MetaCPAN Docker

• Running the MetaCPAN stack with Docker (via Docker Compose)
• Quick Start
• Working with Containers
  • Building Containers
  • Accessing Containers
  • Accessing Services
    • web
    • api
    • github-meets-cpan
    • Elasticsearch
    • grep
• System architecture
  • The bin/metacpan-docker script
    • bin/metacpan init
    • bin/metacpan localapi
    • bin/metacpan-docker pull
    • bin/metacpan-docker reset
    • bin/metacpan-docker build/up/down/start/stop/run/ps/top...
  • Services
    • web
    • api
    • grep
      • Setting up a partial CPAN in the api service
      • Bootstrapping the elasticsearch indices
      • Putting the above all together
    • elasticsearch and elasticsearch_test
• Tips and tricks
  • Running your own miniCPAN inside metacpan-docker
  • Running tests
  • Updating Carton dependencies
  • Updating the git repositories
  • Running Kibana to peek into Elasticsearch data
• Peeking Inside the Container
• To Do
• See also

Running the MetaCPAN stack with Docker (via Docker Compose)

Notice: This project is in experimental stage. It works, but there are a lot of things to be done better. Please use it and create Issues with your problems.

Quick Start

Install Docker and Docker Compose for your platform. Docker for Mac or Docker for Windows will install both tools for you, if you are on either of these environments.

On Linux, Docker's default implementation only allows root user access to Docker commands and to control containers. In order to allow a regular user to access docker follow the post-installation instructions. This document assumes the post-installation steps have been followed for the current user.

It is highly recommended that you alias docker-compose to fig (its original name) and use it wherever docker-compose is used. You are going to have to type this command a lot.

Then, clone this repo and set up the environment:

git clone https://github.com/metacpan/metacpan-docker.git
cd metacpan-docker
bin/metacpan-docker init

The bin/metacpan-docker init command clones the source repositories for:

• metacpan-web
• metacpan-api
• metacpan-grep-front-end
• metacpan-cpan-extracted-lite

These repositories are automatically mounted into the appropriate docker containers allowing the developer to use their preferred tools to work with the source code.

The docker-compose up command on its own will bring up the entire stack in the foreground (logs will be displayed).

The docker-compose up command will also fetch the official container images from MetaCPAN Docker Hub repositories.

This will build the Docker containers for MetaCPAN, PostgreSQL and Elasticsearch services (which will take a while, especially on a fresh first time install of Docker) and run the services.

Don't forget to seed the local metacpan-api with a partial CPAN; run the following command in a separate terminal to get yourself up to speed:

docker-compose exec api index-cpan.sh

This will prompt you to confirm removing old indices and setting up mappings on the Elasticsearch service (say YES). It will then proceed to rsync a partial CPAN in /CPAN for its metadata to be imported.

Once the above is done, you should be able to see your local partial CPAN data in e.g. http://localhost:5001/recent and elsewhere.

Alternatively, if you just want to hack on the web frontend, you can run this instead of all the above:

docker-compose up web

From here, you can proceed and hack on the MetaCPAN code at src/metacpan-api and/or src/metacpan-web directories, and saving edits will reload the corresponding apps automatically!

When done hacking (or, more likely, when you need to rebuild/refresh your Docker environment) you can then run

docker-compose down

in another terminal to stop all MetaCPAN services and remove the containers.

For further details, read on!

Working with Containers

Building Containers

You can (re)build arbitrary containers. For instance, if you want to rebuild the api container:

docker-compose build api

Accessing Containers

Containers are accessible via the docker-compose exec command followed by the container and then the command to execute. For example, to start a shell prompt in the api container:

docker-compose exec api /bin/bash

Executing tests via prove inside the API container:

docker-compose exec api_test prove -lvr \
  t/00_setup.t \
  t/01_darkpan.t \
  t/api/controller/cover.t

To access the psql command line client in the PostgreSQL container:

docker-compose exec pgdb psql

Similarly the mongodb command line client in the MongoDB container is accessed via:

docker-compose exec mongodb mongo --host mongodb test

Accessing Services

Each container is responsible for a different service. Some of these services are available in the developer environment via ports on the host system.

We are using [traefik][13] to manage the traffic between services. The current configuration is:

• api: http://api.metacpan.localhost
• web: http://web.metacpan.localhost
• github-meets-cpan: http://gh.metacpan.localhost
• grep: http://grep.metacpan.localhost

In order to access to the localhost subdomains, you probably have to manually add these entries in you /etc/hosts file.

# add to /etc/hosts
127.0.0.1   api.metacpan.localhost
127.0.0.1   gh.metacpan.localhost
127.0.0.1   grep.metacpan.localhost
127.0.0.1   metacpan.localhost
127.0.0.1   web.metacpan.localhost

You can access the dashboard configuration via: http://metacpan.localhost:8080

web

The local instance of the web front end is accessiable via:

• http://localhost:5001
• http://web.metacpan.localhost

api

• http://localhost:5000
• http://api.metacpan.localhost

github-meets-cpan

• http://localhost:3000
• http://gh.metacpan.localhost

Elasticsearch

The elasticsearch and elasticsearch_test containers are not exposed directly. They are available via the api and api_test containers.

You can query the elasticsearch container via:

docker-compose exec elasticsearch curl http://localhost:9200

You can query the elasticsearch_test container via:

docker-compose exec elasticsearch_test curl http://localhost:9200

PostgreSQL and MongoDB

The PostgreSQL and MongoDB services by default are only accessible from other containers.

grep

The grep metacpan front end is accessible via:

• http://grep.metacpan.localhost

Note: this is using a smaller, frozen version of metacpan-cpan-extracted via metacpan-cpan-extracted-lite.

System architecture

The system consists of several services that live in docker containers:

• web — the web interface on http://localhost:5001
• api — the main server on http://localhost:5000
• api_test — the api server for running tests via prove
• elasticsearch — database for api
• elasticsearch_test — database for api_test
• pgdb - PostgreSQL database container
• logspout - Docker log interface to honeycomb.io
• github-meets-cpan - Containerized version of gh.metacpan.org
• grep - the web interface for grep.metacpan on http://localhost:3001

These services use one or more Docker volumes:

• metacpan_cpan: holds the CPAN archive, mounted in /CPAN
• metacpan_elasticsearch: holds the Elasticsearch database files
• metacpan_elasticsearch_test: holds the Elasticsearch test database files
• metacpan_api_carton and metacpan_web_carton: holds the dependencies installed by Carton for the api and web services, respectively; mounted on /carton instead of local, to prevent clashing with the host user's Carton
• metacpan_git_shared: points to the git repo containing all extracted CPAN versions. This is mounted in /shared/metacpan_git. This can be either metacpan-cpan-extracted or metacpan-cpan-extracted-lite. The volume is bound to the local repo at ${PWD}/src/metacpan-cpan-extracted.

Docker Compose is used to, uh, compose them all together into one system. Using docker-compose directly is a mouthful, however, so putting this all together is done via the bin/metacpan-docker script to simplify setup and usage (and to get you started hacking on the MetaCPAN sooner!)

The bin/metacpan-docker script

bin/metacpan-docker is a thin wrapper around the docker-compose command, providing the environment variables necessary to run a basic MetaCPAN environment. It provides these subcommands:

bin/metacpan init

The init subcommand basically clones the metacpan-api and metacpan-web repositories, and sets up the git commit hooks for each of them, in preparation for future docker-compose or bin/metacpan-docker localapi commands.

It also clones the metacpan-grep-front-end and metacpan-cpan-extracted-lite repositories.

bin/metacpan localapi

The localapi subcommand adds the necessary configuration for docker-compose to run both the metacpan-web and metacpan-api services, along with elasticsearch and Docker volumes. Under the hood, it customizes the COMPOSE_FILE and COMPOSE_PROJECT_NAME environment variables used by docker-compose to use additional YAML configuration files aside from the default docker-compose.yml.

bin/metacpan-docker pull

This is used to update all the git repository in src/*. This will stay on your current local branch.

bin/metacpan-docker reset

This is used to reset all the git repositories in src/* to their latest version on upstream/master. This will fail if you have some uncommited local changes. You should then commit or cancel your changes before re-running the command.

bin/metacpan-docker build/up/down/start/stop/run/ps/top...

As noted earlier, bin/metacpan-docker is a thin wrapper around docker-compose, so commands like up, down, and run will work as expected from docker-compose. See the docker-compose docs for an overview of available commands.

Services

web

The web service is a checkout of metacpan-web, built as a Docker image. Running this service alone is enough if you want to just hack on the frontend, since by default the service is configured to talk to https://fastapi.metacpan.org for its backend; if this is what you want, then you can simply invoke docker-compose up or docker-compose up web.

api

The api service is a checkout of metacpan-api, built as a Docker image, just like the web service.

If using this service to run a local backend, you will need to run some additional commands in a separate terminal once bin/metacpan-docker localapi up runs.

grep

The grep service is a checkout of metacpan-grep-front-end, built as a Docker image. Note that this is using the metacpan_git_shared volume, which requires the git repo for metacpan-cpan-extracted which can be initialized by running:

./bin/metacpan-docker init

Setting up a partial CPAN in the api service

Running

bin/metacpan-docker localapi exec api partial-cpan-mirror.sh

will rsync modules from selected CPAN authors, plus the package and author indices, into the api service's /CPAN directory. This is nearly equivalent to the same script in the (now deprecated) [metacpan-developer][8] repository. [8]: https://github.com/metacpan/metacpan-developer

Bootstrapping the elasticsearch indices

Running

bin/metacpan-docker localapi exec api bin/run bin/metacpan mapping --delete
bin/metacpan-docker localapi exec api bin/run bin/metacpan release /CPAN/authors/id
bin/metacpan-docker localapi exec api bin/run bin/metacpan latest
bin/metacpan-docker localapi exec api bin/run bin/metacpan author

in sequence will create the indices and mappings in the elasticsearch service, and import the /CPAN data into elasticsearch.

Putting the above all together

If you're impatient or too lazy to do all the above, just running

bin/metacpan-docker localapi exec api index-cpan.sh

instead will set it all up for you.

elasticsearch and elasticsearch_test

The elasticsearch and elasticsearch_test services use the official Elasticsearch Docker image, configured with settings and scripts taken from the metacpan-puppet repository. The api service depends on the elasticsearch service and the api_test service depends on the elasticsearch_test services.

Tips and tricks

Running your own miniCPAN inside metacpan-docker

Suppose you have a local minicpan in /home/ftp/pub/CPAN. If you would like to use this in metacpan-docker, then edit the docker-compose.localapi.yml to change the api service's volume mounts to use your local minicpan as /CPAN, e.g.:

services:
  api:
    volumes:
      - /home/ftp/pub/CPAN:/CPAN
      ...

Note that if you want CPAN author data indexed into Elasticsearch, your minicpan should include authors/00whois.xml. Full indexing would take a better part of a day or two, depending on your hardware.

Running tests

Use bin/metacpan-docker run and similar:

# Run tests for metacpan-web against fastapi.metacpan.org
bin/metacpan-docker exec web bin/prove

# Run tests for metacpan-web against a local api
bin/metacpan-docker localapi exec web bin/prove

# Run tests for metacpan-api against a local elasticsearch_test
bin/metacpan-docker localapi exec api bin/prove

Updating Carton dependencies

Because both the api and web services are running inside clean Perl containers, it is possible to maintain a clean set of Carton dependencies independent of your host machine's perl. Just update the cpanfile of the project, and run

bin/metacpan-docker exec web carton install
# or
bin/metacpan-docker exec api carton install

Due to the way the Compose services are configured, these commands will update the corresponding cpanfile.snapshot safely, even if you do or don't have a local directory (internally, the containers' local directory is placed in /carton instead, to prevent interfering with the host user's own local Carton directory.)

Updating the git repositories

You can use bin/metacpan-docker pull to update all src/* directories.

Running Kibana to peek into Elasticsearch data

By default, the docker-compose.localapi.yml configures the elasticsearch service to listen on the Docker host at http://localhost:9200, and is also accessible via the Docker default network address of http://172.17.0.1:9200; you can inspect it via simple curl or wget requests, or use a Kibana container, e.g.

docker run --rm -p 5601:5601 -e ELASTICSEARCH_URL=http://172.17.0.1:9200 -it kibana:4.6

Running the above will provide a Kibana container at http://localhost:5601, which you can configure to have it read the cpan* index in the elasticsearch service.

It is also certainly possible to run Kibana as part of the compose setup, by configuring e.g. a kibana service.

Peeking Inside the Container

If you run docker ps you'll see the containers. You might see something like:

$ docker ps
CONTAINER ID        IMAGE                 COMMAND                  CREATED             STATUS                          PORTS                              NAMES
2efb9c475c83        metacpan-web:latest   "carton exec plackup…"   12 hours ago        Up 12 hours                     0.0.0.0:5001->5001/tcp             metacpan_web_1
8850110e06d8        metacpan-api:latest   "/wait-for-it.sh db:…"   12 hours ago        Up 12 hours                     0.0.0.0:5000->5000/tcp             metacpan_api_1
7686d7ea03c6        postgres:9.6-alpine   "docker-entrypoint.s…"   12 hours ago        Up 12 hours (healthy)           0.0.0.0:5432->5432/tcp             metacpan_pgdb_1
c7de256d29b2        elasticsearch:2.4     "/docker-entrypoint.…"   5 months ago        Up 26 hours                     0.0.0.0:9200->9200/tcp, 9300/tcp   metacpan_elasticsearch_1
f1e04fe53598        elasticsearch:2.4     "/docker-entrypoint.…"   5 months ago        Up 26 hours                     9300/tcp, 0.0.0.0:9900->9200/tcp   metacpan_elasticsearch_test_1

You can then use the container name to get shell access. For instance, to log in to the API container:

docker exec -it metacpan_api_1 /bin/bash

To Do

• Integrate all other MetaCPAN services
• Add more Tips and tricks (as we continue hacking MetaCPAN in Docker)
• Provide a "near-production" Docker Compose configuration, suitable for Docker Swarm, and/or
• Refactor configuration to be suitable for Kubernetes (Google Cloud) deployments

See also

• Docker Compose documentation
• metacpan-developer and metacpan-puppet from which much information about the architecture is based on