Test branch

config/esp32/components/chip/CMakeLists.txt

@@ -143,9 +143,6 @@ endif()
 
 if(CONFIG_ENABLE_ICD_SERVER)
     chip_gn_arg_append("chip_enable_icd_server"               "true")
-    if(CONFIG_ICD_ENFORCE_SIT_SLOW_POLL_LIMIT)
-        chip_gn_arg_append("icd_enforce_sit_slow_poll_limit"               "true")
-    endif()
     if(CONFIG_ICD_REPORT_ON_ACTIVE_MODE)
         chip_gn_arg_append("chip_icd_report_on_active_mode"               "true")
     endif()

config/esp32/components/chip/Kconfig

@@ -32,7 +32,7 @@ menu "CHIP Core"
             default 8
             help
                 The maximum number of simultaneously active CHIP exchange contexts.
-
+                                           
                 An exchange context object is used to track the state of an ongoing CHIP message
                 exchange (conversation) with a peer, e.g. a cloud service, a mobile application, or
                 another device.
@@ -410,13 +410,6 @@ menu "CHIP Device Layer"
             help
                 Enables or Disables ICD server
 
-        config ICD_ENFORCE_SIT_SLOW_POLL_LIMIT
-            bool "Enforce SIT Slow Polling Max value to 15 seconds"
-            depends on ENABLE_ICD_SERVER
-            default n
-            help
-                Set to true to enforce SIT Slow Polling Max value to 15seconds
-
         config ICD_REPORT_ON_ACTIVE_MODE
             bool "Emit a report on entering active mode"
             depends on ENABLE_ICD_SERVER

config/esp32/components/chip/idf_component.yml

@@ -26,6 +26,14 @@ dependencies:
             - if: "idf_version >=5.0"
             - if: "target != esp32h2"
 
+    # This matches the dependency of esp_insights
+    espressif/esp_diag_data_store:
+        version: "1.0.1"
+        require: public
+        rules:
+            - if: "idf_version >=5.0"
+            - if: "target != esp32h2"
+
     espressif/esp_rcp_update:
         version: "1.2.0"
         rules:

config/nrfconnect/chip-module/CMakeLists.txt

@@ -156,7 +156,6 @@ if (CONFIG_CHIP_ENABLE_ICD_SUPPORT)
     matter_add_gn_arg_bool  ("chip_enable_icd_checkin"                   CONFIG_CHIP_ICD_CHECK_IN_SUPPORT)
     matter_add_gn_arg_bool  ("chip_enable_icd_user_active_mode_trigger"  CONFIG_CHIP_ICD_UAT_SUPPORT)
     matter_add_gn_arg_bool  ("chip_enable_icd_dsls"                      CONFIG_CHIP_ICD_DSLS_SUPPORT)
-    matter_add_gn_arg_bool  ("icd_enforce_sit_slow_poll_limit"           TRUE)
 endif()
 
 if (CONFIG_CHIP_FACTORY_DATA OR CONFIG_CHIP_FACTORY_DATA_CUSTOM_BACKEND)

docs/guides/ti/matter-users-guide/enabling_icd_on_ti_devices.md

@@ -24,9 +24,6 @@ Trigger Support, set the following parameter to true:
 chip_enable_icd_lit = true
 ```
 
-TI examples have only been tested with the ICD Server configuration. To enable
-the client configuration, set `chip_enable_icd_client` to true.
-
 Persistent subscriptions allow devices to attempt resuming existing
 subscriptions following a device reset. To enable persistent subscriptions, set
 the following parameter to true:

examples/android/CHIPTool/app/src/main/java/com/google/chip/chiptool/provisioning/DeviceProvisioningFragment.kt

@@ -289,7 +289,7 @@ class DeviceProvisioningFragment : Fragment() {
     override fun onICDRegistrationInfoRequired() {
       Log.d(TAG, "onICDRegistrationInfoRequired")
       deviceController.updateCommissioningICDRegistrationInfo(
-        ICDRegistrationInfo.newBuilder().build()
+        ICDRegistrationInfo.newBuilder().setICDStayActiveDurationMsec(30000L).build()
       )
     }
 

examples/contact-sensor-app/nxp/k32w0/args.gni

@@ -28,7 +28,6 @@ chip_generate_link_map_file = true
 
 chip_enable_icd_server = true
 chip_enable_icd_lit = false
-icd_enforce_sit_slow_poll_limit = true
 chip_persist_subscriptions = true
 chip_subscription_timeout_resumption = true
 

examples/contact-sensor-app/nxp/k32w1/args.gni

@@ -32,7 +32,6 @@ chip_with_lwip = false
 chip_enable_icd_server = true
 chip_enable_icd_lit = false
 chip_enable_icd_dsls = false
-icd_enforce_sit_slow_poll_limit = true
 chip_persist_subscriptions = true
 chip_subscription_timeout_resumption = true
 

examples/contact-sensor-app/nxp/mcxw71/args.gni

@@ -30,7 +30,6 @@ chip_with_lwip = false
 
 chip_enable_icd_server = true
 chip_enable_icd_lit = false
-icd_enforce_sit_slow_poll_limit = true
 chip_persist_subscriptions = true
 chip_subscription_timeout_resumption = true
 

examples/light-switch-app/light-switch-common/light-switch-app.matter

@@ -3222,7 +3222,7 @@ endpoint 2 {
     callback attribute generatedCommandList;
     callback attribute acceptedCommandList;
     callback attribute attributeList;
-    ram      attribute featureMap default = 2;
+    ram      attribute featureMap default = 6;
     ram      attribute clusterRevision default = 2;
   }
 }

examples/light-switch-app/light-switch-common/light-switch-app.zap

@@ -5587,7 +5587,7 @@
               "storageOption": "RAM",
               "singleton": 0,
               "bounded": 0,
-              "defaultValue": "2",
+              "defaultValue": "6",
               "reportable": 1,
               "minInterval": 1,
               "maxInterval": 65534,

examples/lit-icd-app/silabs/build_for_wifi_args.gni

@@ -29,7 +29,6 @@ sl_enable_test_event_trigger = true
 chip_enable_icd_server = true
 chip_subscription_timeout_resumption = false
 sl_use_subscription_syncing = true
-icd_enforce_sit_slow_poll_limit = true
 chip_enable_icd_lit = true
 
 # ICD Matter Configuration flags

examples/lit-icd-app/silabs/openthread.gni

@@ -32,7 +32,6 @@ sl_enable_test_event_trigger = true
 chip_enable_icd_server = true
 chip_subscription_timeout_resumption = false
 sl_use_subscription_syncing = true
-icd_enforce_sit_slow_poll_limit = true
 chip_icd_report_on_active_mode = true
 chip_enable_icd_lit = true
 

examples/lock-app/nxp/k32w1/args.gni

@@ -30,7 +30,6 @@ chip_with_lwip = false
 
 chip_enable_icd_server = true
 chip_enable_icd_lit = false
-icd_enforce_sit_slow_poll_limit = true
 chip_persist_subscriptions = true
 chip_subscription_timeout_resumption = true
 

examples/lock-app/nxp/mcxw71/args.gni

@@ -30,7 +30,6 @@ chip_with_lwip = false
 
 chip_enable_icd_server = true
 chip_enable_icd_lit = false
-icd_enforce_sit_slow_poll_limit = true
 chip_persist_subscriptions = true
 chip_subscription_timeout_resumption = true
 

examples/platform/silabs/Si70xxSensor.cpp

@@ -0,0 +1,67 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#include "sl_board_control.h"
+#include "sl_i2cspm_instances.h"
+#include "sl_si70xx.h"
+#include <Si70xxSensor.h>
+#include <lib/support/CodeUtils.h>
+
+namespace {
+
+constexpr uint16_t kSensorTemperatureOffset = 475;
+bool initialized                            = false;
+
+} // namespace
+
+namespace Si70xxSensor {
+
+sl_status_t Init()
+{
+    sl_status_t status = SL_STATUS_OK;
+
+    status = sl_board_enable_sensor(SL_BOARD_SENSOR_RHT);
+    VerifyOrReturnError(status == SL_STATUS_OK, status);
+
+    status = sl_si70xx_init(sl_i2cspm_sensor, SI7021_ADDR);
+    VerifyOrReturnError(status == SL_STATUS_OK, status);
+
+    initialized = true;
+    return status;
+}
+
+sl_status_t GetSensorData(uint16_t & relativeHumidity, int16_t & temperature)
+{
+    VerifyOrReturnError(initialized, SL_STATUS_NOT_INITIALIZED);
+
+    sl_status_t status      = SL_STATUS_OK;
+    int32_t tempTemperature = 0;
+    uint32_t tempHumidity   = 0;
+
+    status = sl_si70xx_measure_rh_and_temp(sl_i2cspm_sensor, SI7021_ADDR, &tempHumidity, &tempTemperature);
+    VerifyOrReturnError(status == SL_STATUS_OK, status);
+
+    // Sensor precision is milliX. We need to reduce to change the precision to centiX to fit with the cluster attributes presicion.
+    temperature      = static_cast<int16_t>(tempTemperature / 10) - kSensorTemperatureOffset;
+    relativeHumidity = static_cast<uint16_t>(tempHumidity / 10);
+
+    return status;
+}
+
+}; // namespace Si70xxSensor

examples/platform/silabs/Si70xxSensor.h

@@ -0,0 +1,48 @@
+/*
+ *
+ *    Copyright (c) 2020 Project CHIP Authors
+ *    Copyright (c) 2019 Google LLC.
+ *    All rights reserved.
+ *
+ *    Licensed under the Apache License, Version 2.0 (the "License");
+ *    you may not use this file except in compliance with the License.
+ *    You may obtain a copy of the License at
+ *
+ *        http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *    Unless required by applicable law or agreed to in writing, software
+ *    distributed under the License is distributed on an "AS IS" BASIS,
+ *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *    See the License for the specific language governing permissions and
+ *    limitations under the License.
+ */
+
+#pragma once
+
+#include "sl_status.h"
+#include <stdint.h>
+
+namespace Si70xxSensor {
+
+/**
+ * @brief Initialises the Si70xx Sensor.
+ *
+ * @return sl_status_t SL_STATUS_OK if there were no errors occured during initialisation.
+ *                     Error if an underlying platform error occured
+ */
+sl_status_t Init();
+
+/**
+ * @brief Reads Humidity and temperature values from the Si70xx sensor.
+ *        The init function must be called before calling the GetSensorData.
+ *
+ * @param[out] relativeHumidity Relative humidity percentage in centi-pourcentage (1000 == 10.00%)
+ * @param[out] temperature Ambiant temperature in centi-celsium (1000 == 10.00C)
+ *
+ * @return sl_status_t SL_STATUS_OK if there were no errors occured during initialisation.
+ *                     SL_STATUS_NOT_INITIALIZED if the sensor was not initialised
+ *                     Error if an underlying platform error occured
+ */
+sl_status_t GetSensorData(uint16_t & relativeHumidity, int16_t & temperature);
+
+}; // namespace Si70xxSensor

examples/platform/silabs/SiWx917/BUILD.gn

@@ -252,6 +252,13 @@ source_set("siwx917-common") {
     public_deps += [ ":test-event-trigger" ]
   }
 
+  if (sl_enable_si70xx_sensor) {
+    sources += [
+      "${silabs_common_plat_dir}/Si70xxSensor.cpp",
+      "${silabs_common_plat_dir}/Si70xxSensor.h",
+    ]
+  }
+
   if (app_data_model != "") {
     public_deps += [ app_data_model ]
   }

examples/platform/silabs/display/demo-ui.c

@@ -167,6 +167,5 @@ void demoUIClearMainScreen(uint8_t * name)
 {
     GLIB_clear(&glibContext);
     demoUIDisplayHeader((char *) name);
-    demoUIDisplayApp(false);
     demoUIDisplayProtocols();
 }

examples/platform/silabs/display/lcd.h

@@ -65,6 +65,7 @@ class SilabsLCD
     int DrawPixel(void * pContext, int32_t x, int32_t y);
     int Update(void);
     void WriteDemoUI(bool state);
+    void WriteDemoUI();
     void SetCustomUI(customUICB cb);
 
     void GetScreen(Screen_e & screen);
@@ -85,8 +86,6 @@ class SilabsLCD
         bool protocol1 = false; /* data */
     } DemoState_t;
 
-    void WriteDemoUI();
-
 #ifdef QR_CODE_ENABLED
     void WriteQRCode();
     void LCDFillRect(uint8_t x, uint8_t y, uint8_t w, uint8_t h);