1. Overview Top ▲
Using the OutSystems Cloud Connector (outsystemscc) you can connect the apps running in your OutSystems Developer Cloud (ODC) organization to private data and private services ("endpoints") that aren't accessible by the internet. outsystemscc is an open-source project written in Go.
You run outsystemscc on a system in your private network—an on-premise network, a private cloud, or the public cloud—to establish a secure tunnel between your endpoints and the Private Gateway. Your apps can then access the endpoints through the Private Gateway, the server component you activate for each stage of your ODC organization using the ODC Portal. Common use cases include accessing data through a private REST API service and making requests to internal services (SMTP, SMB, NFS,..)
outsystemscc creates a fast TCP/UDP tunnel, with transport over HTTP via WebSockets, secured via SSH using ECDSA with SHA256 keys. The connection is established to either the built-in domain for the stage (for example <organization>.outsystems.app) or a custom domain configured for the stage (for example example.com). In both cases, the connection is over TLS and always encrypted with a valid X.509 certificate.
The following diagram is an example of a ODC customer setup for a Private Gateway active on two stages.
You see how to create a tunnel to the endpoints as in this diagram in the Usage section.
To learn more about the cloud-native architecture of ODC go to the ODC documentation site.
2. Install Top ▲
Minimum system requirement per outsystemscc instance: 2 GB RAM, 2x 1GHz+ CPU.
To install, use either the binary or Docker option. Run the binary on Linux, or use the Docker image on any OS that supports Docker. Running outsystemscc as a Docker image offers several advantages if your system supports it:
- You always run the latest release. You don't need to reinstall each new release.
- You can run
outsystemsccon Windows or any system that supports Docker:- Otherwise, you need to install Windows Subsystem for Linux (WSL) on Windows to use the
outsystemsccLinux binary.
- Otherwise, you need to install Windows Subsystem for Linux (WSL) on Windows to use the
- Without additional configuration
outsystemsccstarts with the Docker daemon on system boot. - For advanced use cases, you can use Kubernetes for orchestration.
After install, ensure you configure the firewall for the private network(s) correctly. For more information, see Firewall setup section.
Download the latest release from the releases page. There are precompiled binaries available for Linux on i386 (32-bit), amd64 (64-bit), and arm64 (64-bit). You can run the binary on any Windows version that supports WSL.
To install, unzip/untar the package and then copy the binary to the desired location. For example:
tar -zxvf outsystemscc_1.0.0_linux_amd64.tar.gz
mv outsystemscc $HOME/.local/bin
outsystemscc --help
You may want to configure the binary to run as a service so it can start on system boot. See the documentation of your Linux distribution for detail on how to do this.
outsystemscc doesn't require root permissions to run.
Run the Docker image directly from the OutSystems GitHub container registry:
docker run --rm -it ghcr.io/outsystems/outsystemscc --help
To enhance the resilience of outsystemscc consider running the Docker container in detached mode and configuring it to restart automatically in case of failures. This can be achieved by adding the -d flag and the --restart=on-failure:<n> option, where <n> is the maximum number of restart attempts. For example:
docker run -d --restart=on-failure:3 ghcr.io/outsystems/outsystemscc:latest --help
The -d flag runs the Docker container in detached mode, setting it to run in the background. The --restart=on-failure option ensures that the container will automatically restart up to <n> times if it exits with a non-zero status. For more information, see the Docker run reference.
If you're running the container on a runtime where you need to specify the command line or override the entrypoint (for example on Azure Container Instances or AWS Fargate):
docker run --rm -it --entrypoint /app/outsystemscc ghcr.io/outsystems/outsystemscc --help
outsystemscc requires only outbound access to the internet in the private network(s) in which it's running.
You can restrict outbound internet connectivity (via a NAT Gateway, for example) by a firewall. For a Layer 7 firewall, you should allow outbound connections to the built-in domain (for example <organization>.outsystems.app) and any custom domains configured for the stage (for example example.com). For a Layer 4 firewall, you must open firewall rules to all CloudFront IP ranges for port 443.
If the network requires outbound traffic to route through a proxy, you specify that using the --proxy option.
💡 There may be a dedicated person or team at your organization responsible for administering network firewalls. If so, you may want to contact them for help with the process.
3. Usage Top ▲
The examples below use the binary command, outsystemscc. If you are using Docker, replace the command with docker run --rm -it ghcr.io/outsystems/outsystemscc:latest or a custom command as outlined in Docker section.
After using outsystemscc to connect one or more endpoints, you have a list of connected endpoint(s) of the form secure-gateway:<port>. You or a member of your team can use these addresses directly in app development in ODC Studio or in developing external libraries using custom code.
ℹ️ cloud-connector supports connecting to endpoints both over TLS/SSL and without TLS/SSL. Currently only certificates signed by a verified Certificate Authority (CA) are supported.
After successfully activating the private gateway for a stage in the ODC Portal, the following screen displays:
ℹ️ Make sure to copy the Token and save it in a safe location. For security reasons, you won't be able to access it again after you close or refresh the page.
Use the Token and Address to form the outsystemscc command to run. For example:
outsystemscc \
--header "token: N2YwMDIxZTEtNGUzNS1jNzgzLTRkYjAtYjE2YzRkZGVmNjcy" \
https://organization.outsystems.app/sg_6c23a5b4-b718-4634-a503-f22aed17d4e7 \
R:8081:192.168.0.3:8393
In this example, you create a tunnel to the endpoint 192.168.0.3:8393, a REST API service running on IP address 192.168.0.3. The endpoint is available to consume by apps running in the connected stage at secure-gateway:8081.
💡 If you want to run
outsystemsccon Azure Container Instances, see the FAQs for specific guidance.
You can create a tunnel to connect multiple endpoints to the same Private Gateway. To do this, run multiple instances of outsystemscc or pass in multiple remotes (R:<local-port>:<remote-host>:<remote-port>) to the same instance. In the latter case, for example:
outsystemscc \
--header "token: N2YwMDIxZTEtNGUzNS1jNzgzLTRkYjAtYjE2YzRkZGVmNjcy" \
https://organization.outsystems.app/sg_6c23a5b4-b718-4634-a503-f22aed17d4e7 \
R:8081:192.168.0.3:8393 R:8082:192.168.0.4:587
In the above example you create a tunnel to connect two endpoints. One, as before, 192.168.0.3:8393, a REST API service running on IP address 192.168.0.3. The endpoint is available for use by apps running in the connected stage at secure-gateway:8081. Second, 192.168.0.4:587, an SMTP server running on 192.168.0.4, another IP in the internal address range. The endpoint is available for use by apps running in the connected stage at secure-gateway:8082.
You can create a tunnel to any endpoint that's in the internal address range and so is network accessible over TCP or UDP from the system on which outsystemscc is run. If the connection is over UDP, add /udp to the end of the remote port.
To learn more about using connected endpoints in app development go to the ODC documentation site. Be sure to share the list of connected endpoint(s) of the form secure-gateway:<port> and any associated swagger specification file(s) with members of your team responsible developing apps in ODC Studio.
You can also use the connected endpoint(s) in custom code development using the External Libraries feature, see the External Libraries SDK documentation for guidance.
By default, outsystemscc logs timestamped information about the connection status and
latency to stdout. For example:
2022/11/10 12:14:42 client: Connecting to ws://organization.outsystems.app/sg_6c23a5b4-b718-4634-a503-f22aed17d4e7:80
2022/11/10 12:14:42 client: Connected (Latency 733.439µs)
You can redirect this output to a file for retention purposes. For example:
outsystemscc \
--header "token: N2YwMDIxZTEtNGUzNS1jNzgzLTRkYjAtYjE2YzRkZGVmNjcy" \
https://organization.outsystems.app/sg_6c23a5b4-b718-4634-a503-f22aed17d4e7 \
R:8081:10.0.0.1:8393 \
>> outsystemscc_log
If your organization uses a centralized log management product, see its documentation about how to redirect the log output.
4. Detailed options Top ▲
Keep remaining options with the default unless your network topology requires you to modify them.
Usage: outsystemscc [options] <server> <remote> [remote] [remote] ...
<server> is the URL to the server. Use the Address displayed on ODC Portal.
<remote>s are remote connections tunneled through the server, each of
which come in the form:
R:<local-port>:<remote-host>:<remote-port>
which does reverse port forwarding, sharing <remote-host>:<remote-port>
from the client to the server's <local-port>.
example remotes
R:8081:192.168.0.3:8393
R:8082:192.168.0.4:587
See https://github.com/OutSystems/cloud-connector for examples in context.
Options:
--keepalive, An optional keepalive interval. Since the underlying
transport is HTTP, in many instances we'll be traversing through
proxies, often these proxies will close idle connections. You must
specify a time with a unit, for example '5s' or '2m'. Defaults
to '25s' (set to 0s to disable).
--max-retry-count, Maximum number of times to retry before exiting.
Defaults to unlimited.
--max-retry-interval, Maximum wait time before retrying after a
disconnection. Defaults to 5 minutes.
--proxy, An optional HTTP CONNECT or SOCKS5 proxy which will be
used to reach the server. Authentication can be specified
inside the URL.
For example, http://admin:[email protected]:8081
or: socks://admin:[email protected]:1080
--header, Set a custom header in the form "HeaderName: HeaderContent".
Use the Token displayed on ODC Portal in using token as HeaderName.
--hostname, Optionally set the 'Host' header (defaults to the host
found in the server url).
--pid Generate pid file in current working directory
-v, Enable verbose logging
--help, This help text
Signals:
The outsystemscc process is listening for:
a SIGUSR2 to print process stats, and
a SIGHUP to short-circuit the client reconnect timer
5. License Top ▲
MIT © OutSystems