Fix - GFSK & nano crash (#211)

* dev-r3.5_xFSK Bugfix GFSK - Allows other modulations than ASK / OOK and 2-FSK to be received. * fix nano328 send crash - revised PROGVERS - pins excluded to avoid crash - revised comment & changed pins - revised code PullUp loop #211 (comment)
RFD-FHEM · Jun 23, 2021 · 4487c02 · 4487c02
1 parent c6e7fba
commit 4487c02
Show file tree

Hide file tree

Showing 3 changed files with 33 additions and 7 deletions.
diff --git a/src/cc1101.cpp b/src/cc1101.cpp
@@ -5,7 +5,7 @@
 #endif
 
 #define ccMaxBuf 64                  // for cc1101 FIFO, variable is better to revised
-uint8_t cc1101::ccmode = 3;          // MDMCFG2–Modem Configuration Bit 6:4
+uint8_t cc1101::ccmode = 3;          // MDMCFG2–Modem Configuration Bit 6:4 default ASK/OOK
 uint8_t cc1101::revision = 0x01;
 uint8_t ccBuf[ccMaxBuf];             // for cc1101 FIFO, if Circuit board for more cc110x -> ccBuf expand ( ccBuf[radionr][ccMaxBuf] )
 extern volatile bool blinkLED;
@@ -247,7 +247,7 @@ void cc1101::writeCCreg(uint8_t reg, uint8_t var) { // write CC1101 register
 		writeReg(reg - EE_CC1101_CFG, var);
 
 	if (reg - EE_CC1101_CFG == 18) {
-		ccmode = ( var & 0x70 ) >> 4;                // for STM32 - read modulation direct from 0x12 MDMCFG2
+		ccmode = ( var & 0x70 ) >> 4;                // read modulation direct from 0x12 MDMCFG2
 	}
 
     /*
@@ -596,9 +596,9 @@ void cc1101::getRxFifo(uint16_t Boffs) {           // xFSK
 					fifoBytes = ccMaxBuf;
 				}
 				dup = readRXFIFO(fifoBytes);
-				if (cc1101::ccmode != 2 || dup == false) {
+				if (cc1101::ccmode != 2 || dup == false) { // Ralf9: 2 - FIFO ohne dup
 
-					if (cc1101::ccmode != 9) {
+					if (cc1101::ccmode != 9) { // Ralf9: 9 - FIFO mit Debug Ausgaben
 						MSG_PRINT(char(MSG_START));      // SDC_WRITE not work in this scope
 						MSG_PRINT(F("MN;D="));
 					}
@@ -656,7 +656,8 @@ void cc1101::getRxFifo(uint16_t Boffs) {           // xFSK
  * 
  */
 
-			if (marcstate == 17 || cc1101::ccmode == 0) {   // RXoverflow oder LaCrosse?
+      if (marcstate == 17 || cc1101::ccmode != 3) {   // RXoverflow oder nicht ASK/OOK
+//			if (marcstate == 17 || cc1101::ccmode == 0) {   // RXoverflow oder LaCrosse?
 				if (cc1101::flushrx()) {                    // Flush the RX FIFO buffer
 					cc1101::setReceiveMode();
 				}

diff --git a/src/compile_config.h b/src/compile_config.h
@@ -45,7 +45,7 @@
 */
 
 
-#define PROGVERS               "3.5.0-dev+20210420"
+#define PROGVERS               "3.5.0-dev+20210623"
 
 #ifdef OTHER_BOARD_WITH_CC1101
   #define CMP_CC1101

diff --git a/src/signalduino.h b/src/signalduino.h
@@ -96,9 +96,34 @@ void setup() {
     ; // wait for serial port to connect. Needed for native USB
   }
 
-  for (uint8_t i=2;i<13;i++) {
+  // defined states - pullup on for unused pins
+  // start behind RX / TX Pin´s --> all hardware used for system serial 0 & 1
+  // not radino (other boards)  --> end on Pin 23
+  // radino                     --> end on Pin 29 (CCM_radino_CC1101.pdf | sources In-Circuit -> pins_arduino.h)
+  for (uint8_t i=2 ; i<=29;i++) {
+    #ifndef ARDUINO_RADINOCC1101
+      if (i>23) break;
+    #endif
+
+    if (i==LED_BUILTIN) continue;
+    if (i==PIN_LED) continue;
+    if (i==PIN_RECEIVE) continue;
+    if (i==PIN_SEND) continue;
+
+    #ifdef CMP_CC1101 
+      if (i==MOSI || i==MISO || i==SCK || i==SS) continue;
+    #endif
+
+    #if defined(ARDUINO_RADINOCC1101) || defined(ARDUINO_ATMEGA328P_MINICUL)
+      if (i==PIN_MARK433) continue;
+
+      #ifdef ARDUINO_RADINOCC1101
+        if (i==8 || i==LED_BUILTIN_RX || i==LED_BUILTIN_TX) continue;  // special pin ´s --> ...\packages\In-Circuit\hardware\avr\1.0.0\variants\ictmicro --> pins_arduino.h
+      #endif
+    #endif
     pinAsInputPullUp(i);
   }
+
   //delay(2000);
   pinAsInput(PIN_RECEIVE);
   pinAsOutput(PIN_LED);