Neogit

A work-in-progress Magit clone for Neovim.

Installation

Here's an example spec for Lazy, but you're free to use whichever plugin manager suits you.

{
  "NeogitOrg/neogit",
  dependencies = {
    "nvim-lua/plenary.nvim",         -- required
    "nvim-telescope/telescope.nvim", -- optional
    "sindrets/diffview.nvim",        -- optional
  },
  config = true
}

If you're not using lazy, you'll need to require and setup the plugin like so:

-- init.lua
local neogit = require('neogit')
neogit.setup {}

Configuration

You can configure neogit by running the neogit.setup() function, passing a table as the argument.

Default Config

local neogit = require("neogit")

neogit.setup {
  -- Hides the hints at the top of the status buffer
  disable_hint = false,
  -- Disables changing the buffer highlights based on where the cursor is.
  disable_context_highlighting = false,
  -- Disables signs for sections/items/hunks
  disable_signs = false,
  -- Do not ask to confirm the commit - just do it when the buffer is closed.
  disable_commit_confirmation = false,
  -- Uses `vim.notify` instead of the built-in notification system.
  disable_builtin_notifications = false,
  -- Changes what mode the Commit Editor starts in. `true` will leave nvim in normal mode, `false` will change nvim to insert mode, and `"auto"` will change nvim to insert mode IF the commit message is empty, otherwise leaving it in normal mode.
  disable_insert_on_commit = true,
  -- Allows a different telescope sorter. Defaults to 'fuzzy_with_index_bias'. The example below will use the native fzf
  -- sorter instead. By default, this function returns `nil`.
  telescope_sorter = function()
    return require("telescope").extensions.fzf.native_fzf_sorter()
  end,
  -- Persist the values of switches/options within and across sessions
  remember_settings = true,
  -- Scope persisted settings on a per-project basis
  use_per_project_settings = true,
  -- Table of settings to never persist. Uses format "Filetype--cli-value"
  ignored_settings = {
    "NeogitPushPopup--force-with-lease",
    "NeogitPushPopup--force",
    "NeogitPullPopup--rebase",
    "NeogitCommitPopup--allow-empty",
    "NeogitRevertPopup--no-edit",
  },
  -- Neogit refreshes its internal state after specific events, which can be expensive depending on the repository size.
  -- Disabling `auto_refresh` will make it so you have to manually refresh the status after you open it.
  auto_refresh = true,
  -- Value used for `--sort` option for `git branch` command
  -- By default, branches will be sorted by commit date descending
  -- Flag description: https://git-scm.com/docs/git-branch#Documentation/git-branch.txt---sortltkeygt
  -- Sorting keys: https://git-scm.com/docs/git-for-each-ref#_options
  sort_branches = "-committerdate",
  -- Change the default way of opening neogit
  kind = "tab",
  -- The time after which an output console is shown for slow running commands
  console_timeout = 2000,
  -- Automatically show console if a command takes more than console_timeout milliseconds
  auto_show_console = true,
  status = {
    recent_commit_count = 10,
  },
  commit_editor = {
    kind = "split",
  },
  commit_select_view = {
    kind = "tab",
  },
  commit_view = {
    kind = "vsplit",
  },
  log_view = {
    kind = "tab",
  },
  rebase_editor = {
    kind = "split",
  },
  reflog_view = {
    kind = "tab",
  },
  merge_editor = {
    kind = "split",
  },
  preview_buffer = {
    kind = "split",
  },
  popup = {
    kind = "split",
  },
  signs = {
    -- { CLOSED, OPENED }
    hunk = { "", "" },
    item = { ">", "v" },
    section = { ">", "v" },
  },
  -- Each Integration is auto-detected through plugin presence, however, it can be disabled by setting to `false`
  integrations = {
    -- If enabled, use telescope for menu selection rather than vim.ui.select.
    -- Allows multi-select and some things that vim.ui.select doesn't.
    telescope = nil,
    -- Neogit only provides inline diffs. If you want a more traditional way to look at diffs, you can use `diffview`.
    -- The diffview integration enables the diff popup.
    --
    -- Requires you to have `sindrets/diffview.nvim` installed.
    diffview = nil,
  },
  sections = {
    -- Reverting/Cherry Picking
    sequencer = {
      folded = false,
      hidden = false,
    },
    untracked = {
      folded = false,
      hidden = false,
    },
    unstaged = {
      folded = false,
      hidden = false,
    },
    staged = {
      folded = false,
      hidden = false,
    },
    stashes = {
      folded = true,
      hidden = false,
    },
    unpulled_upstream = {
      folded = true,
      hidden = false,
    },
    unmerged_upstream = {
      folded = false,
      hidden = false,
    },
    unpulled_pushRemote = {
      folded = true,
      hidden = false,
    },
    unmerged_pushRemote = {
      folded = false,
      hidden = false,
    },
    recent = {
      folded = true,
      hidden = false,
    },
    rebase = {
      folded = true,
      hidden = false,
    },
  },
  mappings = {
    finder = {
      ["<cr>"] = "Select",
      ["<c-c>"] = "Close",
      ["<esc>"] = "Close",
      ["<c-n>"] = "Next",
      ["<c-p>"] = "Previous",
      ["<down>"] = "Next",
      ["<up>"] = "Previous",
      ["<tab>"] = "MultiselectToggleNext",
      ["<s-tab>"] = "MultiselectTogglePrevious",
      ["<c-j>"] = "NOP",
    },
    -- Setting any of these to `false` will disable the mapping.
    status = {
      ["q"] = "Close",
      ["I"] = "InitRepo",
      ["1"] = "Depth1",
      ["2"] = "Depth2",
      ["3"] = "Depth3",
      ["4"] = "Depth4",
      ["<tab>"] = "Toggle",
      ["x"] = "Discard",
      ["s"] = "Stage",
      ["S"] = "StageUnstaged",
      ["<c-s>"] = "StageAll",
      ["u"] = "Unstage",
      ["U"] = "UnstageStaged",
      ["d"] = "DiffAtFile",
      ["$"] = "CommandHistory",
      ["#"] = "Console",
      ["<c-r>"] = "RefreshBuffer",
      ["<enter>"] = "GoToFile",
      ["<c-v>"] = "VSplitOpen",
      ["<c-x>"] = "SplitOpen",
      ["<c-t>"] = "TabOpen",
      ["?"] = "HelpPopup",
      ["D"] = "DiffPopup",
      ["p"] = "PullPopup",
      ["r"] = "RebasePopup",
      ["m"] = "MergePopup",
      ["P"] = "PushPopup",
      ["c"] = "CommitPopup",
      ["l"] = "LogPopup",
      ["v"] = "RevertPopup",
      ["Z"] = "StashPopup",
      ["A"] = "CherryPickPopup",
      ["b"] = "BranchPopup",
      ["f"] = "FetchPopup",
      ["X"] = "ResetPopup",
      ["M"] = "RemotePopup",
      ["{"] = "GoToPreviousHunkHeader",
      ["}"] = "GoToNextHunkHeader",
    },
  },
}

Usage

You can either open Neogit by using the Neogit command:

:Neogit             " Open the status buffer in a new tab
:Neogit cwd=<cwd>   " Use a different repository path
:Neogit cwd=%:p:h   " Uses the repository of the current file
:Neogit kind=<kind> " Open specified popup directly
:Neogit commit      " Open commit popup

Or using the lua api:

local neogit = require('neogit')

-- open using defaults
neogit.open()

-- open commit popup
neogit.open({ "commit" })

-- open with split kind
neogit.open({ kind = "split" })

-- open home directory
neogit.open({ cwd = "~" })

The kind option can be one of the following values:

• tab (default)
• replace
• floating (EXPERIMENTAL! This currently doesn't work with popups. Very unstable)
• split
• split_above
• vsplit
• auto (vsplit if window would have 80 cols, otherwise split)

Buffers

Log Buffer

ll, lh, lo, ...

Shows a graph of the commit history. Hitting <cr> will open the Commit View for that commit.

The following popups are available from the log buffer, and will use the commit under the cursor, or selected, instead of prompting:

• Branch Popup
• Cherry Pick Popup
• Revert Popup
• Rebase Popup
• Commit Popup
• Reset Popup

Reflog Buffer

lr, lH, lO

Shows your reflog history. Hitting <cr> will open the Commit View for that commit.

The following popups are available from the reflog buffer, and will use the commit under the cursor, or selected, instead of prompting:

• Branch Popup
• Cherry Pick Popup
• Revert Popup
• Rebase Popup
• Commit Popup
• Reset Popup

Commit View

<cr> on a commit.

Shows details for a specific commit. The following popups are available from the commit buffer, using it's SHA instead of prompting:

• Branch Popup
• Cherry Pick Popup
• Revert Popup
• Rebase Popup
• Commit Popup
• Reset Popup

Status Buffer

A full list of status buffer commands can be found above under "configuration".

Fuzzy Finder

A full list of fuzzy-finder commands can be found above under "configuration". If nvim-telescope is installed, a custom finder will be used that allows for multi-select (in some places) and some other cool things. Otherwise, vim.ui.select will be used as a slightly less featurefull fallback.

Highlight Groups

See the built-in documentation for a comprehensive list of highlight groups. If your theme doesn't style a particular group, we'll try our best to do a nice job.

Events

Neogit emits the following events:

Event	Description
NeogitStatusRefreshed	Status has been reloaded
NeogitCommitComplete	Commit has been created
NeogitPushComplete	Push has completed
NeogitPullComplete	Pull has completed
NeogitFetchComplete	Fetch has completed

You can listen to the events using the following code:

autocmd User NeogitStatusRefreshed echo "Hello World!"

Or, if you prefer to configure autocommands via Lua:

local group = vim.api.nvim_create_augroup('MyCustomNeogitEvents', { clear = true })
vim.api.nvim_create_autocmd('User', {
  pattern = 'NeogitPushComplete',
  group = group,
  callback = require('neogit').close,
})

Refreshing Neogit

If you would like to refresh Neogit manually, you can use neogit#refresh_manually in Vimscript or require('neogit').refresh_manually in lua. They both require a single file parameter.

This allows you to refresh Neogit on your own custom events

augroup DefaultRefreshEvents
  au!
  au BufWritePost,BufEnter,FocusGained,ShellCmdPost,VimResume * call <SID>neogit#refresh_manually(expand('<afile>'))
augroup END

Testing

Run make test after checking out the repo. All dependencies should get automatically downloaded to /tmp/neogit-test/

See CONTRIBUTING.md for more details.