Here you will find my created SmartApps and Device Handlers as listed below.
Please note I acknowledge all original developers of updated Smart Apps & Device Handlers where appropriate
This is an updated version of ABC by Stephan Hackett (See original repository here).
- Added support for Philips Hue Dimmer
- Added option to control Color Temperature
- Code improvements
This is an updated version Hue Dimmer Switch by Stephen McLaughlin (See original repository here)
- Added support for Smart App button numbers (1,2,3,4)
- Added option to switch between button names or numbers
This is an updated version Zigbee Power Switch by SmartThings (See original repository here)
- Added support for Salus SP600 Smart Plug
It is based on code by @DroidSector & @ClassicGod and would not be possible without their work.
To pair your Aqara Cube Controller with SmartThings HUB follow the instructions outlined here: https://community.smartthings.com/t/xiaomi-zigbee-outlet-steps-to-pair-any-xiaomi-zigbee-device/67582
This DTH offers 3 modes of operation (that can be changed in the settings):
- Simple (set by default)- designed for backwards compatibility with previous DTH - presents only 7 buttons for basic gestures like shake, 90 degree flip, 180 degree flip, slide, knock, rotate right and rotate left.
- Advanced - presents 36 buttons for maximum functionality. Buttons are assigned as follows:
- buttons 1 to 6 - "push" event on face 0 to 5 activation (corresponds to face pointing up)
- buttons 7 to 12 - "push" event on slide gesture with faces 0 to 5 pointing up
- buttons 13 to 18 - "push" event on knock gesture with faces 0 to 5 pointing up
- buttons 19 to 24 - "push" event on right rotation with faces 0 to 5 pointing up
- buttons 25 to 30 - "push" event on left rotation with faces 0 to 5 pointing up
- buttons 31 to 36 - "push" event on shake gesture with faces 0 to 5 pointing up
- Combined - with this DTH will present 43 buttons assigned as follows:
- buttons 1 to 7 - basic actions just like in Simple mode
- buttons 8 to 43 - actions from Advanced mode moved by 7 positions.
I recommend using the Advanced mode
DTH also offers emulated "Three Axis" capability for easy usage in SmartApps like Mood Cube. It is dependent on selected face and affected by limitation mentioned below.
Due to limitations imposed by data sent by the hardware there are some things to keep in mind:
- The device sends orientation only on those gestures:
- 90 degree flip
- 180 degree flip
- slide
- knock
- Because of that orientation data for rotation and shake events is based on last know orientation.
- Device does not send any data if gesture is unrecognized - rotating the cube randomly in the air and placing it down will most likely not send any event.
- The DTH will correct last known orientation and send missing flip/face activation events if needed as soon as it's gets the orientation data form the device.
- Due to the above rotation and shake events can execute for wrong faces if the flip gestures are not performed correctly (like rotating the cube randomly in the air)