Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Send ROCs while switch paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Send ROCs while switch paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch PILTs against ePILTs while paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch PILTs against ePILTs while paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch PILTs against ePILTs while paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch ePILTs against PILTs while paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch ePILTs against PILTs while paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/pauseSwitch.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch ePILTs against PILTs while paused". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Failed to apply inherents ❯ initNewBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:193:19 ❯ Module.buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/block-builder.js:300:44 ❯ TxPool.#buildBlock node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:223:47 ❯ TxPool.#buildBlockIfNeeded node_modules/@acala-network/chopsticks-core/dist/esm/blockchain/txpool.js:207:13 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Error: Snapshot `Switch KILTs against EKILTs no enough DOTs on AH > sender Peregrine::xcmpQueue::[XcmpMessageSent] 2` mismatched ❯ Checker.toMatchSnapshot node_modules/@acala-network/chopsticks-testing/dist/esm/check.js:163:51 This error originated in "src/tests/switchPallet/switchConfig.test.ts" test file. It doesn't mean the error was thrown inside the file itself, but while it was running. The latest test that might've caused the error is "Switch KILTs against EKILTs no enough DOTs on AH". It might mean one of the following: - The error was thrown, while Vitest was running this test. - If the error occurred after the test had been completed, this was the last documented test before it was thrown.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.

Input 'save-always' has been deprecated with message: save-always does not work as intended and will be removed in a future release. A separate `actions/cache/restore` step should be used instead. See https://github.com/actions/cache/tree/main/save#always-save-cache for more details.