RoboCup Small Size League Shared Vision System

In the past, RoboCup Small Size League rules allowed every team to set up their own global vision system as a primary sensor. This option beared several organizational limitations and costs for the teams, thus impairing the league's progress. Additionally, most teams had converged on similar solutions and produced few significant research results to this global vision problem over the last years.

In 2009, the league committees decided to migrate to a shared vision system (including hardware) that could be used by all teams. This system - named SSL-Vision - is currently developed by volunteers from participating teams.

To find more in-depth and up-to-date information about SSL-Vision (including installation and configuration), please visit the Wiki Documentation Page.

Software Requirements

Following dependencies are required to build the software:

• g++
• QT >= 4.3 with opengl and networking support
• cmake
• Eigen3
• Google protocol buffers (protoc)
• OpenGL
• GLU
• libjpeg
• libpng
• OpenCV >= 3
• libdc1394 Version >= 2.0
• video for linux 2 (v4l)

To get all of these packages in (k)ubuntu, run the InstallPackagesUbuntu.sh script.

Or, in archlinux, run the InstallPackagesArch.sh script.

Supported cameras

Multiple cameras are supported:

• 1394B / Firewire 800 (backward compatible with 1394A)
• Basic usb camera support via the Video for Linux (V4L) drivers
• Matrix-Vision BlueFox (USB 2.0) and BlueFox3 (USB 3.0) cameras via mvIMPACT Acquire SDK
• Basler cameras via the Pylon Software Suite
• FLIR cameras via the SPINNAKER and FLYCAP SDK

To enable support for one or more of those cameras, install the corresponding SDK (linked above and described in more details below) first. Then build with the corresponding option:

• -DUSE_DC1394=true
• -DUSE_SPINNAKER=true
• -DUSE_mvIMPACT=true
• -DUSE_PYLON=true
• -DUSE_FLYCAP=true
• -DUSE_V4L=true

Example: cd build; cmake -DUSE_SPINNAKER=true ... As these are cached cmake option, you only need to run this once and can build with make afterwards.

Virtual Splitter cameras

In addition to the physical cameras, you can activate virtual cameras with -DUSE_SPLITTER=true. There will be an additional 'Distributor Thread' that captures from a single physical camera (or from file). The capture mode of the normal camera threads can be set to 'splitter'. That way, a part of the original image from the distributor thread is used as input. This may speedup processing time for cameras with large resolutions, but at the trait-of of multiple cameras with the same camera center, which may not work well with some consumers.

Matrix-Vision cameras

USB 2.0 BlueFox MLC and USB 3.0 BlueFox3-2 cameras are supported. Please note, that they require different SDKs. The SDK look very similar, but are not compatible. They get installed into the same directory by default.

Tested cameras:

• mvBlueFOX-MLC200wC
• mvBlueFOX3-2089

The SDK can be downloaded from the driver page. Go to Linux => mvBlueFOX (USB2.0) or mvBlueFOX3 (USB3.0). Download the install_mvBlueFOX.sh script and the correct .tgz file for your machine. Open a terminal and navigate to your download folder. For a quick installation run:

sh install_mvBlueFOX.sh -u

Basler cameras

Basler cameras are supported via the Pylon Software Suite. Installation instructions are contained in the download.

Tested with Basler ace acA1300-75gc.

FLIR cameras

USB 3.0 cameras are currently supported.

Tested cameras:

• Blackfly S (BFS-U3-51S5C-C)

Download and install the SDK and build ssl-vision with -DUSE_SPINNAKER=true.

Compilation

Build the code by running:

make

If you need to pass extra parameters to cmake, you need to run cmake directly:

cd build
cmake -DUSE_WHAT_SO_EVER=true ..
cd ..
make

The USE_* parameters are cached, so they do not have to be passed in each time.

Running

Depending on your OS, you might need to ensure that you have full access to the firewire devices /dev/fw*. This might require logging in as root or adding your user to a certain group.

Run the software using the following command:

./bin/vision

You can automatically start capturing with the -s option.

Starting to Capture and Setting Parameters

Once the software is running, you should see some empty capture frames on the right, and a data-tree structure on the left. In this data-structure you can setup your camera parameters, such as resolution, capture mode, etc.

A quick hint: The text-field below the data-tree allows for fast search through the data-tree.

See the section of DC1394 parameters below to get an idea of what the parameters do.

Once you have them set up, you can start capturing by clicking "Image Capture/Capture Control/Start" in the data-tree.

DC1394 Parameters

• If you expand the tree then the capture parameters are in "Image Capture/DC1394/Capture Settings"

• Furthermore, conversion settings are in "Image Capture/DC1394/Conversion Settings"

• "convert to mode" should currently be "yuv422" for best performance, "capture mode" should also be "yuv422", but can also be a different format such as "yuv411" or "rgb"

• Alternatively, if you desire, you can do de-bayering in software, but this will take extra CPU cycles. To do so, you would set the capture mode to e.g. "raw8" and the convert mode to "rgb". Finally, you will need to set "de-bayer" to true, and select the correct de-bayer pattern and desired method.

• Capturing supports both DCAM native modes and Format7 modes. This is selected in the "capture format" field. Leaving it on "auto" will attempt native mode first, then format7_0.

• By default, ISO800 support is disabled. To enable it, mark the field "use ISO800" as true.

ONLINE PARAMETERS

• Once you start capturing, you should see the realtime video image on the right. Furthermore, in the data tree, you should be able to go to the "Camera Parameters" node which will then be expandable and show all of your DCAM parameters.

• You can adjust all of these parameters in real-time.

• Note that the read-out of these parameters from the camera only happens automatically if "auto refresh params" in the Capture Control is set to true. Otherwise, you can use the "re-read params" "Refresh" button to refresh them manually. For performance reasons, it might make sense to set auto refresh to false, so the bus is not being flooded with too much control data and has full bandwidth available for the video streaming.

Storage of Settings and Parameters

• When you quit the application normally parameters will be saved automatically, but on a system crash, they won't. Make sure to regularly save the settings manually by click on the Save Settings button immediately under the main Vision System node.

• All settings will be automatically restored during the next program start.

• In case the files should ever become corrupted, or the program refuses to start completely when parsing the XML files (this should normally never occur) then simply delete all XML files and restart. The program will restore its default settings.