Squashed 'resources/hpxml-measures/' changes from fec8230241dd..159cb…

…7bac853

159cb7bac853 Latest results.
df73641ca32c Bugfix.
b575f71ed7e5 Moves duct LtO warning from schematron to ruby measure, so that it can handle cases where the duct location is defaulted too.

git-subtree-dir: resources/hpxml-measures
git-subtree-split: 159cb7bac85399c122abdc69834d567257fabe15

HPXMLtoOpenStudio/measure.rb

@@ -1676,6 +1676,32 @@ def self.add_airflow(runner, model, weather, spaces, airloop_map)
       end
     end
 
+    # Duct leakage to outside warnings?
+    # Need to check here instead of in schematron in case duct locations are defaulted
+    @hpxml.hvac_distributions.each do |hvac_distribution|
+      next unless hvac_distribution.distribution_system_type == HPXML::HVACDistributionTypeAir
+      next if hvac_distribution.duct_leakage_measurements.empty?
+
+      # Skip if there's a duct outside conditioned space
+      next if hvac_distribution.ducts.select { |d| !HPXML::conditioned_locations_this_unit.include?(d.duct_location) }.size > 0
+
+      # Issue warning if duct leakage to outside above a certain threshold and ducts completely in conditioned space
+      issue_warning = false
+      units = hvac_distribution.duct_leakage_measurements[0].duct_leakage_units
+      lto_measurements = hvac_distribution.duct_leakage_measurements.select { |dlm| dlm.duct_leakage_total_or_to_outside == HPXML::DuctLeakageToOutside }
+      sum_lto = lto_measurements.map { |dlm| dlm.duct_leakage_value }.sum(0.0)
+      if units == HPXML::UnitsCFM25
+        issue_warning = true if sum_lto > 0.04 * @cfa
+      elsif units == HPXML::UnitsCFM50
+        issue_warning = true if sum_lto > 0.06 * @cfa
+      elsif units == HPXML::UnitsPercent
+        issue_warning = true if sum_lto > 0.05
+      end
+      next unless issue_warning
+
+      runner.registerWarning('Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.')
+    end
+
     # Create HVAC availability sensor
     @hvac_availability_sensor = nil
     if not @hvac_unavailable_periods.empty?

HPXMLtoOpenStudio/measure.xml

@@ -3,8 +3,8 @@
   <schema_version>3.1</schema_version>
   <name>hpxm_lto_openstudio</name>
   <uid>b1543b30-9465-45ff-ba04-1d1f85e763bc</uid>
-  <version_id>9fce494a-3cea-4587-9ae5-dc36998cc01f</version_id>
-  <version_modified>2023-07-14T21:39:19Z</version_modified>
+  <version_id>6e25a3e5-f445-46f5-99c0-1aebcfb68c5e</version_id>
+  <version_modified>2023-07-17T18:38:57Z</version_modified>
   <xml_checksum>D8922A73</xml_checksum>
   <class_name>HPXMLtoOpenStudio</class_name>
   <display_name>HPXML to OpenStudio Translator</display_name>
@@ -130,7 +130,7 @@
       <filename>measure.rb</filename>
       <filetype>rb</filetype>
       <usage_type>script</usage_type>
-      <checksum>DC90C49F</checksum>
+      <checksum>9F4FD400</checksum>
     </file>
     <file>
       <filename>airflow.rb</filename>
@@ -262,7 +262,7 @@
       <filename>hpxml_schematron/EPvalidator.xml</filename>
       <filetype>xml</filetype>
       <usage_type>resource</usage_type>
-      <checksum>2C4F878F</checksum>
+      <checksum>1DE8759B</checksum>
     </file>
     <file>
       <filename>hpxml_schematron/iso-schematron.xsd</filename>
@@ -568,7 +568,7 @@
       <filename>test_validation.rb</filename>
       <filetype>rb</filetype>
       <usage_type>test</usage_type>
-      <checksum>0B975B0D</checksum>
+      <checksum>47AE7DEF</checksum>
     </file>
     <file>
       <filename>test_water_heater.rb</filename>

HPXMLtoOpenStudio/resources/hpxml_schematron/EPvalidator.xml

@@ -1367,10 +1367,6 @@
       <!-- Sum Checks -->
       <sch:assert role='ERROR' test='(sum(h:Ducts[h:DuctType="supply"]/h:FractionDuctArea) &gt;= 0.99 and sum(h:Ducts[h:DuctType="supply"]/h:FractionDuctArea) &lt;= 1.01) or count(h:Ducts[h:DuctType="supply"]/h:FractionDuctArea) = 0'>Expected sum(Ducts/FractionDuctArea) for DuctType="supply" to be 1</sch:assert>
       <sch:assert role='ERROR' test='(sum(h:Ducts[h:DuctType="return"]/h:FractionDuctArea) &gt;= 0.99 and sum(h:Ducts[h:DuctType="return"]/h:FractionDuctArea) &lt;= 1.01) or count(h:Ducts[h:DuctType="return"]/h:FractionDuctArea) = 0'>Expected sum(Ducts/FractionDuctArea) for DuctType="return" to be 1</sch:assert>
-      <!-- Warnings -->
-      <sch:report role='WARN' test='sum(h:DuctLeakageMeasurement/h:DuctLeakage[h:Units="CFM25" and h:TotalOrToOutside="to outside"]/h:Value) &gt; 0.04 * number(../../../../../h:BuildingSummary/h:BuildingConstruction/h:ConditionedFloorArea) and sum(h:Ducts[h:DuctLocation[text()!="living space" and text()!="basement - conditioned" and text()!="crawlspace - conditioned"]]/h:FractionDuctArea) = 0 and sum(h:Ducts[h:DuctLocation[text()!="living space" and text()!="basement - conditioned" and text()!="crawlspace - conditioned"]]/h:DuctSurfaceArea) = 0 and count(h:Ducts[h:FractionDuctArea | h:DuctSurfaceArea]) &gt; 0'>Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.</sch:report>
-      <sch:report role='WARN' test='sum(h:DuctLeakageMeasurement/h:DuctLeakage[h:Units="CFM50" and h:TotalOrToOutside="to outside"]/h:Value) &gt; 0.06 * number(../../../../../h:BuildingSummary/h:BuildingConstruction/h:ConditionedFloorArea) and sum(h:Ducts[h:DuctLocation[text()!="living space" and text()!="basement - conditioned" and text()!="crawlspace - conditioned"]]/h:FractionDuctArea) = 0 and sum(h:Ducts[h:DuctLocation[text()!="living space" and text()!="basement - conditioned" and text()!="crawlspace - conditioned"]]/h:DuctSurfaceArea) = 0 and count(h:Ducts[h:FractionDuctArea | h:DuctSurfaceArea]) &gt; 0'>Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.</sch:report>
-      <sch:report role='WARN' test='sum(h:DuctLeakageMeasurement/h:DuctLeakage[h:Units="Percent" and h:TotalOrToOutside="to outside"]/h:Value) &gt; 0.05 and sum(h:Ducts[h:DuctLocation[text()!="living space" and text()!="basement - conditioned" and text()!="crawlspace - conditioned"]]/h:FractionDuctArea) = 0 and sum(h:Ducts[h:DuctLocation[text()!="living space" and text()!="basement - conditioned" and text()!="crawlspace - conditioned"]]/h:DuctSurfaceArea) = 0 and count(h:Ducts[h:FractionDuctArea | h:DuctSurfaceArea]) &gt; 0'>Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.</sch:report>
     </sch:rule>
   </sch:pattern>
 

HPXMLtoOpenStudio/tests/test_validation.rb

@@ -1270,6 +1270,9 @@ def test_ruby_error_messages
   def test_ruby_warning_messages
     # Test case => Error message
     all_expected_warnings = { 'cfis-undersized-supplemental-fan' => ["CFIS supplemental fan 'VentilationFan2' is undersized (90.0 cfm) compared to the target hourly ventilation rate (110.0 cfm)."],
+                              'duct-lto-cfm25' => ['Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.'],
+                              'duct-lto-cfm50' => ['Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.'],
+                              'duct-lto-percent' => ['Ducts are entirely within conditioned space but there is moderate leakage to the outside. Leakage to the outside is typically zero or near-zero in these situations, consider revising leakage values. Leakage will be modeled as heat lost to the ambient environment.'],
                               'hvac-setpoint-adjustments' => ['HVAC setpoints have been automatically adjusted to prevent periods where the heating setpoint is greater than the cooling setpoint.'],
                               'hvac-setpoint-adjustments-daily-setbacks' => ['HVAC setpoints have been automatically adjusted to prevent periods where the heating setpoint is greater than the cooling setpoint.'],
                               'hvac-setpoint-adjustments-daily-schedules' => ['HVAC setpoints have been automatically adjusted to prevent periods where the heating setpoint is greater than the cooling setpoint.'],
@@ -1353,6 +1356,39 @@ def test_ruby_warning_messages
         hpxml = HPXML.new(hpxml_path: File.join(@sample_files_path, 'base-mechvent-cfis-supplemental-fan-exhaust.xml'))
         suppl_fan = hpxml.ventilation_fans.find { |f| f.is_cfis_supplemental_fan? }
         suppl_fan.tested_flow_rate = 90.0
+      elsif ['duct-lto-cfm25'].include? warning_case
+        hpxml = HPXML.new(hpxml_path: File.join(@sample_files_path, 'base-atticroof-conditioned.xml'))
+        hpxml.hvac_distributions[0].conditioned_floor_area_served = hpxml.building_construction.conditioned_floor_area
+        hpxml.hvac_distributions[0].duct_leakage_measurements.each do |dlm|
+          dlm.duct_leakage_units = HPXML::UnitsCFM25
+          dlm.duct_leakage_value = 100.0
+        end
+        hpxml.hvac_distributions[0].ducts.each do |duct|
+          duct.duct_surface_area = nil
+          duct.duct_location = nil
+        end
+      elsif ['duct-lto-cfm50'].include? warning_case
+        hpxml = HPXML.new(hpxml_path: File.join(@sample_files_path, 'base-atticroof-conditioned.xml'))
+        hpxml.hvac_distributions[0].conditioned_floor_area_served = hpxml.building_construction.conditioned_floor_area
+        hpxml.hvac_distributions[0].duct_leakage_measurements.each do |dlm|
+          dlm.duct_leakage_units = HPXML::UnitsCFM50
+          dlm.duct_leakage_value = 200.0
+        end
+        hpxml.hvac_distributions[0].ducts.each do |duct|
+          duct.duct_surface_area = nil
+          duct.duct_location = nil
+        end
+      elsif ['duct-lto-percent'].include? warning_case
+        hpxml = HPXML.new(hpxml_path: File.join(@sample_files_path, 'base-atticroof-conditioned.xml'))
+        hpxml.hvac_distributions[0].conditioned_floor_area_served = hpxml.building_construction.conditioned_floor_area
+        hpxml.hvac_distributions[0].duct_leakage_measurements.each do |dlm|
+          dlm.duct_leakage_units = HPXML::UnitsPercent
+          dlm.duct_leakage_value = 0.2
+        end
+        hpxml.hvac_distributions[0].ducts.each do |duct|
+          duct.duct_surface_area = nil
+          duct.duct_location = nil
+        end
       elsif ['hvac-setpoint-adjustments'].include? warning_case
         hpxml = HPXML.new(hpxml_path: File.join(@sample_files_path, 'base.xml'))
         hpxml.hvac_controls[0].heating_setpoint_temp = 76.0

workflow/hpxml_inputs.json

@@ -711,8 +711,8 @@
     "geometry_unit_num_floors_above_grade": 2,
     "geometry_unit_cfa": 3600,
     "geometry_attic_type": "ConditionedAttic",
-    "ducts_supply_leakage_to_outside_value": 50,
-    "ducts_return_leakage_to_outside_value": 100,
+    "ducts_supply_leakage_to_outside_value": 5,
+    "ducts_return_leakage_to_outside_value": 10,
     "ducts_supply_location": "living space",
     "ducts_return_location": "living space",
     "water_heater_location": "basement - conditioned",

workflow/sample_files/base-atticroof-conditioned.xml

@@ -443,15 +443,15 @@
                   <DuctType>supply</DuctType>
                   <DuctLeakage>
                     <Units>CFM25</Units>
-                    <Value>50.0</Value>
+                    <Value>5.0</Value>
                     <TotalOrToOutside>to outside</TotalOrToOutside>
                   </DuctLeakage>
                 </DuctLeakageMeasurement>
                 <DuctLeakageMeasurement>
                   <DuctType>return</DuctType>
                   <DuctLeakage>
                     <Units>CFM25</Units>
-                    <Value>100.0</Value>
+                    <Value>10.0</Value>
                     <TotalOrToOutside>to outside</TotalOrToOutside>
                   </DuctLeakage>
                 </DuctLeakageMeasurement>

workflow/tests/base_results/results.csv

@@ -13,7 +13,7 @@ base-appliances-propane-location-portland-or.xml,55.136,55.136,29.779,29.779,20.
 base-appliances-propane.xml,60.283,60.283,33.25,33.25,22.167,0.0,4.866,0.0,0.0,0.0,0.0,0.366,0.0,0.0,4.392,0.853,9.163,0.0,0.0,4.51,0.0,0.334,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,0.135,0.105,0.0,2.114,8.374,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,22.167,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1.797,3.069,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,20.759,0.0,14.344,9.233,0.614,0.0,0.0,0.0,0.0,1987.8,3146.8,3146.8,22.994,18.213,0.0,3.552,3.64,0.512,7.517,0.63,10.524,-12.551,0.0,0.0,0.0,8.295,-0.065,4.983,0.0,0.487,0.0,4.815,-9.423,-2.499,0.0,-0.057,-0.465,-0.052,2.676,-0.027,-1.946,11.732,0.0,0.0,0.0,-6.361,-0.061,-1.213,-3.111,-0.111,0.0,3.177,8.334,2.011,1354.8,997.6,11399.5,2615.8,0.0,36000.0,24000.0,0.0,6.8,91.76,32235.0,8595.0,7508.0,0.0,575.0,6840.0,0.0,0.0,1949.0,2171.0,4597.0,18786.0,5328.0,7037.0,0.0,207.0,265.0,0.0,0.0,0.0,2010.0,619.0,3320.0,0.0,0.0,0.0,0.0
 base-appliances-wood.xml,60.283,60.283,33.25,33.25,22.167,0.0,0.0,4.866,0.0,0.0,0.0,0.366,0.0,0.0,4.392,0.853,9.163,0.0,0.0,4.51,0.0,0.334,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,0.135,0.105,0.0,2.114,8.374,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,22.167,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,1.797,3.069,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,20.759,0.0,14.344,9.233,0.614,0.0,0.0,0.0,0.0,1987.8,3146.8,3146.8,22.994,18.213,0.0,3.552,3.64,0.512,7.517,0.63,10.524,-12.551,0.0,0.0,0.0,8.295,-0.065,4.983,0.0,0.487,0.0,4.815,-9.423,-2.499,0.0,-0.057,-0.465,-0.052,2.676,-0.027,-1.946,11.732,0.0,0.0,0.0,-6.361,-0.061,-1.213,-3.111,-0.111,0.0,3.177,8.334,2.011,1354.8,997.6,11399.5,2615.8,0.0,36000.0,24000.0,0.0,6.8,91.76,32235.0,8595.0,7508.0,0.0,575.0,6840.0,0.0,0.0,1949.0,2171.0,4597.0,18786.0,5328.0,7037.0,0.0,207.0,265.0,0.0,0.0,0.0,2010.0,619.0,3320.0,0.0,0.0,0.0,0.0
 base-atticroof-cathedral.xml,62.108,62.108,35.78,35.78,26.327,0.0,0.0,0.0,0.0,0.0,0.0,0.434,0.0,0.0,4.116,0.788,9.165,0.0,0.0,4.51,0.0,0.334,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,1.513,1.528,0.0,2.114,8.374,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,26.327,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,24.636,0.0,13.096,9.233,0.616,0.0,0.0,0.0,0.0,2144.9,2994.5,2994.5,22.741,15.269,6.752,0.0,4.218,0.511,7.47,0.631,13.357,-15.479,0.0,0.0,0.0,8.316,-0.088,9.307,0.0,0.728,0.0,0.0,-8.943,-2.507,0.15,0.0,-0.5,-0.047,2.763,-0.016,-2.011,15.663,0.0,0.0,0.0,-6.322,-0.063,-2.08,-3.866,-0.157,0.0,0.0,7.837,2.003,1354.8,997.6,11399.5,2615.8,0.0,36000.0,24000.0,0.0,6.8,91.76,29821.0,0.0,9510.0,0.0,575.0,7194.0,3697.0,0.0,1949.0,0.0,6896.0,15704.0,0.0,9971.0,0.0,207.0,302.0,975.0,0.0,0.0,0.0,929.0,3320.0,0.0,0.0,0.0,0.0
-base-atticroof-conditioned.xml,67.293,67.293,40.782,40.782,26.511,0.0,0.0,0.0,0.0,0.0,0.0,0.437,0.0,0.0,4.921,0.983,9.068,0.0,0.0,5.751,0.0,0.398,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,1.513,1.528,0.0,2.114,11.166,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,26.511,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,24.831,0.0,16.409,9.18,0.614,0.0,0.0,0.0,0.0,2378.3,3719.8,3719.8,26.547,20.758,4.552,1.164,5.544,0.518,7.651,0.635,15.399,-16.987,0.0,0.0,0.0,8.521,-0.082,7.083,0.0,0.73,0.0,3.11,-10.232,-3.183,0.005,0.021,-0.566,-0.053,2.687,-0.029,-3.027,17.676,0.0,0.0,0.0,-6.349,-0.075,-1.69,-4.153,-0.166,0.0,0.937,8.933,2.568,1354.8,997.6,11399.6,2521.8,0.0,36000.0,24000.0,0.0,6.8,91.76,38184.0,7494.0,10436.0,0.0,575.0,7982.0,2464.0,0.0,1949.0,724.0,6561.0,18712.0,182.0,11700.0,0.0,207.0,1098.0,650.0,0.0,0.0,670.0,886.0,3320.0,0.0,0.0,0.0,0.0
+base-atticroof-conditioned.xml,63.998,63.998,40.48,40.48,23.519,0.0,0.0,0.0,0.0,0.0,0.0,0.388,0.0,0.0,4.716,0.934,9.068,0.0,0.0,5.751,0.0,0.398,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,1.513,1.528,0.0,2.114,11.166,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,23.519,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,22.009,0.0,15.57,9.18,0.614,0.0,0.0,0.0,0.0,2372.9,3431.1,3431.1,22.556,17.978,4.552,1.164,5.544,0.518,7.652,0.634,15.396,-16.987,0.0,0.0,0.0,8.521,-0.079,7.082,0.0,0.73,0.0,0.283,-10.23,-3.183,0.006,0.021,-0.566,-0.053,2.688,-0.03,-3.03,17.676,0.0,0.0,0.0,-6.349,-0.073,-1.691,-4.146,-0.166,0.0,0.089,8.934,2.568,1354.8,997.6,11399.6,2521.8,0.0,36000.0,24000.0,0.0,6.8,91.76,31467.0,777.0,10436.0,0.0,575.0,7982.0,2464.0,0.0,1949.0,724.0,6561.0,18531.0,0.0,11700.0,0.0,207.0,1098.0,650.0,0.0,0.0,670.0,886.0,3320.0,0.0,0.0,0.0,0.0
 base-atticroof-flat.xml,55.025,55.025,35.109,35.109,19.917,0.0,0.0,0.0,0.0,0.0,0.0,0.329,0.0,0.0,3.657,0.683,9.164,0.0,0.0,4.51,0.0,0.334,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,1.513,1.528,0.0,2.114,8.374,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,19.917,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,18.638,0.0,11.332,9.233,0.615,0.0,0.0,0.0,0.0,2122.7,2676.8,2676.8,17.665,11.983,6.031,0.0,3.609,0.508,7.438,0.623,10.437,-12.555,0.0,0.0,0.0,8.179,-0.074,4.797,0.0,0.727,0.0,0.0,-8.909,-2.5,0.306,0.0,-0.447,-0.049,2.732,-0.023,-1.898,11.723,0.0,0.0,0.0,-6.268,-0.048,-1.153,-3.026,-0.163,0.0,0.0,7.87,2.01,1354.8,997.6,11399.5,2615.8,0.0,36000.0,24000.0,0.0,6.8,91.76,24776.0,0.0,7508.0,0.0,575.0,6840.0,3307.0,0.0,1949.0,0.0,4597.0,12320.0,0.0,7037.0,0.0,207.0,265.0,872.0,0.0,0.0,0.0,619.0,3320.0,0.0,0.0,0.0,0.0
 base-atticroof-radiant-barrier.xml,37.385,37.385,33.168,33.168,4.217,0.0,0.0,0.0,0.0,0.0,0.0,0.018,0.0,0.0,9.236,1.963,6.821,0.0,0.0,2.647,0.0,0.238,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,1.513,1.528,0.0,2.114,4.187,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,4.217,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,3.893,0.0,31.745,6.675,0.58,0.0,0.0,0.0,0.0,1819.0,3190.7,3190.7,13.54,17.969,0.0,6.125,1.589,0.0,0.0,0.33,4.482,-5.968,0.0,0.0,0.0,0.856,-0.331,0.992,0.0,0.4,0.0,0.104,-4.05,-0.858,0.0,2.477,0.172,0.0,0.0,0.203,2.089,16.047,0.0,0.0,0.0,2.125,-0.323,-0.274,-1.707,-0.047,0.0,0.366,9.113,1.789,1354.8,997.6,9989.0,2461.3,0.0,24000.0,24000.0,0.0,25.88,98.42,25739.0,1416.0,5241.0,0.0,401.0,1535.0,0.0,0.0,8539.0,6846.0,1760.0,22162.0,65.0,7662.0,0.0,313.0,637.0,0.0,0.0,0.0,9596.0,568.0,3320.0,1629.0,437.0,392.0,800.0
 base-atticroof-unvented-insulated-roof.xml,57.557,57.557,35.266,35.266,22.291,0.0,0.0,0.0,0.0,0.0,0.0,0.368,0.0,0.0,3.755,0.701,9.166,0.0,0.0,4.51,0.0,0.334,0.0,0.0,0.0,0.0,2.22,0.0,0.0,0.319,0.365,1.513,1.528,0.0,2.114,8.374,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,22.291,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,0.0,20.862,0.0,11.601,9.233,0.615,0.0,0.0,0.0,0.0,2113.8,2770.7,2770.7,19.263,13.198,0.0,5.41,3.618,0.509,7.459,0.625,10.466,-12.56,0.0,0.0,0.0,8.254,-0.063,4.802,0.0,0.728,0.0,2.71,-8.917,-2.501,0.0,-1.422,-0.414,-0.045,2.832,-0.014,-1.793,11.723,0.0,0.0,0.0,-6.09,-0.054,-1.129,-2.881,-0.16,0.0,1.401,7.863,2.008,1354.8,997.6,11399.5,2615.8,0.0,36000.0,24000.0,0.0,6.8,91.76,30483.0,4824.0,7508.0,0.0,575.0,6840.0,0.0,0.0,1949.0,4190.0,4597.0,19417.0,1771.0,7037.0,0.0,207.0,265.0,0.0,0.0,0.0,6198.0,619.0,3320.0,0.0,0.0,0.0,0.0