Some Smartmeters expose their current reading through an infrared LED and send it as serial data, either in a regular interval or per request. This project makes an ESP8266 understand this data and provides it in a format, that can be imported by Prometheus monitoring software.
To interface the ESP with the Smartmeter, you need some hardware to receive and (if needed) send infrared signals. See e.g. here (german site) for some details about this. The writing/reading head should then be connected to some pins on the ESP that act as a SoftwareSerial interface (see Configuration).
This project is built using PlatformIO.
This code is currently only compatible with the EasyMeter Q3D model of a german manufacturer. This Smartmeter uses a OBIS-based text format to transmit it's data in a 2 second interval. Requesting data using an infrared LED on the ESP side is not required for this model, but I added support for this to my code anyway.
I'm open for pull requests that extend the support to other models. Also support for the more broadly used SML protocol should be fairly easy to add.
Before compiling the code, please create a src/config.h file where your configuration lives. You can find a template for this in src/config.sample.h.
To see which metrics are exposed, please point your browser to http://<device name or IP>/metrics. You can add this URL to your Prometheus instance.
When your ESP is flashed and properly installed at it's final location, it's useful to flash updates over the air. To do this, either visit http://<device name or IP>/update or use the following command to upload a new firmware:
curl -u USER:PASSWORD -F "[email protected]/build/esp12e/firmware.bin" http://<device name or IP>/update
Have fun!