Project for converting captured Epson ESC/P and ESC/P2 dot matrix and inkjet printer data files to PDF format
Initially this conversion software is taken from the epson convertor which we created for the hardware Retro-Printer Module which captures centronics printer data and converts to e-documents, or prints to modern printers (http://www.retroprinter.com). That project is (c) RWAP Software - www.rwapsoftware.co.uk
This code is provided under the GNU General Public License, as it is felt that it would be of interest and benefit for those wanting to create software for converting Epson (ESC/P and ESC/P2) dot matrix and centronics inkjet printer data files to PDF format.
It is hoped that support for ESC/POS could also be added and this software would then provide a modern replacement for the old epsonps software - http://www.retroarchive.org/garbo/pc/source/epsonps.zip.
At present, the code will take a file called 1.prn in Epson ESC/P or ESC/P2 format and convert it to a PDF
The PrinterConvert code works by creating a bitmap image in memory which is then built up as it interprets the captured printer data. Once the bitmap image for a page is completely rendered, then that is converted to a PDF (ready for printing if you wish). The software also supports the SDL code to output a copy of the page being built to the screen should you want this (look for sdlon in the code).
RWAP Software January 2019
Build Docker image.
sudo docker build -t xxx/escp2pdf .
Use Docker image to start a container.
sudo docker run -itd --name escp2pdf --restart=always -v /home/anuser/escp/:/opt/ xxx/escp2pdf
Call the docker command to start the task.
sudo docker exec -it escp2pdf printerToPDF -o /opt/output -f font2/Epson-Standard.C16 /opt/test.dat
PRE-REQUISITES You will need libpng, ImageMagick, SDL libHARU installed on Linux.
For Debian (on the Raspberry Pi), this means running;
apt-get install libpng ImageMagick
sudo apt-get install libsdl1.2-dev sudo apt-get install libsdl-image1.2-dev
LibHaru has to be downloaded from source and compiled: http://libharu.org/
- detailed installation instructions appear at: https://github.com/libharu/libharu/wiki/Installation
You may also be able to use :
sudo apt install libhpdf-2.2.1 libhpdf-devalthough the latest version is v2.3.0.
Ensure you copy BOTH dir.c and PrinterConvert.c to your working directory
COMPILING
On some versions of Linux, you will need to change the reference in line 8 to read:
#include "/usr/local/include/hpdf.h"
and on line 9 to read:
#include "/usr/local/include/SDL/SDL.h"
To compile the program, simply run make.
INSTALLATION
make install installs the executable to /usr/bin, and the font files to /usr/lib/PrinterToPDF. You can override the destination by passing a value for prefix. For example, to install in /usr/local/bin and /usr/local/lib/PrinterToPDF, type the following:
make prefix=/usr/local install
PrinterToPDF allows various parameters to be passed as part of the command line. These can be passed in any order.
Call it with
printerToPDF -o PATH -f FONT [OPTIONS] [FILE]
Mandatory Options are: -o PATH A directory to store the output files (eg. /home/pi/data/) -f FONT Name of font file to use (eg font2/Epson-Standard.C16)
Options:
-d Set font direction right or left. Default is -d right
-s [NUM] Display printout in sdl window. The optional numeric argument reduces sdl display to that percentage of original size
-p NUM Select predefined page size:
0: A4 portrait (210 x 297 mm) (default)
1: A4 landscape (297 x 210 mm)
2: 12" paper - US Single Sheet (8 x 12")
<b>OR</b>
-p W,H Select custom page size in millimeters (W: width, H: height) - for example, -p 210,297
-m [L],[R],[T],[B] Set page margins in millimeters
You can leave fields blank to keep the default values:
L (left): 3.0 mm (paper size 2: 2.5 mm)
R (right): 3.0 mm (paper size 2: 2.5 mm)
T (top): 8.5 mm (paper size 2: 10.0 mm)
B (bottom): 13.5 mm (paper size 2: 10.0 mm)
<b>OR</b>
-m V,H Set page margins in millimeters - V is vertical sides (left and right), H is horizontal sides (top and bottom)
<b>OR</b>
-m A Set same margins in millimeters for all sides
-l STR Set linefeed ending:
none: No conversion (default)
unix: Unix (LF)
windows: Windows (CR+LF)
mac: MAC (CR)
-8 Use 8 Bit characters (CANNOT be used with -i)
-9 Use 9 Pin printing (ESC/P standard for line feeds)
-i Use character codes 160-255 as italics (CANNOT be used with -8)
-q Quiet mode - do not output any messages
-h Display this help and exit
-v Display version information and exit
[FILE] This is the raw data file to be converted. If not specified, input is read from stdin
The default would be:
printerToPDF -o PATH -f FONT -d right -p 0 -m 3,3,8.5,13.5 -l none
IMPORTANT NOTE The ESC/P standard and ESC/P2 standard are different in how they handle line spacing. The ESC/P standard uses 1/72" units, whereas the later ESC/P2 standard uses 1/60" units.
As a result the line spacing may be incorrect if used with programs which expect a 9 pin (ESC/P) printer.
If the produced output appears elongated (or has apparent extra line feeds), try changing the setting in PrinterConvert.c on line 45 to read:
int needles = 9;
DISCUSSION For general discussion about the PrinterToPDF software and the Retro-Printer project which forms the basis for this conversion software, please visit the forums - https://www.retroprinter-support.com/viewforum.php?f=10