Skip to content

IntrepidPursuits/cocoapods-introduction

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

8 Commits
 
 
 
 
 
 

Repository files navigation

Cocoapods

CocoaPods is a dependency manager for Swift and Objective-C Cocoa projects. Its used in just about every iOS project here at Intrepid.

Here is how to set it up.

Installing Cocoapods

  • Open Terminal
  • Enter command: sudo gem install cocoapods
  • Enter your password

Wait for this to finish, don't touch your terminal. It might take a couple minutes

  • Run command pod setup

Setting Up Command Line Text Editor

Sublime
  • Download Sublime here
  • Install commandline tools following instructions here
Atom (My Preference)
  • Download Atom here
  • Install atom commandline tools by opening Atom and selecting Atom > Install Shell Commands

Continuing forward, all commandline references will use the atom keyword. Replace this with whatever you have designated as your text editor.

Setting Up Cocoapods

If New Project

  • Create your Xcode Project
  • Make sure that Create git repository is selected > If you forgot to select this, just continue to the Existing Project section

If Existing Project

If your project is already setup with a git repository, skip this step.

  • Open terminal
  • Enter command cd ~/path/to/your/project
  • Enter command git init

Setup Gitignore

  • Open terminal
  • Enter command cd ~/path/to/your/project (if necessary)
  • Enter command atom .gitignore
  • Add Pods/ to your gitignore
  • If your .gitignore is empty, add the following:
# Xcode
#
build/
*.pbxuser
!default.pbxuser
*.mode1v3
!default.mode1v3
*.mode2v3
!default.mode2v3
*.perspectivev3
!default.perspectivev3
xcuserdata
*.xccheckout
*.moved-aside
DerivedData
*.hmap
*.ipa
*.xcuserstate

# CocoaPods
#
# We recommend against adding the Pods directory to your .gitignore. However
# you should judge for yourself, the pros and cons are mentioned at:
# http://guides.cocoapods.org/using/using-cocoapods.html#should-i-ignore-the-pods-directory-in-source-control
#
Pods/
  • Save your .gitignore file cmd + s

Add Podfile

  • Open terminal
  • Enter command pod init
  • Uncomment the platform line to specify a platform (ex. platform :ios, '8.0')

Add Pods

You add pods to your project using the following syntax:

pod '<#pod name#>', '<#pod version#>'

A simple example would look like this:

pod 'AFNetworking', '1.0'

Or, to get the latest version, you can omit the version from the declaration:

pod 'AFNetworking'

There are more complex arguments regarding version available here

Basic Podfile Example

source 'https://github.com/CocoaPods/Specs.git'

platform :ios, '9.0'

target 'ProjectName' do
  pod 'SVProgressHUD'
  pod 'AFNetworking'
end

If you already have a workspace created, you'll need to specify this in your podfile by adding: workspace 'MyWorkspace'

Installing Dependencies

Now we're going to integrate our libraries into the Xcode project.

  • Close Xcode Project
  • Open Terminal
  • Enter command cd ~/path/to/your/project
  • Enter command pod install

Wait for this to finish, depending on the requirements of the Podfile, particularly with new projects, this may take a minute or two. Just leave it.

When cocoapods is done installing libraries, you will get a terminal readout that says:

[!] From now on use <#Your Project#>.xcworkspace.

Follow this instruction and henceforth, use the workspace instead of your project.

Importing And Using Libraries

In your project, if you want to use a library you can do so by adding

import SomeCocoaPod

More Info on Podfiles

More on the Podfile: http://guides.cocoapods.org/using/the-podfile.html

Pod Errors

Occasionally, imported libraries will have errors or warnings generated in Xcode, these can be silenced if desired by adding the following to the Podfile

inhibit_all_warnings!

To prevent warnings on a library specific basis, you can use the following syntax:

pod 'SomePodWithWarnings', :inhibit_warnings => true

Credit Where Credit Is Due

Follow Up Excercise - Using Cocoapods

Overview:

Make sure you know how to use cocoapods! To test this knowledge, add a pod to this project and leverage what it has to offer.

Getting Started:

  1. Clone repository (or continue working off your previously cloned repo).
  2. Create a new branch off master and name the branch according to the form {name}/cocoapods-exercise (e.g. epeterson/cocoapods-exercise).

Your Task:

  1. Add this pod to your project: https://github.com/cbpowell/MarqueeLabel
  2. Add a marquee'd label to the primary View Controller such that the following is true
  • The marquee scroll should wrap around to its original position after scrolling through the text (traveling left)
  • The marquee's animation curve is EASE IN / EASE OUT
  • The marquee scrolls at 30 pixels per second
  • The marquee will only scroll after being tapped by the user
  • The marquee's text is as follows: "According to all known laws of aviation, there is no way a bee should be able to fly. Its wings are too small to get its fat little body off the ground. The bee, of course, flies anyway because bees don't care what humans think is impossible."
  • There is a 10 pixel buffer between the last character in the label and the first one
  1. Open up a Pull Request to be reviewed by your instructor, But Do Not Merge It Into This Repo

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages