Home

Welcome to the LaserWeb/CNCWeb wiki!

This is the official documentation for LaserWeb/CNCWeb initiated by Anthony Bolgar (RIP!). Further information can be found on the LaserWeb website https://laserweb.yurl.ch

LaserWeb / CNCWeb 4.0 is an application for:

Generating GCODE from DXF/SVG/BITMAP/JPG/PNG files for Lasers and CNC Mills

Controlling a connected CNC / Laser machine (running either Grbl, Smoothieware, TinyG or MarlinKimbra)

This Application is built for Chrome Browser only!

Credits:

Todd Fleming (CNC CAM Modules, WebGL and CAM UI)
Claudio Prezzi (Communications Modules and Server)
Jorge Robles (Settings Module, User Interface)
Monte Krol (User Interface, Electron Installer)
Anthony Tamrin (Electron Installer)
Sebastien Mischler (Dev Backend, Raster Module, SVG Parser)
Ariel Yahni (Beta testing)
Anthony Bolgar (RIP!, Documentation)
Peter van der Walt (Project Founder, retired from project)

And of course all the users who have helped move this project along. 

Disclaimer:

You will not hold the author or contributors of LaserWeb liable for any damage to equipment or persons from the use of LaserWeb.

You know the potential hazards in using high power lasers and high voltages.

You will wear professional laser-eye-protection when using a laser controlled by LaserWeb.

You will use the LaserWeb software in a legal and safe manner.

You relieve the author and contributors from any liability arising from the use or distribution of the LaserWeb software.

You are entirely operating at your own risk. Lasers can be lethally dangerous.