Update 01-Generate_Firmware.yaml #33
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: 01-Generate Firmware | |
| on: | |
| push: | |
| branches-ignore: | |
| - main | |
| - "tests/**" | |
| pull_request: | |
| branches: | |
| - 'main' | |
| - 'release/**' | |
| workflow_dispatch: | |
| inputs: | |
| branch: | |
| description: 'Branch to test' | |
| type: string | |
| default: 'dev' | |
| ADAPTER_SN_MG12: | |
| description: 'Adapter serial number of MG12' | |
| type: string | |
| default: '440189400' | |
| ADAPTER_SN_MG24: | |
| description: 'Adapter serial number of MG24' | |
| type: string | |
| default: '440133193' | |
| env: | |
| AM_CORRETTO_17: https://corretto.aws/downloads/latest/amazon-corretto-17-x64-linux-jdk.tar.gz | |
| SLC_CLI_URL: https://www.silabs.com/documents/login/software/slc_cli_linux.zip | |
| COMMANDER_URL: https://www.silabs.com/documents/login/software/SimplicityCommander-Linux.zip | |
| GCC_URL: https://developer.arm.com/-/media/Files/downloads/gnu/12.2.rel1/binrel/arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz | |
| SIM_REPO: https://github.com/SiliconLabs/simplicity_sdk.git | |
| GECKO_SDK_REPO: https://github.com/SiliconLabs/gecko_sdk.git | |
| SDK_VER: v4.4.2 | |
| JLINK_SEGGER_URL: https://www.segger.com/downloads/jlink/JLink_Linux_x86_64.tgz | |
| SDK_PATH: /home/sqa/SimplicityStudio/SDKs/gecko_sdk | |
| START_ADDR_FLASH: 0x8000000 | |
| TASK: gen-only | |
| jobs: | |
| job1: | |
| name: Generate Firmware for MG24 with GCC | |
| runs-on: ubuntu-20.04 | |
| permissions: | |
| contents: read | |
| pull-requests: write | |
| env: | |
| BOARD_NAME_MG12: brd4161a | |
| BOARD_NAME_MG24: brd4187c | |
| ADAPTER_SN_MG12: ${{ github.event.inputs.ADAPTER_SN_MG12 }} #440189400 | |
| ADAPTER_SN_MG24: ${{ github.event.inputs.ADAPTER_SN_MG24 }} #440133193 | |
| HOST_IP: 192.168.1.69 | |
| TOOL_DIRS: arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi/bin | |
| COMPILER: GCC | |
| TOOL_CHAINS: GCC | |
| TASK: gen-only | |
| COMPONENT: all | |
| CHIP_MG12: EFR32MG12 | |
| CHIP_MG24: EFR32MG24BXXXF1536 | |
| steps: | |
| - name: Trigger | |
| run: echo "Triggered by ${{github.event_name}} event" | |
| - name: Check Branch Input | |
| run: | | |
| if [ "${{ github.event_name }}" == "workflow_dispatch" ]; then | |
| if [ -z "${{ github.event.inputs.branch }}" ]; then | |
| echo "Branch input is required for manual trigger." | |
| exit 1 | |
| fi | |
| fi | |
| - name: Checkout | |
| uses: actions/[email protected] | |
| with: | |
| ref: "${{ github.event_name == 'workflow_dispatch' && github.event.inputs.branch || github.ref }}" | |
| - name: Log Current Branch and Commit | |
| run: | | |
| echo "Current branch: $(git rev-parse --abbrev-ref HEAD)" | |
| echo "Current commit: $(git rev-parse HEAD)" | |
| - name: Install Simplicity SDK | |
| if: always() | |
| run: | | |
| if [ -d "simplicity_sdk" ]; then | |
| echo "Removing existing simplicity_sdk folder..." | |
| rm -rf simplicity_sdk | |
| fi | |
| git clone $SIM_REPO | |
| cd simplicity_sdk || exit | |
| ls -la | |
| cd .. | |
| ls -la | |
| - name: Install Gecko SDK | |
| if: always() | |
| run: | | |
| if [ -d "gecko_sdk_$SDK_VER" ]; then | |
| echo "Removing existing gecko_sdk_$SDK_VER folder..." | |
| rm -rf gecko_sdk_$SDK_VER | |
| fi | |
| echo "Cloning the repository..." | |
| git clone $GECKO_SDK_REPO gecko_sdk_$SDK_VER | |
| cd gecko_sdk_$SDK_VER || exit | |
| git checkout tags/$SDK_VER | |
| ls -la | |
| mkdir extension | |
| cd extension | |
| git clone https://github.com/SiliconLabs/IEC60730_Libs.git | |
| cd IEC60730_Libs | |
| git checkout create-unit-test-functions-in-lib-iec60730 | |
| ls -la | |
| cd .. | |
| ls -la | |
| cd .. | |
| ls -la | |
| - name: Install Amazon Corretto 17 | |
| if: always() | |
| run: | | |
| wget $AM_CORRETTO_17 | |
| tar -xzf amazon-corretto-17-x64-linux-jdk.tar.gz | |
| ls -la | |
| - name: Install SLC CLI | |
| if: always() | |
| run: | | |
| wget $SLC_CLI_URL | |
| unzip slc_cli_linux.zip | |
| ls -la | |
| - name: Install Simplicity Commander | |
| if: always() | |
| run: | | |
| wget $COMMANDER_URL | |
| unzip SimplicityCommander-Linux.zip | |
| cd SimplicityCommander-Linux | |
| ls -la | |
| cd .. | |
| mkdir commander | |
| tar -xf SimplicityCommander-Linux/Commander_linux_x86_64_*.tar.bz commander | |
| cd commander | |
| ls -la | |
| - name: Install GCC | |
| if: always() | |
| run: | | |
| wget $GCC_URL | |
| tar -xf arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz | |
| ls -la | |
| cd arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi | |
| ls -la | |
| - name: Install Ninja build | |
| run: | | |
| sudo apt update | |
| sudo apt -y install ninja-build | |
| ninja --version | |
| - name: Install python3.11 | |
| if: always() | |
| run: | | |
| sudo apt update | |
| sudo apt upgrade | |
| sudo add-apt-repository ppa:deadsnakes/ppa -y | |
| sudo apt update | |
| sudo apt install python3.11 | |
| python3.11 --version | |
| which python3.11 | |
| cat ~/.bashrc | |
| echo "alias python3=python3.11" >> ~/.bashrc | |
| echo "alias python3=python3.11" >> ~/.bash_profile | |
| cat ~/.bashrc | |
| source ~/.bash_profile | |
| source ~/.bashrc | |
| python3 --version | |
| sudo apt install python3.11-full | |
| sudo apt install python3-pip | |
| - name: Generate image | |
| run: | | |
| export PATH=$PATH:$PWD/commander | |
| export PATH=$PATH:$PWD/slc_cli | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export TOOL_DIRS=$PWD/$TOOL_DIRS | |
| export PATH=$PATH:/usr/bin/ | |
| export SDK_PATH=$PWD/gecko_sdk_$SDK_VER | |
| export PATH=$PATH:$PWD/amazon-corretto-17.0.12.7.1-linux-x64/bin | |
| echo $PATH | |
| echo 2 | sudo update-alternatives --config java || exit 1 | |
| java --version | |
| slc --version | |
| slc configuration --sdk=${SDK_PATH} | |
| ninja --version | |
| slc signature trust --sdk $SDK_PATH | |
| slc configuration -gcc=$TOOL_DIRS | |
| make prepare | |
| cd build || exit 1 | |
| echo "Generate image for MG12" | |
| export ADAPTER_SN_MG12=${{ env.ADAPTER_SN_MG12}} | |
| export BOARD_NAME_MG12=${{ env.BOARD_NAME_MG12 }} | |
| slc signature trust -extpath $SDK_PATH/extension/IEC60730_Libs | |
| cmake --toolchain ../cmake/toolchain.cmake .. -DENABLE_INTEGRATION_TESTING=ON -DBOARD_NAME=$BOARD_NAME_MG12 || exit 1 | |
| cmake --build . --target integration_test_info -j4 || exit 1 | |
| export LST_PATH=$PWD/test/integration_test/build/$BOARD_NAME_MG12/integration_test_iec60730_watchdog/S | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export HOST_IP=$HOST_IP | |
| bash execute_integration_test.sh $BOARD_NAME_MG12 $TASK $COMPONENTS $ADAPTER_SN_MG12 $COMPILER || exit 1 | |
| echo "Generate image for MG24" | |
| export ADAPTER_SN_MG24=${{ env.ADAPTER_SN_MG24}} | |
| export BOARD_NAME_MG24=${{ env.BOARD_NAME_MG24 }} | |
| slc signature trust -extpath $SDK_PATH/extension/IEC60730_Libs | |
| cmake --toolchain ../cmake/toolchain.cmake .. -DENABLE_INTEGRATION_TESTING=ON -DBOARD_NAME=$BOARD_NAME_MG24 || exit 1 | |
| cmake --build . --target integration_test_info -j4 || exit 1 | |
| export LST_PATH=$PWD/test/integration_test/build/$BOARD_NAME_MG24/integration_test_iec60730_watchdog/S | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export HOST_IP=$HOST_IP | |
| bash execute_integration_test.sh $BOARD_NAME_MG24 $TASK $COMPONENTS $ADAPTER_SN_MG24 $COMPILER || exit 1 | |
| - name: Upload firmware MG12 | |
| uses: actions/[email protected] | |
| with: | |
| name: firmware_mg12_gcc | |
| path: ${{ github.workspace }}/build/test/integration_test/build/$BOARD_NAME_MG12/integration_test_iec60730_invariable_memory/NS/ | |
| warn: Output a warning but do not fail the action | |
| retention-days: 90 | |
| - name: Upload firmware MG24 | |
| uses: actions/[email protected] | |
| with: | |
| name: firmware_mg24_gcc | |
| path: ${{ github.workspace }}/build/test/integration_test/build/$BOARD_NAME_MG24/integration_test_iec60730_invariable_memory/NS/ | |
| warn: Output a warning but do not fail the action | |
| retention-days: 90 |