[debug] Add command to restart all containers

docs/getting-started/docker/cli.md

@@ -1,6 +1,6 @@
 # Open Voice OS command line
 
-The command line allows you to send a message *(but not only)* directly to the message bus by using the `ovos-cli-client` command from the `ovo_cli` container.
+The command line allows you to send a message _(but not only)_ directly to the message bus by using the `ovos-cli-client` command from the `ovo_cli` container.
 
 !!! warning "Skill interactions"
 
@@ -70,7 +70,7 @@ An easy way to make Open Voice OS speaks is to run the `ovos-speak` command.
 
 ## mana
 
-[Neon Mana](https://github.com/NeonGeckoCom/neon-mana-utils) *(Messagebus Application for Neon AI)* provides tools for interacting with the message bus.
+[Neon Mana](https://github.com/NeonGeckoCom/neon-mana-utils) _(Messagebus Application for Neon AI)_ provides tools for interacting with the message bus.
 
 === "Docker"
 

docs/getting-started/docker/debug.md

@@ -8,6 +8,10 @@ First thing's first, enable the Open Voice OS's debug mode in `~/ovos/config/myc
 
     All containers will have to be restarted to receive the configuration change.
 
+    ```shell
+    docker restart --time 0 $(docker container list --all --filter 'name=ovos' --filter 'name=hivemind' --quiet)
+    ```
+
 ```json title="~/ovos/config/mycroft.conf"
 {
   "debug": true,
@@ -16,11 +20,11 @@ First thing's first, enable the Open Voice OS's debug mode in `~/ovos/config/myc
 ```
 
 !!! note
-    The commands below don't have to be executed in the same order as they are presented, free free to run them in the order you want!
+The commands below don't have to be executed in the same order as they are presented, free free to run them in the order you want!
 
 ## All containers logs
 
-Access all the container logs at the same time, run the following command *(make sure it matches the `docker compose` or `podman-compose` command you run to deploy the stack)*.
+Access all the container logs at the same time, run the following command _(make sure it matches the `docker compose` or `podman-compose` command you run to deploy the stack)_.
 
 === "Docker"
 
@@ -68,7 +72,7 @@ Execute a command inside a container without going into it.
 
 ## Connect inside a container
 
-Go inside a container and run multiple commands *(where `sh` is the available shell in there)*.
+Go inside a container and run multiple commands _(where `sh` is the available shell in there)_.
 
 === "Docker"
 

docs/getting-started/docker/images.md

@@ -18,7 +18,7 @@ Container images could be used for different CPU architectures using the [multi-
 | ---------------------------------------------------------------- | ------------------------------------------------------------------------------ |
 | :material-check-circle-outline:{ style="color: green"} `amd64`   | Such as AMD and Intel processors                                               |
 | :material-check-circle-outline:{ style="color: green"} `aarch64` | Such as Raspberry Pi 64-bit SoC                                                |
-| :material-close-circle-outline:{ style="color: red" } `armv7l`   | Such as Raspberry Pi 32-bit SoC (*not supported because of `onnxruntime`[^1]*) |
+| :material-close-circle-outline:{ style="color: red" } `armv7l`   | Such as Raspberry Pi 32-bit SoC (_not supported because of `onnxruntime`[^1]_) |
 
 ## Containers
 
@@ -57,14 +57,14 @@ Container image tags allows you to deploy a specific version of Open Voice OS, i
 
 To allow data persistence, Docker or Podman volumes are required, they will prevent downloading the requirements everytime the containers are re-created.
 
-| Volume                  | Description                                                                                                                       |
-| ----------------------- | --------------------------------------------------------------------------------------------------------------------------------- |
-| `ovos_gui_file`         | Share QML files from skills between the GUI message bus and the GUI client                                                        |
-| `ovos_listener_records` | [Wake words](../../about/glossary/terms.md#wake-word) and [utterances](../../about/glossary/terms.md#utterance) recorded samples  |
-| `ovos_models`           | Models downloaded by `precise-lite` wake word plugin                                                                              |
-| `ovos_nltk`             | [Punkt](https://www.askpython.com/python-modules/nltk-punkt) Python package required by [NLTK](https://www.nltk.org/index.html)   |
-| `ovos_tts_cache`        | `.wav` and `.pho` files acting as cache from TTS transcription                                                                    |
-| `ovos_vosk`             | Models downloaded by [VOSK](https://alphacephei.com/vosk/) during the initial boot                                                |
+| Volume                  | Description                                                                                                                      |
+| ----------------------- | -------------------------------------------------------------------------------------------------------------------------------- |
+| `ovos_gui_file`         | Share QML files from skills between the GUI message bus and the GUI client                                                       |
+| `ovos_listener_records` | [Wake words](../../about/glossary/terms.md#wake-word) and [utterances](../../about/glossary/terms.md#utterance) recorded samples |
+| `ovos_models`           | Models downloaded by `precise-lite` wake word plugin                                                                             |
+| `ovos_nltk`             | [Punkt](https://www.askpython.com/python-modules/nltk-punkt) Python package required by [NLTK](https://www.nltk.org/index.html)  |
+| `ovos_tts_cache`        | `.wav` and `.pho` files acting as cache from TTS transcription                                                                   |
+| `ovos_vosk`             | Models downloaded by [VOSK](https://alphacephei.com/vosk/) during the initial boot                                               |
 
 `ovos_listener_records` allows you to store samples of wake words and utterances which could help you to build or improve models.
 

docs/getting-started/docker/index.md

@@ -10,14 +10,14 @@ Before going further, here are quick and simple definitions of what a container
 
 > A container is a standard unit of software that packages up code and all its dependencies so the application runs quickly and reliably from one computing environment to another. A container image is a lightweight, standalone, executable package of software that includes everything needed to run an application.
 
-*<div align="right">[Initial source](https://www.docker.com/resources/what-container)</div>*
+_<div align="right">[Initial source](https://www.docker.com/resources/what-container)</div>_
 
 ![type:video](https://www.youtube.com/embed/YFl2mCHdv24?si=z-bWBEPL5SKm2smo)
 
 ## Composer definition
 
 > A composer is a tool for defining and running multi-container container applications. With Compose, you use a YAML file to configure your application’s services. Then, with a single command, you create and start all the services from your configuration.
 
-*<div align="right">[Initial source](https://docs.docker.com/compose)</div>*
+_<div align="right">[Initial source](https://docs.docker.com/compose)</div>_
 
 ![type:video](https://www.youtube.com/embed/Qw9zlE3t8Ko?si=YQOHX_Anq8NmvMZd)

docs/getting-started/docker/installation/basic.md

@@ -10,7 +10,6 @@ This section covers the installation of the [core components](../../../about/glo
 
 Before running the `docker compose` or `podman-compose` commands, please read this [section](../prerequisites/engine.md) first.
 
-
 !!! note "Podman users :muscle:"
 
     If you are running Podman instead of Docker, replace `docker compose` with `podman-compose`.
@@ -39,14 +38,14 @@ Before running the `docker compose` or `podman-compose` commands, please read th
     docker compose --project-name ovos --file docker-compose.windows.yml up --detach
     ```
 
-Depending your Internet speed, your Wi-Fi or Ethernet connection speed and your hardware *([I/O](https://en.wikipedia.org/wiki/Input/output))*, the whole process could take several minutes.
+Depending your Internet speed, your Wi-Fi or Ethernet connection speed and your hardware _([I/O](https://en.wikipedia.org/wiki/Input/output))_, the whole process could take several minutes.
 
 | Hardware                           | Time           |
 | ---------------------------------- | -------------- |
-| Raspberry Pi 3B+ with USB drive    | *~20 minutes*  |
-| Raspberry Pi 4B with USB drive     | *~3 minutes*   |
-| MacBook Air i7 Early 2015 with SSD | *~2.5 minutes* |
-| AMD Ryzen 7 5800 with NVMe drive   | *~45 seconds*  |
+| Raspberry Pi 3B+ with USB drive    | _~20 minutes_  |
+| Raspberry Pi 4B with USB drive     | _~3 minutes_   |
+| MacBook Air i7 Early 2015 with SSD | _~2.5 minutes_ |
+| AMD Ryzen 7 5800 with NVMe drive   | _~45 seconds_  |
 
 !!! danger "Resources overhead"
 

docs/getting-started/docker/installation/configuration.md

@@ -26,7 +26,7 @@ This configuration is very basic, it instructs the Open Voice OS instance to run
 
 By default, the Open Voice OS [services](../../../about/glossary/components.md) will write their logs into a file under `~/.local` directory, these files are not rotated or compressed which could lead to a disk space issue.
 
-The solution is to add these lines into the `~/ovos/config/mycroft.conf` file *(create the file if it does not exist)*, this will tell the services to redirect their logs to the container `stdout`.
+The solution is to add these lines into the `~/ovos/config/mycroft.conf` file _(create the file if it does not exist)_, this will tell the services to redirect their logs to the container `stdout`.
 
 ```json title="~/ovos/config/mycroft.conf"
 {
@@ -49,9 +49,9 @@ The solution is to add these lines into the `~/ovos/config/mycroft.conf` file *(
 
 ## Custom `.asoundrc` for ALSA
 
-Sometime a custom `.asoundrc` file migth be required, a common example is when a voice [HAT](https://www.raspberrypi.com/news/introducing-raspberry-pi-hats/) *(Hardware Attached on Top)* such as [Google AIY Voice Hat](https://aiyprojects.withgoogle.com/voice-v1/) is connected to a Raspberry Pi, a custom `.asoundrc` might be required to make it works with ALSA.
+Sometime a custom `.asoundrc` file migth be required, a common example is when a voice [HAT](https://www.raspberrypi.com/news/introducing-raspberry-pi-hats/) _(Hardware Attached on Top)_ such as [Google AIY Voice Hat](https://aiyprojects.withgoogle.com/voice-v1/) is connected to a Raspberry Pi, a custom `.asoundrc` might be required to make it works with ALSA.
 
-In order to pass this custom `.asoundrc` file to the containers, the file must be created within the `~/ovos/config/` directory and named `asoundrc` *(with no `.`)*.
+In order to pass this custom `.asoundrc` file to the containers, the file must be created within the `~/ovos/config/` directory and named `asoundrc` _(with no `.`)_.
 
 !!! info "Only for the containers using sound"
 

docs/getting-started/docker/installation/skills.md

@@ -22,19 +22,19 @@ ovos-skill-volume==0.0.1 # Specific skill version on PyPi
 git+https://github.com/OpenVoiceOS/skill-ovos-wikipedia.git@fix/whatever # Specific skill's branch on GitHub
 ```
 
-If the `ovos_core` container is wiped for any reasons *(like an update)*, the skill(s) will be automatically reprovisioned.
+If the `ovos_core` container is wiped for any reasons _(like an update)_, the skill(s) will be automatically reprovisioned.
 
 !!! tip "Not only for skills"
 
     `skills.list` file could be used as well to install extra Python librairies, *e.g.*, `SoCo`, `RPi.GPIO`. Just make sure to avoid empty lines.
 
-The main advantage of this method is the simplicity **but** the downside will be more Python dependencies *(libraries)* within the `ovos_core` container, potential conflicts across them, a lack of isolation and a slower start of the container.
+The main advantage of this method is the simplicity **but** the downside will be more Python dependencies _(libraries)_ within the `ovos_core` container, potential conflicts across them, a lack of isolation and a slower start of the container.
 
-## As standalone container *(recommended)*
+## As standalone container _(recommended)_
 
 The second method is to leverage the [ovos-workshop](../../../about/glossary/components.md#ovos-workshop) component by running a skill as standalone, it means the skill will not be part of `ovos_core` container but it will be running inside its own container.
 
-The main advantage is that each skill is isolated which provide more flexibility about Python dependencies *(libraries)*, packages. It is easier to update and more secure **but** the downside will be that more system resources will be consumed and a container image has to be built for each skill.
+The main advantage is that each skill is isolated which provide more flexibility about Python dependencies _(libraries)_, packages. It is easier to update and more secure **but** the downside will be that more system resources will be consumed and a container image has to be built for each skill.
 
 !!! note "Podman users :muscle:"
 
@@ -64,14 +64,14 @@ The main advantage is that each skill is isolated which provide more flexibility
     docker compose --project-name ovos --file docker-compose.windows.yml --file docker-compose.skills.yml up --detach
     ```
 
-Depending your Internet speed, your Wi-Fi or Ethernet connection speed and your hardware *([I/O](https://en.wikipedia.org/wiki/Input/output))*, the whole process could take several minutes.
+Depending your Internet speed, your Wi-Fi or Ethernet connection speed and your hardware _([I/O](https://en.wikipedia.org/wiki/Input/output))_, the whole process could take several minutes.
 
-| Hardware                           | Time           |
-| ---------------------------------- | -------------- |
-| Raspberry Pi 3B+ with USB drive    | *~12 minutes*  |
-| Raspberry Pi 4B with USB drive     | *~48 seconds*  |
-| MacBook Air i7 Early 2015 with SSD | *~50 seconds*  |
-| AMD Ryzen 7 5800 with NVMe drive   | *~15 seconds*  |
+| Hardware                           | Time          |
+| ---------------------------------- | ------------- |
+| Raspberry Pi 3B+ with USB drive    | _~12 minutes_ |
+| Raspberry Pi 4B with USB drive     | _~48 seconds_ |
+| MacBook Air i7 Early 2015 with SSD | _~50 seconds_ |
+| AMD Ryzen 7 5800 with NVMe drive   | _~15 seconds_ |
 
 !!! danger "Resources overhead"
 

docs/getting-started/docker/plugins/microphone.md

@@ -8,7 +8,7 @@ A microhpone plugin allows you to use a specific sound protocol in order to get
 
 The `ovos_listener` container comes with few pre-installed microphone plugins such as:
 
-- `ovos-microphone-plugin-alsa` is using [pyalsaaudio](https://larsimmisch.github.io/pyalsaaudio/) Python library *(default)*
+- `ovos-microphone-plugin-alsa` is using [pyalsaaudio](https://larsimmisch.github.io/pyalsaaudio/) Python library _(default)_
 - `ovos-microphone-plugin-sounddevice` is using [sounddevice](https://python-sounddevice.readthedocs.io/) Python library
 
 If the existing microphone plugins are not enough then you can install yours by following the same principle as for the [STT plugins](./stt.md) by adding a `listener.list` file within the `~/ovos/config/` directory, this file acts as a Python `requirements.txt` file.
@@ -44,7 +44,7 @@ The `ovos_listener` container must be restarted if a change occurs in the `liste
 Here are the two main plugins to use per platform.
 
 | Plugin                               | Platforms                                                                                                                                                                                                               |
-| ------------------------------------ |  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| ------------------------------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | `ovos-microphone-plugin-alsa`        | :fontawesome-brands-linux:{ .lg title="Linux" } :fontawesome-brands-raspberry-pi:{ .lg title="Raspberry Pi" } :fontawesome-brands-apple:{ .lg title="Mac OS" } :fontawesome-brands-windows:{ .lg title="Windows WSL2" } |
 | `ovos-microphone-plugin-sounddevice` | :fontawesome-brands-linux:{ .lg title="Linux" } :fontawesome-brands-raspberry-pi:{ .lg title="Raspberry Pi" } :fontawesome-brands-apple:{ .lg title="Mac OS" } :fontawesome-brands-windows:{ .lg title="Windows WSL2" } |
 

docs/getting-started/docker/prerequisites/cpu.md

@@ -1,6 +1,6 @@
 # CPU instructions
 
-In order to run [TensorFlow](https://en.wikipedia.org/wiki/TensorFlow) used by few Open Voice OS components, the [CPU](https://en.wikipedia.org/wiki/Central_processing_unit) must support `AVX` *(Advanced Vector Extensions)* instruction set for x86 processors or `SIMD` *(Single Instruction, Multiple Data)* instruction set for ARM processors.
+In order to run [TensorFlow](https://en.wikipedia.org/wiki/TensorFlow) used by few Open Voice OS components, the [CPU](https://en.wikipedia.org/wiki/Central_processing_unit) must support `AVX` _(Advanced Vector Extensions)_ instruction set for x86 processors or `SIMD` _(Single Instruction, Multiple Data)_ instruction set for ARM processors.
 
 === "Linux"
 

docs/getting-started/docker/prerequisites/engine.md

@@ -2,9 +2,9 @@
 
 ## Installation
 
-As we are leveraging containers, a container engine such as Docker or Podman is required *(only one of them should be installed)*, as well as their `composer`.
+As we are leveraging containers, a container engine such as Docker or Podman is required _(only one of them should be installed)_, as well as their `composer`.
 
-*If you are not familiar with what a container engine or a `composer` are then please refer to [this section](../index.md) first as these fundamentals must be understood.*
+_If you are not familiar with what a container engine or a `composer` are then please refer to [this section](../index.md) first as these fundamentals must be understood._
 
 ### Versions
 
@@ -32,7 +32,7 @@ To allow a simple user to execute the `docker` command, make sure to add the use
     sudo usermod -a -G docker $USER
     ```
 
-Once added to the `docker` group you will have to logout from the current session *(graphical or [SSH](https://en.wikipedia.org/wiki/Secure_Shell))* in order to get the group added to your user once you reconnect.
+Once added to the `docker` group you will have to logout from the current session _(graphical or [SSH](https://en.wikipedia.org/wiki/Secure_Shell))_ in order to get the group added to your user once you reconnect.
 
 Once reconnected, run the following command to ensure the `docker` has been appened to your `$USER`.
 
@@ -43,7 +43,7 @@ Once reconnected, run the following command to ensure the `docker` has been appe
     uid=1000(foobar) gid=1000(foobar) groups=1000(foobar),973(docker)
     ```
 
-*The `GID` could differ compare to your setup.*
+_The `GID` could differ compare to your setup._
 
 ## Validation