Skip to content

[SL-UP] Fix for access point power cycle rejoin issue with ecosystem #229

[SL-UP] Fix for access point power cycle rejoin issue with ecosystem

[SL-UP] Fix for access point power cycle rejoin issue with ecosystem #229

# Copyright (c) 2020 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
name: Build example - EFR32
on:
push:
branches:
- master
- 'v*-branch'
pull_request:
merge_group:
concurrency:
group: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
cancel-in-progress: true
env:
CHIP_NO_LOG_TIMESTAMPS: true
jobs:
efr32:
name: EFR32
env:
SILABS_BOARD: BRD4187C
BUILD_TYPE: gn_efr32
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: ghcr.io/project-chip/chip-build-efr32:89
volumes:
- "/tmp/bloat_reports:/tmp/bloat_reports"
steps:
- name: Checkout
uses: actions/checkout@v4
- name: Checkout submodules & Bootstrap
uses: ./.github/actions/checkout-submodules-and-bootstrap
with:
platform: silabs_docker
- name: Set up environment for size reports
uses: ./.github/actions/setup-size-reports
if: ${{ !env.ACT }}
with:
gh-context: ${{ toJson(github) }}
- name: Test SLC gen
timeout-minutes: 30
run: |
scripts/examples/gn_silabs_example.sh examples/lighting-app/silabs ./out/light-app BRD4187C --slc_generate --docker
rm -rf ./out/
- name: Build some BRD4187C variants (1)
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--enable-flashbundle \
--target efr32-brd4187c-thermostat-openthread-mtd \
--target efr32-brd4187c-air-quality-sensor-app-openthread-mtd \
--target efr32-brd4187c-switch-shell-use-ot-coap-lib \
--target efr32-brd4187c-unit-test \
build \
--copy-artifacts-to out/artifacts \
"
- name: Clean out build output
run: rm -rf ./out
- name: Build some BRD4187C variants (2)
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--enable-flashbundle \
--target efr32-brd4187c-light-use-ot-lib \
--target efr32-brd4187c-pump \
--target efr32-brd4187c-lock-shell-heap-monitoring \
build \
--copy-artifacts-to out/artifacts \
"
- name: Clean out build output
run: rm -rf ./out
- name: Build BRD4187C variants (3)
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--enable-flashbundle \
--target efr32-brd4187c-window-covering-additional-data-advertising \
--target efr32-brd4187c-light-rpc \
build \
--copy-artifacts-to out/artifacts \
"
- name: Prepare some bloat report from the previous builds
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
efr32 BRD4187C lighting-app \
out/efr32-brd4187c-light-rpc/matter-silabs-lighting-example.out \
/tmp/bloat_reports/
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
efr32 BRD4187C window-app \
out/efr32-brd4187c-window-covering-additional-data-advertising/matter-silabs-window-example.out \
/tmp/bloat_reports/
- name: Clean out build output
run: rm -rf ./out
- name: Build BRD4338A WiFi Soc variants
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--enable-flashbundle \
--target efr32-brd4338a-light-skip-rps-generation \
--target efr32-brd4338a-lock-skip-rps-generation \
build \
--copy-artifacts-to out/artifacts \
"
- name: Prepare bloat report for brd4338a lock app
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
efr32 BRD4338a lock-app \
out/efr32-brd4338a-lock-skip-rps-generation/matter-silabs-lock-example.out \
/tmp/bloat_reports/
- name: Clean out build output
run: rm -rf ./out
- name: Build BRD2605A WiFi Soc variants
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--enable-flashbundle \
--target efr32-brd2605a-light-skip-rps-generation \
--target efr32-brd2605a-lock-skip-rps-generation \
build \
--copy-artifacts-to out/artifacts \
"
- name: Prepare bloat report for brd2605a lock app
run: |
.environment/pigweed-venv/bin/python3 scripts/tools/memory/gh_sizes.py \
efr32 BRD2605a lock-app \
out/efr32-brd2605a-lock-skip-rps-generation/matter-silabs-lock-example.out \
/tmp/bloat_reports/
- name: Clean out build output
run: rm -rf ./out
- name: Build EFR32 with WiFi NCP
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--enable-flashbundle \
--target efr32-brd4187c-lock-wifi-siwx917 \
--target efr32-brd4187c-light-wifi-rs9116 \
--target efr32-brd4187c-lock-wifi-wf200 \
build \
--copy-artifacts-to out/artifacts \
"
- name: Clean out build output
run: rm -rf ./out
- name: Uploading Size Reports
uses: ./.github/actions/upload-size-reports
if: ${{ !env.ACT }}
with:
platform-name: EFR32