Thread Changes Regenerate

matter/efr32/efr32mg24/BRD2601B/autogen/sl_component_catalog.h

@@ -31,15 +31,19 @@
 #define SL_CATALOG_IOSTREAM_PRESENT
 #define SL_CATALOG_MEMORY_MANAGER_PRESENT
 #define SL_CATALOG_MEMORY_PROFILER_API_PRESENT
+#define SL_CATALOG_MPU_PRESENT
 #ifdef CONFIG_USE_EXTERNAL_FLASH
 #define SL_CATALOG_MX25_FLASH_SHUTDOWN_USART_PRESENT
 #endif // CONFIG_USE_EXTERNAL_FLASH
 #define SL_CATALOG_NVM3_PRESENT
+#define SL_CATALOG_OT_GP_INTERFACE_PRESENT
+#define SL_CATALOG_OPENTHREAD_STACK_PRESENT
 #define SL_CATALOG_POWER_MANAGER_PRESENT
 #define SL_CATALOG_PSA_CRYPTO_PRESENT
 #define SL_CATALOG_RAIL_LIB_PRESENT
 #define SL_CATALOG_RAIL_UTIL_PTI_PRESENT
 #define SL_CATALOG_SE_MANAGER_PRESENT
+#define SL_CATALOG_SECURITY_MANAGER_PRESENT
 #define SL_CATALOG_SEGGER_RTT_PRESENT
 #define SL_CATALOG_BTN0_PRESENT
 #define SL_CATALOG_SIMPLE_BUTTON_PRESENT

matter/efr32/efr32mg24/BRD2601B/autogen/sl_event_handler.c

@@ -11,16 +11,20 @@
 #include "pa_conversions_efr32.h"
 #include "sl_rail_util_power_manager_init.h"
 #include "sl_rail_util_pti.h"
+#include "sl_rail_util_rssi.h"
 #include "sl_board_control.h"
 #include "sl_bt_rtos_adaptation.h"
+#include "platform-efr32.h"
 #include "sl_sleeptimer.h"
+#include "sl_mpu.h"
 #include "gpiointerrupt.h"
 #if defined(USE_TEMP_SENSOR)
 #include "sl_i2cspm_instances.h"
 #endif
 #include "sl_iostream_rtt.h"
 #include "sl_mbedtls.h"
 #include "nvm3_default.h"
+#include "sl_ot_rtos_adaptation.h"
 #include "sl_simple_button_instances.h"
 #include "sl_simple_led_instances.h"
 #if defined(CONFIG_ENABLE_UART)
@@ -71,6 +75,7 @@ void sl_service_init(void)
   sl_board_configure_vcom();
   sl_sleeptimer_init();
   sl_hfxo_manager_init();
+  sl_mpu_disable_execute_from_ram();
   sl_mbedtls_init();
   psa_crypto_init();
   sli_aes_seed_mask();
@@ -82,15 +87,18 @@ void sl_stack_init(void)
   sl_rail_util_pa_init();
   sl_rail_util_power_manager_init();
   sl_rail_util_pti_init();
+  sl_rail_util_rssi_init();
   sl_bt_rtos_init();
+  sl_ot_sys_init();
 }
 
 void sl_internal_app_init(void)
 {
+  sl_ot_rtos_stack_init();
+  sl_ot_rtos_app_init();
 }
 
 void sl_iostream_init_instances(void)
 {
   sl_iostream_rtt_init();
 }
-

matter/efr32/efr32mg24/BRD2601B/autogen/sl_ot_custom_cli.c

@@ -0,0 +1,61 @@
+/***************************************************************************//**
+ * @file
+ * @brief Custom CLI support for OpenThread
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2024 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+#include <openthread/cli.h>
+#include <common/code_utils.hpp>
+#include <string.h>
+#include "sl_ot_custom_cli.h"
+
+/*******************************************************************************
+ * Example syntax (.slcc or .slcp) for populating this file:
+ *
+ *   template_contribution:
+ *     - name: sl_ot_cli_command    # Register a command
+ *       value:
+ *         name: status             # Name of command
+ *         handler: status_command  # Function to be called. Must be defined
+ *
+ ******************************************************************************/
+extern otError bleCommand(void *aContext, uint8_t aArgsLength, char *aArgs[]);
+
+otCliCommand sl_ot_custom_commands[] = {
+#ifdef SL_OPENTHREAD_BLE_CLI_ENABLE
+    {"ble", bleCommand},
+#endif
+
+};
+
+// This is needed because `sizeof` is calculated at compile time and can't be calculated outside of this source file.
+const uint8_t sl_ot_custom_commands_count = OT_ARRAY_LENGTH(sl_ot_custom_commands);
+
+void sl_ot_custom_cli_init(void)
+{
+    IgnoreError(otCliSetUserCommands(sl_ot_custom_commands, sl_ot_custom_commands_count, NULL));
+}

matter/efr32/efr32mg24/BRD2601B/autogen/sl_ot_init.c

@@ -0,0 +1,39 @@
+/***************************************************************************//**
+ * @file
+ * @brief OpenThread initialization.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2024 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+#include "sl_ot_init.h"
+
+void sl_ot_init(void)
+{
+  sl_ot_create_instance();
+  sl_ot_sleep_init();
+  sl_ot_cli_init();
+  sl_ot_custom_cli_init();
+}

matter/efr32/efr32mg24/BRD2601B/autogen/sl_ot_init.h

@@ -0,0 +1,41 @@
+/***************************************************************************//**
+ * @file
+ * @brief This generated header includes declaration of all functions required
+ * during initialization that must be defined by the OpenThread application.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2024 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+#ifndef SL_OT_INIT_H
+#define SL_OT_INIT_H
+
+void sl_ot_init(void);
+extern void sl_ot_create_instance(void); 
+extern void sl_ot_sleep_init(void); 
+extern void sl_ot_cli_init(void); 
+extern void sl_ot_custom_cli_init(void); 
+
+#endif // SL_OT_INIT_H

matter/efr32/efr32mg24/BRD2601B/config/sl_gp_interface_config.h

@@ -0,0 +1,44 @@
+/***************************************************************************//**
+ * @file
+ * @brief OpenThread Green Power configuration file.
+ *******************************************************************************
+ * # License
+ * <b>Copyright 2024 Silicon Laboratories Inc. www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Zlib
+ *
+ * The licensor of this software is Silicon Laboratories Inc.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty. In no event will the authors be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ *
+ ******************************************************************************/
+
+//-------- <<< Use Configuration Wizard in Context Menu >>> -----------------
+
+// <e>  Rx Offset time
+// The rx offset time for the bidirectional message.
+//
+#define GP_RX_OFFSET_IN_MICRO_SECONDS  21000
+// </e>
+
+// <e>  TX Timeout
+// Tx timeout after which the gp outgoing packet is invalid.
+//
+#define GP_TX_MAX_TIMEOUT_IN_MICRO_SECONDS  5000000
+// </e>
+// <<< end of configuration section >>>