Update index.html

index.html

@@ -197,7 +197,7 @@ <h2 class="accordion-header" id="programmerStep1">
 											</h2>
 											<div id="programmerStep1-collapse" class="accordion-collapse collapse show" aria-labelledby="programmerStep1">
 												<div class="accordion-body">
-													First, connect the O.MG Programmer to your computer. Then plug the <b>active end</b> of the O.MG Device into the programmer. Need help or more details? Click the Help button below.
+													First, connect the O.MG Programmer to your computer. Then connect the <b>active end</b> of the O.MG Device into the programmer. Need help or more details? Click the Help button below.
 												</div>
 												<div class="pb-2 pt-3 justify-content-center text-center">
 													<button type="button" class="btn btn-success btn-lg" id="btnConnectHw">Continue</button>
@@ -284,7 +284,7 @@ <h3 class="display-6" id="success-notification">Firmware Flashed Successfully!</
 
 										<p class="lead text-center" id="success-msg">
 											<p class=""lead">
-												To use the O.MG Device: Plug the active into a USB port. 
+												To use the O.MG Device: Connect the active into a USB port. 
 												Then connect to the WiFi network and browse to http://192.168.4.1/. 
 												<br/>BEFORE USE, FULLY READ THE <a href=" https://github.com/O-MG/O.MG_Cable-Firmware/wiki">USAGE & SAFETY INSTRUCTIONS</a>
 											</p>
@@ -448,9 +448,9 @@ <h5 class="modal-title">Help: Hardware </h5>
 							</div>
 						</div>
 					</div>
-					<p>The "A+C Programmer" requires a standard USB cable to connect to your computer. So use a standard C to A or C to C USB cable. The programmer port labeled "PC" should go to your computer. Then plug the active end of your O.MG Device into one of the programmer ports labeled "O.MG" </p>
+					<p>The "A+C Programmer" requires a standard USB cable to connect to your computer. So use a standard C to A or C to C USB cable. The programmer port labeled "PC" should go to your computer. Then connect the active end of your O.MG Device into one of the programmer ports labeled "O.MG" </p>
 					<p>The "A Programmer" connects directly to your computer via a USB Type A Port. </p>
-					<p>The "A+C Programmer" requires a standard USB cable (USB-A to USB-C, or USB-C to USB-C) to connect to your computer using the port labeled "PC" on your programmer. Then plug the active end of your O.MG Device into one of the programmer ports labeled "O.MG" </p>
+					<p>The "A+C Programmer" requires a standard USB cable (USB-A to USB-C, or USB-C to USB-C) to connect to your computer using the port labeled "PC" on your programmer. Then connect the active end of your O.MG Device into one of the programmer ports labeled "O.MG" </p>
 					<p>Debug LEDS: If using the A+C Programmer, you should see the PWR light turn on when the programmer is connected to your computer. Then the 2nd light (CABLE or O.MG) will turn on when your O.MG Device is properly attached. If the 2nd LED does not turn on when you connect the O.MG device, the O.MG may be inserted backwards or on the wrong port of the programmer. If the PWR light turns off or dims when you connect your O.MG Device, you should immediately unplug the programmer and ask for help from support. </p>
 					<p>If the above does not solve the issue, ask for help on #omg-support: https://hak5.org/discord</p>
 				</div>