This public distribution of OpenBMC is no longer maintained by Intel. This public distribution is not updated to the latest OpenBMC versions and has been identified as having known security escapes. Intel has ceased development and contributions to this public distribution and is not doing any maintenance, bug fixes, new releases, or updates here. Intel no longer accepts patches to this public distribution. Intel recommends working with an independent firmware vendor for future support
Intel-BMC/openbmc is a BMC implementation for servers. The purpose is to provide early access to features and capabilities which have not yet been accepted or merged in the OpenBMC main project (github.com/openbmc). In due course, all of the capabilities here will be brought to the OpenBMC project.
For questions or support please email [email protected].
Some answers to the main questions that tend to get asked:
No. This repo is for components that are intended for the eventual release to the LF OpenBMC project. There are a number of reasons where things might be checked in here. For example: functionality that is still under discussion or in the LF OpenBMC project, features that have not gone through the level of testing or integration needed to be included in the OpenBMC project
Upstreaming changes to the linux kernel, uboot, systemd, yocto, and the various projects that OpenBMC pulls in requires a significant effort. While we aspire to that process being fast, painless, and with minimal rework, the reality is far from that, and features or functions that require changes across a number of repos require a coordinated effort, and a single source of function. As a general rule, this repository loosens the requirements of "form over function" and prefers to make some simplifying assumptions of BMC capabilities, chipsets, and required features.
It very much depends on the component. While in general the answer ends up being "yes", prior approval should be granted, as this repo contains future facing capabilities that may not have been announced yet. Please email [email protected] to discuss. Appropriate licenses will be applied to the portions of this codebase that are approved for upstreaming.
export TEMPLATECONF=meta-openbmc-mods/meta-wolfpass/conf
source oe-init-build-env
bitbake intel-platformsexport TEMPLATECONF=meta-openbmc-mods/meta-wht/conf
source oe-init-build-env
bitbake intel-platformsTo meet Intel security requirements, this OpenBMC implementation will not have default user credentials enabled by default.
IPMI commands are available to enable the root user for serial console access and to enable users for IPMI, Redfish, and web access.
There is also a "debug-tweaks" feature that can be added to a build to
re-enable the default user credentials.
Without "debug-tweaks", the root user is disabled by default.
The following IPMI command can be used to enable the root user. This root user allows access to the BMC serial console, but cannot be used to access IPMI, Redfish, or the web console.
IPMI OEM net function 0x30, command 0x5f. For root user, the first byte is 0 followed by the password.
For example, to enable the root user with password 0penBmc1:
ipmitool raw 0x30 0x5f 0x00 0x30 0x70 0x65 0x6e 0x42 0x6d 0x63 0x31
Without "debug-tweaks", there are no IPMI, Redfish, or web users by default.
The standard IPMI commands to set usernames and passwords are supported. These users allow access to IPMI, Redfish, and the web console, but cannot be used to access the BMC serial console.
Debug features, including the default user credentials, can be enabled by
adding the "debug-tweaks" feature to the build by including the following
in your local.conf file:
EXTRA_IMAGE_FEATURES += "debug-tweaks"
