Silabs thieu vu patch 1 #19
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: 01-Generate Firmware | |
| on: | |
| push: | |
| branches-ignore: | |
| - main | |
| - "tests/**" | |
| pull_request: | |
| branches: | |
| - 'main' | |
| - 'release/**' | |
| workflow_dispatch: | |
| inputs: | |
| branch: | |
| description: 'Branch to test' | |
| type: string | |
| default: 'dev' | |
| env: | |
| AM_CORRETTO_17: https://corretto.aws/downloads/latest/amazon-corretto-17-x64-linux-jdk.tar.gz | |
| SLC_CLI_URL: https://www.silabs.com/documents/login/software/slc_cli_linux.zip | |
| COMMANDER_URL: https://www.silabs.com/documents/login/software/SimplicityCommander-Linux.zip | |
| GCC_URL: https://developer.arm.com/-/media/Files/downloads/gnu/12.2.rel1/binrel/arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz | |
| SIM_REPO: https://github.com/SiliconLabs/simplicity_sdk.git | |
| GECKO_SDK_REPO: https://github.com/SiliconLabs/gecko_sdk.git | |
| SDK_VER: v4.4.2 | |
| JLINK_SEGGER_URL: https://www.segger.com/downloads/jlink/JLink_Linux_x86_64.tgz | |
| SDK_PATH: /home/sqa/SimplicityStudio/SDKs/gecko_sdk | |
| START_ADDR_FLASH: 0x8000000 | |
| TASK: gen-only | |
| jobs: | |
| job1: | |
| name: Generate Firmware for MG24 with GCC | |
| runs-on: ubuntu-20.04 | |
| permissions: | |
| contents: read | |
| pull-requests: write | |
| env: | |
| BOARD_NAME: brd4187c | |
| HOST_IP: 192.168.1.69 | |
| TOOL_DIRS: arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi/bin | |
| COMPILER: GCC | |
| TOOL_CHAINS: GCC | |
| TASK: gen-only | |
| COMPONENT: all | |
| ADAPTER_SN: 440133193 | |
| CHIP: EFR32MG24BXXXF1536 | |
| steps: | |
| - name: Trigger | |
| run: echo "Triggered by ${{github.event_name}} event" | |
| - name: Check Branch Input | |
| run: | | |
| if [ "${{ github.event_name }}" == "workflow_dispatch" ]; then | |
| if [ -z "${{ github.event.inputs.branch }}" ]; then | |
| echo "Branch input is required for manual trigger." | |
| exit 1 | |
| else | |
| echo "Checkout branch ${{ github.event.inputs.branch }}" | |
| fi | |
| else | |
| # Extract branch name from github.ref | |
| BRANCH_NAME="${{ github.ref }}" | |
| BRANCH_NAME="${BRANCH_NAME##*/}" # This removes everything before the last '/' | |
| echo "Checkout branch $BRANCH_NAME" | |
| fi | |
| - name: Checkout | |
| uses: actions/[email protected] | |
| - name: Install Simplicity SDK | |
| if: always() | |
| run: | | |
| git clone $SIM_REPO | |
| cd simplicity_sdk | |
| ls -la | |
| cd .. | |
| ls -la | |
| - name: Install Gecko SDK | |
| if: always() | |
| run: | | |
| git clone $GECKO_SDK_REPO gecko_sdk_$SDK_VER | |
| cd gecko_sdk_$SDK_VER | |
| git checkout tags/$SDK_VER | |
| ls -la | |
| mkdir extension | |
| cd extension | |
| git clone https://github.com/SiliconLabs/IEC60730_Libs.git | |
| cd IEC60730_Libs | |
| git checkout create-unit-test-functions-in-lib-iec60730 | |
| ls -la | |
| cd .. | |
| ls -la | |
| cd .. | |
| ls -la | |
| - name: Install Amazon Corretto 17 | |
| if: always() | |
| run: | | |
| wget $AM_CORRETTO_17 | |
| tar -xzf amazon-corretto-17-x64-linux-jdk.tar.gz | |
| ls -la | |
| - name: Install SLC CLI | |
| if: always() | |
| run: | | |
| wget $SLC_CLI_URL | |
| unzip slc_cli_linux.zip | |
| ls -la | |
| - name: Install Simplicity Commander | |
| if: always() | |
| run: | | |
| wget $COMMANDER_URL | |
| unzip SimplicityCommander-Linux.zip | |
| cd SimplicityCommander-Linux | |
| ls -la | |
| cd .. | |
| mkdir commander | |
| tar -xf SimplicityCommander-Linux/Commander_linux_x86_64_*.tar.bz commander | |
| cd commander | |
| ls -la | |
| - name: Install GCC | |
| if: always() | |
| run: | | |
| wget $GCC_URL | |
| tar -xf arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz | |
| ls -la | |
| cd arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi | |
| ls -la | |
| - name: Install Ninja build | |
| run: | | |
| sudo apt update | |
| sudo apt -y install ninja-build | |
| ninja --version | |
| - name: Install python3.11 | |
| if: always() | |
| run: | | |
| sudo apt update | |
| sudo apt upgrade | |
| sudo add-apt-repository ppa:deadsnakes/ppa -y | |
| sudo apt update | |
| sudo apt install python3.11 | |
| python3.11 --version | |
| which python3.11 | |
| cat ~/.bashrc | |
| echo "alias python3=python3.11" >> ~/.bashrc | |
| echo "alias python3=python3.11" >> ~/.bash_profile | |
| cat ~/.bashrc | |
| source ~/.bash_profile | |
| source ~/.bashrc | |
| python3 --version | |
| sudo apt install python3.11-full | |
| sudo apt install python3-pip | |
| - name: Generate image | |
| run: | | |
| export PATH=$PATH:$PWD/commander | |
| export PATH=$PATH:$PWD/slc_cli | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export TOOL_DIRS=$PWD/$TOOL_DIRS | |
| export PATH=$PATH:/usr/bin/ | |
| export SDK_PATH=$PWD/gecko_sdk_$SDK_VER | |
| export PATH=$PATH:$PWD/amazon-corretto-17.0.12.7.1-linux-x64/bin | |
| echo $PATH | |
| echo 2 | sudo update-alternatives --config java | |
| java --version | |
| slc --version | |
| slc configuration --sdk=${SDK_PATH} | |
| ninja --version | |
| slc signature trust --sdk $SDK_PATH | |
| slc configuration -gcc=$TOOL_DIRS | |
| make prepare | |
| cd build | |
| slc signature trust -extpath $SDK_PATH/extension/IEC60730_Libs | |
| cmake --toolchain ../cmake/toolchain.cmake .. -DENABLE_INTEGRATION_TESTING=ON -DBOARD_NAME=$BOARD_NAME | |
| cmake --build . --target integration_test_info -j4 | |
| export ADAPTER_SN=440133193 | |
| export LST_PATH=$PWD/test/integration_test/build/brd4187c/integration_test_iec60730_watchdog/S | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export HOST_IP=192.168.1.69 | |
| bash execute_integration_test.sh $BOARD_NAME $TASK $COMPONENTS $ADAPTER_SN $COMPILER | |
| - name: Upload firmware | |
| uses: actions/[email protected] | |
| with: | |
| name: firmware_mg24_gcc | |
| path: ${{ github.workspace }}/build/test/integration_test/build/${{ env.BOARD_NAME }}/integration_test_iec60730_invariable_memory/NS/ | |
| warn: Output a warning but do not fail the action | |
| retention-days: 90 | |
| job2: | |
| name: Generate Firmware for MG12 with GCC | |
| runs-on: ubuntu-20.04 | |
| permissions: | |
| contents: read | |
| pull-requests: write | |
| env: | |
| BOARD_NAME: brd4161a | |
| HOST_IP: 192.168.1.69 | |
| TOOL_DIRS: arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi/bin | |
| COMPILER: GCC | |
| TOOL_CHAINS: GCC | |
| PLATFORM: MG12 | |
| TASK: gen-only | |
| COMPONENT: all | |
| ADAPTER_SN: 440189400 | |
| CHIP: EFR32MG12 | |
| steps: | |
| - name: Trigger | |
| run: echo "Triggered by ${{github.event_name}} event" | |
| - name: Check Branch Input | |
| run: | | |
| if [ "${{ github.event_name }}" == "workflow_dispatch" ]; then | |
| if [ -z "${{ github.event.inputs.branch }}" ]; then | |
| echo "Branch input is required for manual trigger." | |
| exit 1 | |
| else | |
| echo "Checkout branch ${{ github.event.inputs.branch }}" | |
| fi | |
| else | |
| # Extract branch name from github.ref | |
| BRANCH_NAME="${{ github.ref }}" | |
| BRANCH_NAME="${BRANCH_NAME##*/}" # This removes everything before the last '/' | |
| echo "Checkout branch $BRANCH_NAME" | |
| fi | |
| - name: Checkout | |
| uses: actions/[email protected] | |
| - name: Install Simplicity SDK | |
| if: always() | |
| run: | | |
| git clone $SIM_REPO | |
| cd simplicity_sdk | |
| ls -la | |
| cd .. | |
| ls -la | |
| - name: Install Gecko SDK | |
| if: always() | |
| run: | | |
| git clone $GECKO_SDK_REPO gecko_sdk_$SDK_VER | |
| cd gecko_sdk_$SDK_VER | |
| git checkout tags/$SDK_VER | |
| ls -la | |
| mkdir extension | |
| cd extension | |
| git clone https://github.com/SiliconLabs/IEC60730_Libs.git | |
| cd IEC60730_Libs | |
| git checkout create-unit-test-functions-in-lib-iec60730 | |
| ls -la | |
| cd .. | |
| ls -la | |
| cd .. | |
| ls -la | |
| - name: Install Amazon Corretto 17 | |
| if: always() | |
| run: | | |
| wget $AM_CORRETTO_17 | |
| tar -xzf amazon-corretto-17-x64-linux-jdk.tar.gz | |
| ls -la | |
| - name: Install SLC CLI | |
| if: always() | |
| run: | | |
| wget $SLC_CLI_URL | |
| unzip slc_cli_linux.zip | |
| ls -la | |
| - name: Install Simplicity Commander | |
| if: always() | |
| run: | | |
| wget $COMMANDER_URL | |
| unzip SimplicityCommander-Linux.zip | |
| cd SimplicityCommander-Linux | |
| ls -la | |
| cd .. | |
| mkdir commander | |
| tar -xf SimplicityCommander-Linux/Commander_linux_x86_64_*.tar.bz commander | |
| cd commander | |
| ls -la | |
| - name: Install GCC | |
| if: always() | |
| run: | | |
| wget $GCC_URL | |
| tar -xf arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi.tar.xz | |
| ls -la | |
| cd arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-eabi | |
| ls -la | |
| - name: Install Ninja build | |
| run: | | |
| sudo apt update | |
| sudo apt -y install ninja-build | |
| ninja --version | |
| - name: Install python3.11 | |
| if: always() | |
| run: | | |
| sudo apt update | |
| sudo apt upgrade | |
| sudo add-apt-repository ppa:deadsnakes/ppa -y | |
| sudo apt update | |
| sudo apt install python3.11 | |
| python3.11 --version | |
| which python3.11 | |
| cat ~/.bashrc | |
| echo "alias python3=python3.11" >> ~/.bashrc | |
| echo "alias python3=python3.11" >> ~/.bash_profile | |
| cat ~/.bashrc | |
| source ~/.bash_profile | |
| source ~/.bashrc | |
| python3 --version | |
| sudo apt install python3.11-full | |
| sudo apt install python3-pip | |
| - name: Generate image | |
| run: | | |
| export PATH=$PATH:$PWD/commander | |
| export PATH=$PATH:$PWD/slc_cli | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export TOOL_DIRS=$PWD/$TOOL_DIRS | |
| export PATH=$PATH:/usr/bin/ | |
| export SDK_PATH=$PWD/gecko_sdk_$SDK_VER | |
| export PATH=$PATH:$PWD/amazon-corretto-17.0.12.7.1-linux-x64/bin | |
| echo $PATH | |
| echo 2 | sudo update-alternatives --config java | |
| java --version | |
| slc --version | |
| slc configuration --sdk=${SDK_PATH} | |
| ninja --version | |
| slc signature trust --sdk $SDK_PATH | |
| slc configuration -gcc=$TOOL_DIRS | |
| make prepare | |
| cd build | |
| slc signature trust -extpath $SDK_PATH/extension/IEC60730_Libs | |
| cmake --toolchain ../cmake/toolchain.cmake .. -DENABLE_INTEGRATION_TESTING=ON -DBOARD_NAME=$BOARD_NAME | |
| cmake --build . --target integration_test_info -j4 | |
| export ADAPTER_SN=440133193 | |
| export LST_PATH=$PWD/test/integration_test/build/brd4187c/integration_test_iec60730_watchdog/S | |
| export JLINK_PATH=/opt/SEGGER/JLink/libjlinkarm.so | |
| export HOST_IP=192.168.1.69 | |
| bash execute_integration_test.sh $BOARD_NAME $TASK $COMPONENTS $ADAPTER_SN $COMPILER | |
| - name: Upload firmware | |
| uses: actions/[email protected] | |
| with: | |
| name: firmware_mg12_gcc | |
| path: ${{ github.workspace }}/build/test/integration_test/build/${{ env.BOARD_NAME }}/integration_test_iec60730_invariable_memory/NS/ | |
| warn: Output a warning but do not fail the action | |
| retention-days: 90 |