VaporShell v2.13.1.20201029

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20201029\VaporShell.psd1

VaporShell v2.13.1.20201022

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20201022\VaporShell.psd1

VaporShell v2.13.1.20201015

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20201015\VaporShell.psd1

VaporShell v2.13.1.20201008

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20201008\VaporShell.psd1

VaporShell v2.13.1.20201001

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20201001\VaporShell.psd1

VaporShell v2.13.1.20200924

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20200924\VaporShell.psd1

VaporShell v2.13.1.20200917

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20200917\VaporShell.psd1

VaporShell v2.13.1.20200910

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20200910\VaporShell.psd1

VaporShell v2.13.1.20200903

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20200903\VaporShell.psd1

VaporShell v2.13.1.20200827

Changelog

This is a standard scheduled release to bring this module up to the current CloudFormation specification sheet.

2.13.0 - 2020-07-30

• Issue #81
  • Fixed: Add-ConIf parameter error message.
  • Fixed: Add-ConIf now allows boolean values.
• Issue #82
  • Fixed: Condition Functions are now supported on any parameter that already accepts Intrinsic Functions.
• Miscellaneous
  • Updated PseudoParameter list to current spec.
  • Switched default branch from master to main.

---

Instructions

1. Click here to download the VaporShell.zip file attached to the release.
2. If on Windows: Right-click the downloaded zip, select Properties, then unblock the file.

   This is to prevent having to unblock each file individually after unzipping.

3. Unzip the archive.
4. (Optional) Place the module folder somewhere in your PSModulePath.

   You can view the paths listed by running the environment variable $env:PSModulePath

5. Import the module, using the full path to the PSD1 file in place of VaporShell if the unzipped module folder is not in your PSModulePath:

   # In $env:PSModulePath
   Import-Module VaporShell
   
   # Otherwise, provide the path to the manifest:
   Import-Module -Path C:\MyPSModules\VaporShell\2.13.1.20200827\VaporShell.psd1