 tasks in one VIP. The testing node created a new connection for every request, and ran 10 threads, each capped at 10 requests a second.

At 5 seconds into both tests, we failed 12.5% of the machines by artificially introducing a kernel panic. Our purpose of the test was to try to measure the latency deviation, and the time to repair.

Active Failure Detection - Pre-Lashup

Active Failure Detection Pre-Lashup Graph

Passive Failure Detection - Post-Lashup

Post-Lashup Imgur Basho Bench Config

Releases

No releases published

Packages

No packages published

Languages

  • Erlang 94.6%
  • Shell 2.7%
  • Makefile 1.6%
  • HTML 1.1%