Update index.html

index.html

@@ -451,7 +451,7 @@ <h5 class="modal-title">Help: Hardware </h5>
 					<p>The "A+C Programmer" requires a standard USB cable to connect to your computer. Any USB cable that can pass data will work. Connect the programmer port labeled "PC" to your computer. Then connect the active end of your O.MG Device to one of the programmer ports labeled "O.MG" </p>
 					<p>The PWR, USB, and OMG lights need to be ON to sucessfully flash firmware.</p>
 					<p>The PWR light indicates that you have supplied power to the "PC" connection. If it does not turn on, try using a different USB cable. </p>
-					<p>The USB light indicates that the data lines on PC side are connected to your computer. If it does not turn on, you probably have a "data only" USB cable. Try using a different USB cable.</p>
+					<p>The USB light indicates that the data lines on PC side are connected to your computer. If it does not turn on, you probably have a "charge only" USB cable. Try using a different USB cable.</p>
 					<p>The OMG light indicates that the active end of your OMG device has been properly connected to the programmer. If it does not turn on, you may have accidentally connected the passive end.</p>
 					<p>The ACT light will only turn on when actively flashing the OMG device.</p>
 					<p>If the above does not solve the issue, open a ticket in the #omg-support channel: https://hak5.org/discord</p>