Releases: QIDITECH/QIDI_Q1_Pro
Q1_Pro_V4.4.24 Version Release
V4.4.24 Update Content
Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
-
Update the QIDI-LINK connection method to make the connection more secure.
-
Added Fluidd account management module
-
Fixed the issue of USB not being read on startup
-
Updated configuration files
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction:
Please download the packaged file Q1_Pro_V4.4.24.zip, after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.
Regarding security software alerts:
The update package might be flagged as risky or potentially malicious by security software on the Windows platform, such as Windows Defender. This is due to components within the package that are intended for compatibility with Qidi Link. If you remain concerned about the potential risk to your PC, please use auto update feature or refer to this topic #1 (comment)
Q1_Pro V4.4.21 Version Release
V4.4.21 Update Content
Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
-
Fixed slow response to filament break detection
-
Fixed issue with configuration file not being backed up during update
-
Adjusted silent print switch position
-
Chamber light setting are no longer affected by the screen off state.
-
Updated configuration file
Enable chamber exhaust fan by default when chamber temp set to 0. Board fan associated with x y motor drive instead of z axis.
Patch 2024/7/3
Fixed the issue where the screen was unresponsive after filament load/unload. For users who have already updated, you can fix this by modifying the gcode_macro.cfg file. Change [gcode_macro M603] and [gcode_macro M604] from:
M118 Filament unloaded
......
M118 Filament loaded
to:
M118 Unload finish
......
M118 Load finish
Then, restart the printer to apply the fix.
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction:
Please download the packaged file Q1_Pro_V4.4.21.zip, after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.
Regarding security software alerts:
The update package might be flagged as risky or potentially malicious by security software on the Windows platform, such as Windows Defender. This is due to components within the package that are intended for compatibility with Qidi Link. If you remain concerned about the potential risk to your PC, please use auto update feature or refer to this topic #1 (comment)
Q1_Pro V4.4.20 Version Release
V4.4.20 Update Content
Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
-
Added emergency stop button and silent mode button on the print page
-
Optimized QR code display logic
QR codes are no longer forced to refresh, but a prompt will appear when they need to be updated.
-
Modified probe point-taking method
The probe point-taking method has been changed from three samples to five, discarding the highest and lowest values.
-
Increased wifi password input length limit to 64 characters
-
Adjusted configuration file
For more details, refer to the notes in the configuration file.
-
Fixed known issues
Fixed issues where the system might start up abnormally under certain conditions. Fixed errors occurring when saving the configuration file.
Patch 2024/6/22
Added German translation for the emergency stop confirmation interface in the UI.
We have discovered an issue that causes a delay in the filament detection response. This will be fixed in the next version.
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction:
Please download the packaged file Q1_Pro_V4.4.20.zip, after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.
Regarding security software alerts:
The update package might be flagged as risky or potentially malicious by security software on the Windows platform, such as Windows Defender. This is due to components within the package that are intended for compatibility with Qidi Link. If you remain concerned about the potential risk to your PC, please use auto update feature or refer to this topic #1 (comment)
Q1_Pro V4.4.19 Version Release
V4.4.19 Update Content
Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
1. Modified platform calibration logic
During platform tilt calibration, the machine performs a sensorless homing downwards to ensure the heights of the left and right Z axes are consistent.
2. Optimized Gcode processing logic
We have increased the processing priority of certain Gcodes, such as SET_GCODE_OFFSET, to ensure they are executed immediately upon input. However, due to the presence of a move queue in the toolhead, which temporarily stores some parsed movements, the effect is not immediate. We plan to continue improving this in future versions.
3. Added functionality to move without homing
We have noticed that in some cases, such as when printing is unexpectedly interrupted, users may want to move the Z-axis to facilitate the removal of a broken model upon machine restart. Typically, this would require homing before movement, but homing can be obstructed by the model. Therefore, we have added the capability to move the Z-axis without homing and provided corresponding prompts.
4. Fixed issues with camera loading under specific circumstances
5. Fixed display issues with connected WiFi name
We also addressed an issue where the display of connected WiFi names containing Unicode characters appeared blank, and this has been fixed.
6. Adjusted default parameters.
Patch Notes for 2024/5/15
Auto-Update Optimization: Now downloads from your selected server.
Configuration Adjustments: Modifications to ·printer.cfg· to address issues with downward homing limits
For users who have already updated and are not experiencing issues, re-update is not necessary. However, if you wish to update, you can do so by downloading the update package and performing an offline update.
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction:
Please download the packaged file Q1_Pro_V4.4.19.zip, after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.
Regarding security software alerts:
The update package might be flagged as risky or potentially malicious by security software on the Windows platform, such as Windows Defender. This is due to components within the package that are intended for compatibility with Qidi Link. If you remain concerned about the potential risk to your PC, please use auto update feature or refer to this topic #1 (comment)
Q1_Pro_V4.4.18 Update Release
Update Content
Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
1. Added port 80 to Fluidd.
2. Fixed the issue where power failure resume could not work.
3. Fixed the issue with USB device unmounting failing in certain cases.
4. Added Ethernet switching feature.
5. Added error prompt for QR code generation.
6. Adjusted default parameters.
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction:
Please download the packaged file Q1_Pro_V4.4.18.zip, after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.
Regarding security software alerts:
The update package might be flagged as risky or potentially malicious by security software on the Windows platform, such as Windows Defender. This is due to components within the package that are intended for compatibility with Qidi Link. If you remain concerned about the potential risk to your PC, please use auto update feature or refer to this topic #1 (comment)
Q1_Pro_V4.4.16 Update Release
Update Content
Important Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
1. Fixed an issue where, under certain conditions, WLAN settings could prevent booting.
2. Parameters in the gcode_macro.cfg file have been modified.
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction: Please download the packaged file Q1_Pro_V4.4.16.rar，after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.
Regarding security software alerts:
The update package might be flagged as risky or potentially malicious by security software on the Windows platform, such as Windows Defender. This is due to components within the package that are intended for compatibility with Qidi Link. If you remain concerned about the potential risk to your PC, consider using an alternative operating system to extract and install the updates. When doing so, it's advisable to utilize the unrar tool for extraction.
Q1_Pro_V4.4.15 Update Release
Update Content
Important Note: After updating, the Klipper configuration file will be replaced. The previous configuration file will be backed up as printer_{datetime}.cfg, printer recalibration will be required.
1. Online Update Feature: Introducing a seamless method for software updates directly through the internet.
2. QIDI Link Service: Support for the new QIDI Link service has been added.
3. Enhanced Cancel Print Logic: Improvement in the logic for canceling printing tasks, making it more intuitive and user-friendly.
4. Power Failure Recovery: Integration of a new feature that allows the printer to recover from sudden power failures and continue printing.
File List
- QD_Q1_SOC
- QD_Q1_UI
Download Instruction: Please download the packaged file Q1_Pro_V4.4.15.rar，after extracting, place the QD_Update folder into the root directory of your USB device. Then, connect the USB device to the printer to proceed with the update.
Additional Information
Warning:
Please refrain from downgrading the firmware. Updating from a higher version to a lower version can lead to various operational issues. Always ensure to update to either the same or a higher version.