Bugfix renew ca and renew

ChangeLog

@@ -2,6 +2,7 @@ Easy-RSA 3 ChangeLog
 
 3.2.2 (TBD)
 
+   * bugfix: easyrsa-tools.lib: renew, write full metadata to temp-file (b47d2af) (#1267)
    * Introduce new command 'revoke-issued' (38bf2d8) (#1266)
      Commands 'revoke' and 'revoke-issued' are identical.
      Command 'revoke' can ONLY be used in batch mode.

easyrsa3/easyrsa

@@ -40,6 +40,7 @@ A list of commands is shown below:
   build-serverClient-full <file_name_base> [ cmd-opts ]
   inline <file_name_base>
   expire <file_name_base>
+  renew-ca
   renew <file_name_base>
   revoke <file_name_base> [ cmd-opts ] #(DEPRECATED)
   revoke-issued <file_name_base> [ cmd-opts ] #(REPLACEMENT)
@@ -259,6 +260,16 @@ REQUIRED COMMANDS:
       to the 'pki/expired' directory.
 
       Allows an existing request to be signed again."
+	;;
+	renew-ca)
+		text="
+* renew-ca
+
+      Renew CA certificate.
+
+      This will build a new CA certificate and archive the old one.
+      Before changes are made to the current PKI, user confirmation
+      is required."
 	;;
 	renew)
 		text="
@@ -3434,8 +3445,10 @@ Run easyrsa without commands for usage and command help."
 	# Do not over write existing cert
 	if [ -f "$crt_out" ]; then
 		user_error "\
-Existing file must be revoked:
-* $crt_out"
+Cannot expire this certificate, a conflicting file exists:
+* certificate: $crt_out
+
+Use command 'revoke-exired' to revoke this certificate."
 	fi
 
 	# deprecate ALL options

easyrsa3/easyrsa-tools.lib

@@ -772,26 +772,34 @@ Missing request file:
 	crt_out="$out_dir/issued/${file_name_base}.crt"
 
 	# NEVER over-write a renewed cert, revoke it first
-	deny_msg="\
+	if [ -f "$crt_out" ]; then
+		user_error "\
 Cannot renew this certificate, a conflicting file exists:
-*"
-	[ -f "$crt_out" ] && \
-		user_error "$deny_msg certificate: $crt_out"
-	unset -v deny_msg
+* certificate: $crt_out
 
-	# Make inline directory
-	[ -d "$EASYRSA_PKI/inline" ] ||	\
-		mkdir -p "$EASYRSA_PKI/inline" || \
-			die "Failed to create inline directoy."
+Use command 'revoke-renewed' to revoke this certificate."
+	fi
 
 	# Extract certificate usage from old cert
 	ssl_cert_x509v3_eku "$crt_in" cert_type
 
+	# create temp-file for full cert text
+	full_crt_tmp=
+	easyrsa_mktemp full_crt_tmp || \
+		die "easyrsa_mktemp full_crt_tmp"
+
+	# write full cert text tempfile data
+	"$EASYRSA_OPENSSL" x509 -in "$crt_in" \
+		-noout -text > "$full_crt_tmp" || \
+			die "write full cert text"
+
 	# Use SAN from old cert ONLY
-	if grep 'X509v3 Subject Alternative Name' "$crt_in"; then
+	if grep -q 'X509v3 Subject Alternative Name' \
+		"$full_crt_tmp"
+	then
 		EASYRSA_SAN="$(
-			"$EASYRSA_OPENSSL" x509 -in "$crt_in" -noout -text | \
-				grep -A 1 'X509v3 Subject Alternative Name' | \
+			grep -A 1 'X509v3 Subject Alternative Name' \
+				"$full_crt_tmp" | \
 					sed -e s/'^\ *'// \
 						-e /'X509v3 Subject Alternative Name'/d \
 						-e s/'IP Address:'/'IP:'/g
@@ -801,7 +809,7 @@ Cannot renew this certificate, a conflicting file exists:
 		# --san-crit
 		unset -v EASYRSA_SAN_CRIT
 		if grep -q 'X509v3 Subject Alternative Name: critical' \
-			"$crt_in"
+			"$full_crt_tmp"
 		then
 			export EASYRSA_SAN_CRIT='critical,'
 			verbose "renew: --san-crit ENABLED"
@@ -814,28 +822,31 @@ subjectAltName = ${EASYRSA_SAN_CRIT}${EASYRSA_SAN}"
 	fi
 
 	# --bc-crit
-	if grep -q 'X509v3 Basic Constraints: critical' "$crt_in"
+	if grep -q 'X509v3 Basic Constraints: critical' \
+		"$full_crt_tmp"
 	then
 		export EASYRSA_BC_CRIT=1
 		verbose "renew: --bc-crit ENABLED"
 	fi
 
 	# --ku-crit
-	if grep -q 'X509v3 Key Usage: critical' "$crt_in"
+	if grep -q 'X509v3 Key Usage: critical' \
+		"$full_crt_tmp"
 	then
 		export EASYRSA_KU_CRIT=1
 		verbose "renew: --ku-crit ENABLED"
 	fi
 
 	# --eku-crit
-	if grep -q 'X509v3 Extended Key Usage: critical' "$crt_in"
+	if grep -q 'X509v3 Extended Key Usage: critical' \
+		"$full_crt_tmp"
 	then
 		export EASYRSA_EKU_CRIT=1
 		verbose "renew: --eku-crit ENABLED"
 	fi
 
 	# Disable options not supported by renew
-	unset -v EASYRSA_CP_EXTS EASYRSA_AUTO_SAN EASYRSA_NEW_SUBJECT
+	unset -v EASYRSA_AUTO_SAN EASYRSA_NEW_SUBJECT
 
 	# confirm operation by displaying Warning
 	confirm "Continue with 'renew' ? " yes "\