Initial commit

.gitignore

@@ -0,0 +1,36 @@
+# Ignore the following files in GIT #
+######################################
+
+# Python compiled files #
+#########################
+*.pyc
+*.orig
+
+# temporary files for calculation #
+#########################
+
+
+# temporary boundary condition files #
+######################################
+
+
+# Output-Files #
+########################
+/teaser/OutputData/
+
+#Eclipse Settings #
+#####################
+/.settings
+.project
+.pydevproject
+
+#Unit tests #
+#####################
+.cache/
+__pycache__/
+
+#pip install #
+#####################
+*.egg-info/
+*.egg/
+*.eggs

License.txt

@@ -0,0 +1,22 @@
+The MIT License (MIT)
+
+Copyright (c) [2015] [RWTH Aachen University, E.ON Energy Research Center, 
+Institute for Energy Efficienct Buildings and Indoor Climate]
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -0,0 +1,31 @@
+# TEASER4 - Tool for Energy Analysis and Simulation for Efficient Retrofit
+
+The TEASER4 tool allows the creation of archetpye as well as the representation of existing buildings and the calculation of simulation parameters for simulation models. 
+It is being developed at the Institute for Energy Efficient Buildings and Indoor Climate (EBC) at RWTH Aachen University.
+
+This site will be used to further develop the library and make it available under the MIT License.
+
+If you have any questions regarding TEASER4 feel free to contact us at [email protected].
+
+### License
+
+TEASER4 is released by RWTH Aachen University's Institute for Energy Efficient Buildings and Indoor Climate (EBC) under the [MIT License](http://opensource.org/licenses/MIT).
+
+### Acknowledgements
+
+Parts of TEASER4 have been developed within public funded projects and with financial support by BMWi (German Federal Ministry for Economic Affairs and Energy).
+
+### Description
+
+TEASER4 contains an archetype building generator as well as parameter calculation for the Low Order Model of [AixLib](https://github.com/RWTH-EBC/AixLib). TEASER4 will be able to interface arbitrary data sources.
+
+### Version
+
+The current version is 0.1.0. As the idea of TEASER4 came up at the Institute for Energy Efficient Buildings and Indoor Climate (EBC) at RWTH Aachen University in 2012 we leave the number 4 as a reminder.
+
+
+### How to contribute to the development of TEASER
+You are invited to contribute to the development of TEASER. 
+You may report any issues by using the [Issues](https://github.com/RWTH-EBC/TEASER/issues) button.
+Furthermore, you are welcome to contribute via [Pull Requests](https://github.com/RWTH-EBC/TEASER/pulls). The workflow for changes is described in our [Wiki](https://github.com/RWTH-EBC/AixLib/wiki).
+

doc/Makefile

@@ -0,0 +1,192 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = _build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  applehelp  to make an Apple Help Book"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+	@echo "  coverage   to run coverage check of the documentation (if enabled)"
+
+clean:
+	rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/teaser.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/teaser.qhc"
+
+applehelp:
+	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
+	@echo
+	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
+	@echo "N.B. You won't be able to view it unless you put it in" \
+	      "~/Library/Documentation/Help or install it in your application" \
+	      "bundle."
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/teaser"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/teaser"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+coverage:
+	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
+	@echo "Testing of coverage in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/coverage/python.txt."
+
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."

doc/README.md

@@ -0,0 +1,17 @@
+# TEASER - Tool for Energy Analysis and Simulation for Efficient Retrofit
+
+Documentation to follow
+-----
+- UML Diagram of TEASER
+- ...
+
+Acknowlegdements
+-----
+
+The following people from RWTH Aachen University, E.ON Energy Research Center, Institute for Energy Efficient Buildings and Indoor Climate have directly contributed to the implementation of TEASER 4.0.1:
+
+- Moritz Lauster
+- Marcus Fuchs
+- Yasin Görgülü
+- Christoph Gingter
+- Peter Remmen

doc/_build/html/.buildinfo

@@ -0,0 +1,4 @@
+# Sphinx build info version 1
+# This file hashes the configuration used when building these files. When it is not found, a full rebuild will be done.
+config: 3c0e398f145862dbdd9faac663ca9d3e
+tags: 645f666f9bcd5a90fca523b33c5a78b7

doc/_build/html/_sources/index.txt

@@ -0,0 +1,62 @@
+.. teaser documentation master file, created by
+   sphinx-quickstart on Thu Sep 10 10:48:49 2015.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+TEASER4 - Tool for Energy Analysis and Simulation for Efficient Retrofit
+==================================
+
+The TEASER4 tool allows the creation of archetpye buidlings as well as the representation of existing buildings and the calculation 
+of simulation parameters for lumped parameter simulation models. It is being developed at the Institute for Energy Efficient Buildings and
+Indoor Climate (EBC) at RWTH Aachen University.
+
+If you have any questions regarding TEASER4 feel free to contact us at [email protected].
+
+This software is work-in-progress. Documentation will be incomplete or missing and the software may not run properly.
+
+License
+==================
+
+TEASER4 is released by RWTH Aachen University's Institute for Energy Efficient Buildings and Indoor Climate (EBC) under the 
+MIT License(http://opensource.org/licenses/MIT).
+
+Acknowledgements
+==================
+
+Parts of TEASER4 have been developed within public funded projects and with financial support by BMWi (German Federal Ministry for Economic Affairs and Energy).
+
+Description
+==================
+TEASER4 contains an archetype building generator as well as parameter calculation for the Low Order Model of the AixLib (https://github.com/RWTH-EBC/AixLib). TEASER4 is able to interface arbitrary data sources.
+
+Version
+==================
+
+The current version is 0.1.0. As the idea of TEASER came up at the Institute for Energy Efficient Buildings and Indoor Climate (EBC) at RWTH Aachen University in 2012 and this is the fourth "internal" version, we leave the number 4 as a reminder.
+
+
+How to contribute to TEASER
+==================
+
+You are invited to contribute to the development of TEASER. 
+You may report any issues by using the Issues(https://github.com/RWTH-EBC/TEASER/issues) button.
+Furthermore, you are welcome to contribute via Pull Requests(https://github.com/RWTH-EBC/TEASER/pulls). 
+The workflow for changes is described in our Wiki(https://github.com/RWTH-EBC/AixLib/wiki).
+
+
+Contents:
+==================
+
+.. toctree::
+   :maxdepth: 1
+
+   teaser
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+

doc/_build/html/_sources/teaser.Data.DataHelp.txt

@@ -0,0 +1,11 @@
+DataHelp package
+============================
+
+
+OldTeaser module
+-------------------------------------
+
+.. automodule:: teaser.Data.DataHelp.OldTeaser
+    :members:
+    :undoc-members:
+    :show-inheritance: