MillenniumOS v0.5.0-rc7

What's Changed

• Add Web and Pocket X/Y Probing Cycles by @benagricola in #188
• Rename instead of deleting discarded restore points by @benagricola in #193

Notes

• Not compatible with RRF v3.5.x. You will need to run RRF v3.6.x to use this release successfully!

Full Changelog: v0.5.0-rc6...v0.5.0-rc7

MillenniumOS v0.5.0-rc6

What's Changed

• Fix zero-rpm and rpm change checks in Fusion360 post by @benagricola in #191
• Remove multi-axis strategy check in Fusion360 post by @benagricola in #192

Notes

• Not compatible with RRF v3.5.x. You will need to run RRF v3.6.x to use this release successfully!

Full Changelog: v0.5.0-rc5...v0.5.0-rc6

MillenniumOS v0.5.0-rc5

What's Changed

• Reduce length of dialog line in wizard by @benagricola in #187

Notes

• Not compatible with RRF v3.5.x. You will need to run RRF v3.6.x to use this release successfully!

Full Changelog: v0.5.0-rc4...v0.5.0-rc5

MillenniumOS v0.5.0-rc4

What's Changed

• Throw error if probe not selected in execution macro by @benagricola in #185 and #186

Notes

• Not compatible with RRF v3.5.x. You will need to run RRF v3.6.x to use this release successfully!

Full Changelog: v0.5.0-rc3...v0.5.0-rc4

MillenniumOS v0.4.4

Fix unconfigured spindles causing park failure

Signed-off-by: Ben Agricola [email protected]

MillenniumOS v0.5.0-rc3

Notes

• Not compatible with RRF v3.5.x. You will need to run RRF v3.6.x to use this release successfully!

What's Changed

• Adding in control for Air, Mist and Flood coolant on cancel by @kadders in #178
• Use v3.6-dev feed rate override on probing moves by @benagricola in #160
• Allow probe cycles to report status for MillenniumOS-UI by @benagricola in #177
• Check for null tool before tool comparisons by @benagricola in #182
• Fix lazily allocated tool tackle check by @benagricola in #183
• Make M4000 tool similarity checks more robust by @benagricola in #184

New Contributors

• @kadders made their first contribution in #178

Full Changelog: v0.5.0-rc2...v0.5.0-rc3

MillenniumOS v0.4.3

What's Changed

• Check for null tools during tool comparisons by @benagricola in #182

Full Changelog: v0.4.2...v0.4.3

MillenniumOS v0.5.0-rc2

What's Changed

• Fix unconfigured spindles causing park failure by @benagricola in #176

Full Changelog: v0.5.0-rc1...v0.5.0-rc2

MillenniumOS v0.5.0-rc1

What's Changed

• Add spindle reverse support and update posts by @benagricola in #174
• Improved Rotation Compensation and Probe Deflection - Add new G6513 surface probe by @benagricola in #172 and #169
• Do not try to access pwm state on null gpOut pins by @benagricola in #173
• Add some feature explainers to the wizard by @benagricola in #175
• Fix release url to include tag by @kohlerj in #165

Notes

• Probing methods that deal with flat surfaces (rectangle block and pocket, outside corner and vise corner) now use G6513 to run their probing cycles. This macro moves in both X and Y at the same time to reach the next probe point. It is important to remember this, because the machine will not move in the same manner you are used to with previous versions.
• Corner probes will now retract to a safe height before moving diagonally across the corner to reach the next probing point. They will no longer run down the first surface and outside to the Y surface.
• Rectangle block probes will now do the same, retracting after the second X surface to move diagonally across the corner to reach Y.
• This is arguably safer because it avoids moving around the outside of the corner, but may be slightly slower as it involves a retract and return to the probe height.

New Contributors

• @kohlerj made their first contribution in #165

Full Changelog: release-b15f84e82d3f8e4582bb81f67d973269611cce01...v0.5.0-rc1

MillenniumOS v0.4.2

What's Changed

• Do not try to access pwm state on null gpOut pins by @benagricola in #173
• Disable rotation compensation when probing by @benagricola in 54c0956

Full Changelog: v0.4.0...release-54c0956ea8ec23120863e589307fc48f84461972