MLX90640 library functions for PATHOS based on :/github.com/pimoroni/mlx90640-library
To use the bcm2835 library, install like so:
make bcm2835
Or, step by step:
wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.55.tar.gz
tar xvfz bcm2835-1.55.tar.gz
cd bcm2835-1.55
./configure
make
sudo make install
To install dependencies:
sudo apt-get install libavutil-dev libavcodec-dev libavformat-dev
Then just make and sudo ./blob or sudo ./debugBlob as listed below:
sudo ./debugBlob
This example helps for debugging.
If you would like to see the output image, set "IMAGE_SCALE" to a smaller number.
To change the frame per seconds, set "FPS" to 1,2,4,8, or 16
sudo ./blob
This example