New pictures due to opto input change

Change in the input to the optocoupler. Now using ST1 Data and supply, + 12V, instead of ST1 data and ground.
New pictures + some cosmetic updates.

Seatalk(GPIO).md

@@ -2,17 +2,17 @@
 
 ### 1. Intro
 
-The connection with ”Input type” => ”Seatalk(GPIO)” supports the function to receive, via simple DIY hardware and one of the GPIO:s on the Raspberry, Raymarine Seatalk 1(ST1) data and convert it to SignalK delta. This information can then be forwarded to a NMEA 0183 or NMEA 2000 network with appropriate hardware and plugins. A guide to SeaTalk is found [here](http://boatprojects.blogspot.com/2012/12/beginners-guide-to-raymarines-seatalk.html)
+The connection with ”Input type” => ”Seatalk(GPIO)” supports the function to receive, via simple DIY hardware and one of the GPIO:s on the Raspberry, Raymarine Seatalk 1(ST1) data and convert it to SignalK delta. This information can then be forwarded to a NMEA 0183 or NMEA 2000 network with appropriate hardware and plugins. A guide to SeaTalk is found [here](http://boatprojects.blogspot.com/2012/12/beginners-guide-to-raymarines-seatalk.html).
 
-Original idea is picked from https://github.com/Thomas-GeDaD/Seatalk1-Raspi-reader
+Original idea is picked [from Thomas](https://github.com/Thomas-GeDaD/Seatalk1-Raspi-reader) and a circuit update with ideas [from Marco](https://github.com/marcobergman/seatalk_convert).
 
 ### 2. Hardware
 
-![ST1_opto_SK](https://user-images.githubusercontent.com/16189982/86477381-99920500-bd48-11ea-828d-75459a93d0c5.jpeg)
+![‎ST1_opto](https://github.com/SignalK/signalk-server/assets/16189982/da0ff2fa-7798-40d7-b61f-67634c202ee5)
 
-The circuit is referring to [this optocoupler](https://www.amazon.com/ARCELI-Optocoupler-Isolation-Converter-Photoelectric/dp/B07M78S8LB/ref=sr_1_2?dchild=1&keywords=pc817+optocoupler&qid=1593516071&sr=8-2) but a similar product can of course be used. The LED in the circuit will flicker when there is ST1 traffic. 
+The circuit is referring to [this optocoupler board](https://www.amazon.com/ARCELI-Optocoupler-Isolation-Converter-Photoelectric/dp/B07M78S8LB/ref=sr_1_2?dchild=1&keywords=pc817+optocoupler&qid=1593516071&sr=8-2) but a similar product can of course be used. The LED in the circuit will flicker when there is ST1 traffic. 
 
-Choosing an optocoupler as the hardware interface is a smart way to avoid ground loops and creats electrical isolation from hazardous voltages.
+Choosing an optocoupler as the hardware interface is a smart way to avoid ground loops and creats electrical isolation from hazardous voltages. The setup above will not invert the signal.
 
 Do You want it simple ?  The simplest possible interface solution is according to the picture below. You use a small signal NPN transistor which shifts the DC level, from 12 V DC to 3,3 V DC, and inverts the signal.
 
@@ -23,34 +23,34 @@ Do You want it simple ?  The simplest possible interface solution is according t
 Due the DYI approach and that this function have limited users You have, before configuring the actual connection, to install some software manually in a terminal window.
 Start with an update and then the software install
 
-    $ sudo apt-get update && sudo apt-get install pigpio python-pigpio python3-pigpio
+    sudo apt-get update && sudo apt-get install pigpio python-pigpio python3-pigpio
 
 The connection relies on a [daemon](http://abyz.me.uk/rpi/pigpio/) which is enabled and started via a systemd service. Install with
 
-    $ sudo systemctl enable pigpiod && sudo systemctl restart  pigpiod
+    sudo systemctl enable pigpiod && sudo systemctl restart  pigpiod
 
 Could be checked with 
 
-    $ sudo systemctl status pigpiod
+    sudo systemctl status pigpiod
 
 Please note that pigpio deamon provides, by default, a socket interface on port 8888, which could conflict with other software You have installed. If You want to move the socket interface to another port You have to change the [pigpiod.service file](http://abyz.me.uk/rpi/pigpio/pigpiod.html) with the -p option, and the [Python program](http://abyz.me.uk/rpi/pigpio/python.html#pigpio.pi). So maybe it's easier to move the conflicting program ?
 
-Now go on add a connection, in the admin GUI, with type ”Seatalk(GPIO)” according to the picture. 
+Now go on add a connection for the optocoupler setup, in the admin GUI, with type ”Seatalk(GPIO)” according to the picture.
 
-![ST1_connection_SK](https://user-images.githubusercontent.com/16189982/86477500-d78f2900-bd48-11ea-87f6-875950c462ef.png)
+<img src=https://github.com/SignalK/signalk-server/assets/16189982/51426017-99b5-46b4-8e93-62515a964635 width="35%" height="35%" />
 
-Select which pin, one of the green ones in the picture below, You have shoosen as input and use ”Invert signal” "YES" if You are using the hardware setup above. Invert "NO" is used if You have a different hardware interface which is not inverting the input signal.
+Select which pin, one of the green ones in the picture below. Invert "YES" is used if You have a different hardware interface which is inverting the input signal.
 
 ![GPIO](https://user-images.githubusercontent.com/16189982/86477812-8469a600-bd49-11ea-8e55-4ee4400a2c17.png)
 
 Restart the SignalK server and then use the ”Data Browser” in the admin GUI to confirm that You are receiving the SK data
 
 If You are in doubt, if there is data available at the selected GPIO, You can download a program
 
-    $ wget https://raw.githubusercontent.com/MatsA/seatalk1-to-NMEA0183/master/STALK_read.py
+    wget https://raw.githubusercontent.com/MatsA/seatalk1-to-NMEA0183/master/STALK_read.py
 
 change the setup in the beginning of program and execute it with 
 
-    $ sudo python STALK_read.py
+    sudo python STALK_read.py
 
 If You succed You will se the ST1 sentences roll in.