esphome-yeelight-ceiling-light

Esphome custom firmware for some Yeelight Ceiling Lights.

Requirements

• ESPHome 2021.10.0 or higher.
• TTL-to-USB module (FTDI/CH430/PL2303) and some wires to flash the device once

Supported devices

Name	Model	Model no.	Specs
Yeelight Ceiling Light YLXD76YL	yeelink.light.ceil26	YLXD76YL	AC220V, 23W, 1500lm, 2700K-6500K, 32cm
Yeelight XianYu C2001C550	yeelink.light.ceil26	C2001C550	AC220V, 50W, 2700K-6500K, 55.5cm
Yeelight XianYu C2001C450	yeelink.light.ceil26	C2001C450	AC220V, 50W, 2700K-6500K, 45.5cm
Yeelight XianYu C2001S500 (untested!)	yeelink.light.ceil26(?)	C2001S500	AC220V, 50W, 2700K-6500K, 50.5x50.5cm
Yeelight 1S YLDD05Y Lightstrip	yeelink.light.strip6	YLDD05Y	AC220V, 50W, RGB
Yeelight Meteorite Ceiling Light	yeelink.light.ceiling10	YLDL01YL	AC220V, 33W, 2700K-6500K, 7W RGB ambient light, 90x7x4 cm
Yeelight Ceiling Light YLXD42YL	yeelink.light.ceiling15	YLXD42YL	AC220V, 32W, 2200lm, 2700K-6500K, 48cm
Yeelight Ceiling Light YLXD41YL	yeelink.light.ceiling11	YLXD41YL	AC220V, 28W, 1800lm, 2700K-6500K, 32cm
Yeelight Staria Bedside LED	yeelink.light.lamp9	YLCT02YL	AC220V, 20W, 350lm, 2700K-6500K, without charger
Yeelight Staria Pro Bedside LED	yeelink.light.lampUNKNOWN	YLCT03YL	AC220V, 20W, 350lm, 2700K-6500K, Qi charger
Mi Smart LED Ceiling Light	yeelink.light.ceiling22	MJXDD001 / MJXDD01SYL	AC220V, 45W, 3100lm, 2700K-6000K, 45cm
Yeelight Ceiling Light YLXD50YL	yeelink.light.ceiling20	YLXD50YL	AC220V, 50W, 3100lm, 2700K-6500K, RGB ambient light, 47cm
Yeelight Arwen 450C	yeelight.light.ceilc	YLXD013-B	AC220V, 50W, 4000lm, 2700K-6500K, RGB ambient light, 50cm
Yeelight Arwen 450S	yeelight.light.ceilc	YLXD013	AC220V, 50W, 3000lm, 2700K-6500K, RGB ambient light, 45cm
Yeelight Arwen 550C	yeelight.light.ceilc	YLXD013-C	AC220V, 50W, 4500lm, 2700K-6500K, RGB ambient light, 60cm
Yeelight Arwen 550S	yeelight.light.ceilb	YLXD013-A	AC220V, 50W, 3500lm, 2700K-6500K, RGB ambient light, 55cm
Yeelight Arwen A2001 450	yeelight.light.ceil29	YLXD032	AC220V, 50W, 4500lm, 2700K-6500K, 50cm
Yeelight Arwen A2001 550	yeelight.light.ceil29	YLXD031	AC220V, 50W, 4800lm, 2700K-6500K, 60cm
Yeelight Ceiling Light 235C	yeelight.light.ceil20	YLXDD-0030	AC220V, 18W, 1200lm, 2700K-6500K, RGB ambient light
Yeelight Ceiling Light 300C	yeelight.light.ceil20	YLXDD-0033	AC220V, 21W, 1600lm, 2700K-6500K, RGB ambient light
Yeelight Ceiling Light 400C	yeelight.light.ceil20	YLXDD-0034	AC220V, 24W, 2000lm, 2700K-6500K, RGB ambient light

More esphome + yeelight projects

• Yeelight LED Screen Light Bar (YLTD001)
• Yeelight Ceiling Light YLXD41YL
• Xiaomi Mi Desk Lamp 1S (ESP32 based)
• Xiaomi Mi Desk Lamp (MJTD01YL, ESP8266 based)
• Xiaomi Philips Light
• Xiaomi Mijia Bedside Lamp 2
• How to flash a Yeelight 1S YLDD05Y Lightstrip

Features

yeelink.light.ceil26, yeelink.light.ceiling22

• Light (CCWW)
  • Brightness
  • Color temperature (2700K-6500K)
• Nightlight (2700K)
  • Brightness
• Sensor
  • Power supply voltage (ESP32 VCC)

yeelink.light.ceiling10, yeelink.light.ceiling20, yeelight.light.ceilb, yeelight.light.ceilc

• Light (CCWW)
  • Brightness
  • Color temperature (2700K-6500K)
• Nightlight (2700K)
  • Brightness
• Ambient light (RGB)
  • Brightness
  • Color
• Sensor
  • ADC1
  • ADC2

yeelight.light.ceil29

• Light (CCWW)
  • Brightness
  • Color temperature (2700K-6500K)
• Nightlight (2700K)
  • Brightness
• Sensor
  • ADC1
  • ADC2

yeelink.light.ceiling15, yeelink.light.ceiling11

• Light (CCWW)
  • Brightness
  • Color temperature (2700K-6500K)
• Nightlight (2700K)
  • Brightness
• Sensor
  • ADC1
  • ADC2

yeelink.light.lamp9, yeelink.light.lampX

• Power button
• Light (CCWW)
  • Brightness
  • Color temperature (2700K-6500K)
• Nightlight (2700K)
  • Brightness

yeelink.light.strip6

• Light strip (RGB)
  • Brightness
  • Color

Known bugs

Bootloop when BLE Tracker configured. Luckily ESPHome goes into safe mode after 10 unsuccessful boot attempts by default. So the device can be flashed OTA nevertheless.

Bootlog

[11:59:23]ets Jun  8 2016 00:22:57
[11:59:23]
[11:59:23]rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
[11:59:23]configsip: 0, SPIWP:0xee
[11:59:23]clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
[11:59:23]mode:DIO, clock div:2
[11:59:23]load:0x3fff0018,len:4
[11:59:23]load:0x3fff001c,len:1044
[11:59:23]load:0x40078000,len:8896
[11:59:23]load:0x40080400,len:5828
[11:59:23]entry 0x400806ac
[11:59:23][I][logger:166]: Log initialized
[11:59:23][C][ota:366]: There have been 8 suspected unsuccessful boot attempts.
[11:59:23][I][app:029]: Running through setup()...
[11:59:23][C][power_supply:010]: Setting up Power Supply...
[11:59:23][C][light:097]: Setting up light 'unused_yeelight night light'...
[11:59:23][D][light:265]: 'unused_yeelight night light' Setting:
[11:59:23][D][light:278]:   Brightness: 100%
[11:59:23][C][light:097]: Setting up light 'unused_yeelight ceiling light'...
[11:59:23][D][light:265]: 'unused_yeelight ceiling light' Setting:
[11:59:23][D][light:278]:   Brightness: 100%
[11:59:23][D][light:282]:   Color Temperature: 1.0 mireds
[11:59:23][D][light:287]:   Red=100%, Green=100%, Blue=100%
[11:59:24][D][esp32_ble_tracker:148]: Starting scan...
[11:59:24][D][binary_sensor:034]: 'unused_yeelight Status': Sending initial state OFF
[11:59:24][C][adc:018]: Setting up ADC 'unused_yeelight power supply'...
[11:59:24][D][text_sensor:015]: 'unused_yeelight Esphome Version': Sending state '1.15.3 Feb 25 2021, 11:57:31'
[11:59:24][C][wifi:033]: Setting up WiFi...
[11:59:24][I][wifi:194]: WiFi Connecting to 'xxxxxxxx'...
[11:59:24][D][sensor:092]: 'unused_yeelight Uptime': Sending state 0.00001 days with 0 decimals of accuracy
[11:59:24][D][adc:056]: 'unused_yeelight power supply': Got voltage=3.90V
[11:59:24][D][sensor:092]: 'unused_yeelight power supply': Sending state 3.90000 V with 2 decimals of accuracy
[11:59:24][D][esp32_ble_tracker:544]: Found device 50:XX:XX:XX:XX:XX RSSI=-62
[11:59:24][D][esp32_ble_tracker:565]:   Address Type: PUBLIC
[11:59:24][D][esp32_ble_tracker:544]: Found device 49:XX:XX:XX:XX:XX RSSI=-91
[11:59:24][D][esp32_ble_tracker:565]:   Address Type: RANDOM
[11:59:29]E (6637) task_wdt: Task watchdog got triggered. The following tasks did not reset the watchdog in time:
[11:59:29]E (6637) task_wdt:  - IDLE0 (CPU 0)
[11:59:29]E (6637) task_wdt: Tasks currently running:
[11:59:29]E (6637) task_wdt: CPU 0: loopTask
[11:59:29]E (6637) task_wdt: Aborting.
[11:59:29]abort() was called at PC 0x400ea723 on core 0
[11:59:29]
[11:59:29]Backtrace: 0x40091698:0x3ffbe520 0x400918a9:0x3ffbe540 0x400ea723:0x3ffbe560 0x4008494e:0x3ffbe580 0x4000bfed:0x3ffcdb20 0x4008f135:0x3ffcdb30 0x4008e28f:0x3ffcdb50 0x400d8df1:0x3ffcdb90 0x401df9c9:0x3ffcdc30 0x401dfa95:0x3ffcdc50 0x400e0959:0x3ffcdc70 0x400e3632:0x3ffcdcc0 0x400e8973:0x3ffcdf50 0x4008e535:0x3ffcdf70
WARNING Found stack trace! Trying to decode it
WARNING Decoded 0x40091698: invoke_abort at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/esp32/panic.c:707
WARNING Decoded 0x400918a9: abort at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/esp32/panic.c:707
WARNING Decoded 0x400ea723: task_wdt_isr at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/esp32/task_wdt.c:252
WARNING Decoded 0x4008494e: _xt_lowint1 at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/freertos/xtensa_vectors.S:1154
WARNING Decoded 0x4008f135: vTaskExitCritical at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/freertos/tasks.c:3507
WARNING Decoded 0x4008e28f: xQueueGenericReceive at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/freertos/queue.c:2520
WARNING Decoded 0x400d8df1: esphome::esp32_ble_tracker::ESP32BLETracker::loop() at /home/sebastian/esphome/unused_yeelight/src/esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp:241
WARNING Decoded 0x401df9c9: esphome::Component::call_loop() at /home/sebastian/esphome/unused_yeelight/src/esphome/core/component.cpp:111
WARNING Decoded 0x401dfa95: esphome::Component::call() at /home/sebastian/esphome/unused_yeelight/src/esphome/core/component.cpp:111
WARNING Decoded 0x400e0959: esphome::Application::setup() at /home/sebastian/esphome/unused_yeelight/src/esphome/core/application.cpp:50 (discriminator 2)
WARNING Decoded 0x400e3632: setup() at /home/sebastian/esphome/unused_yeelight/src/main.cpp:360
WARNING Decoded 0x400e8973: loopTask(void*) at /home/sebastian/.platformio/packages/framework-arduinoespressif32@src-ff59aeb8b43c3669326fe991d70309ba/cores/esp32/main.cpp:14
WARNING Decoded 0x4008e535: vPortTaskWrapper at /home/paul/src/esp32-arduino-lib-builder/esp-idf/components/freertos/port.c:403
[11:59:29]
[11:59:29]Rebooting...

GPIOs

yeelink.light.ceil26

Name	Label	ESP32 GPIO	Stock firmware limits
Warm white PWM	W	GPIO19	0.4V - 1.5V
Cold white PWM	C	GPIO21	0.5V - 3.0V
Night light PWM	NL	GPIO23
Power supply GPIO	STB	GPIO23
VCC measurement	ADC1	GPIO35
TXD	TP5	GPIO1
RXD	TP4	GPIO3
GPIO0	TP3	GPIO0
GND	TP2	PIN1
3V3	TP1	PIN2

# Pinout of the pin header at the bottom of the LED driver board

   CW -->o o<-- WW
  3V3 -->o o<-- NC
  GND -->o o<-- NC
  STB -->o o<-- NC
 ADC1 -->o o<-- NL

Please use 3V3 and GND of the pin header to power the daugther board / the ESP32 if you flash the ESP32 the first time. The ESP32 will enter the serial bootloader when GPIO0 (test point TP3) is held low (GND) on reset / power.

yeelink.light.ceiling10

Name	Label	ESP32 GPIO	Stock firmware limits
Warm white PWM	W	GPIO19	0.42V - 2.55V
Cold white PWM	C	GPIO21	0.41V - 2.51V
Night light PWM	NL	GPIO23	N/A
Red PWM	R	GPIO33
Green PWM	G	GPIO26
Blue PWM	B	GPIO27
Power supply GPIO	ON/OFF	GPIO22	3.08V / 0V
TXD	TX	GPIO1
RXD	RX	GPIO3
GPIO0	IO0	GPIO0

The ESP32 will enter the serial bootloader when GPIO0 (test point IO0 at the back) is held low (GND) on reset / power.

yeelink.light.ceiling11

see Yeelight Ceiling Light YLXD41YL The ESP32 will enter the serial bootloader when GPIO0 (test point IO0 at the back) is held low (GND) on reset / power.

yeelink.light.ceiling15

Name	Label	ESP32 GPIO	Stock firmware limits
Warm white PWM	W	GPIO19	0.67V - 3.08V
Cold white PWM	C	GPIO21	0.67V - 3.08V
Night light PWM	NL	GPIO23	0.06V - 3.0V
VCC measurement	ADC1	GPIO36	2.0V
VCC measurement	ADC2	GPIO32	1.76V
TXD		GPIO1
RXD		GPIO3
GPIO0	TP1	GPIO0

The ESP32 will enter the serial bootloader when GPIO0 (test point TP1 at the back) is held low (GND) on reset / power.

  ADC1 NL  WW GND           O  -- GND
   |   |   |   |            O  -- TXD
   8   6   4   2            O  -- RXD
   |   |   |   |           [O] -- 3V3
   o   o   o   o

   o   o   o   o
   |   |   |   |
   7   5   3   1
   |   |   |   |
  3V3 ADC2 CW GND

yeelink.light.ceiling22

Name	Label	ESP32 GPIO	Stock firmware limits
Warm white PWM	W	GPIO19	14% - 50% duty cycle
Cold white PWM	C	GPIO21	20% - 88% duty cycle
Night light PWM	NL	GPIO23	10% - 100% duty cycle
VCC measurement	ADC1	GPIO36
Power supply GPIO	STA	GPIO22	3.3V / 0V
3.3V	TP1
GND	TP2
GPIO0	TP3	GPIO0
TXD	TP4	GPIO1
RXD	TP5	GPIO3

The ESP32 will enter the serial bootloader when GPIO0 (test point TP3 at the back) is held low (GND) on reset / power.

yeelink.light.ceiling20

Name	Label	ESP32 GPIO	Stock firmware limits
3.3V	3.3	3.3V
GND	GND	GND
Red PWM	R	GPIO33
Green PWM	G	GPIO26
Blue PWM	B	GPIO27
Night Light PWM	NC	GPIO23
Power supply GPIO	STA	GPIO22	3.3V / 0V
Cold white PWM	C	GPIO21	3.16V
Warm white PWM	W	GPIO19	1.58V
TXD	TP5	GPIO1
RXD	TP4	GPIO3
GPIO0	TP3	GPIO0

The ESP32 will enter the serial bootloader when GPIO0 (test point IO0 at the back) is held low (GND) on reset / power.

yeelink.light.lamp9, yeelink.light.lampUNKNOWN

Name	Label	ESP32 GPIO	Stock firmware limits
Warm white PWM		GPIO2	0.226V - 3.28V
Cold white PWM		GPIO27	0.194V - 3.28V
Night light PWM		GPIO12	0.197V - 3.27V
Power supply GPIO		GPIO4
Button		GPIO14
TXD	TX, TP9	GPIO1
RXD	RX, TP10	GPIO3
GPIO0	TP next to C37	GPIO0
SCL (I2C)		GPIO18
SDA (I2C)		GPIO17
LED (YLCT03YL only)		GPIO33
3.3V	+, TP7	3.3V
GND	-, TP8	GND

Disassembly

YLXD76YL

YLXD41YL

C2001C550

Remove the single safety screw on the back and rotate the cover counterclockwise.

YLDL01YL

The grey plastic frame can easily be removed with a credit card between the outer white body and the grey frame. It is just clipped into place. Kudos to @fhloston.

References, sources & inspiration:

• https://templates.blakadder.com/yeelight_YLDL01YL.html
• https://photos.app.goo.gl/T3F4aaXuYgvFXRmi7
• arendst/Tasmota#10762

YLXD42YL

Rotate the cover counterclockwise.

YLCT02YL

Remove the 4 screws under the foot. The lower shell is held by 8 clips and can be separated with a plastic card and some force.

YLXD50YL

Remove the cover counterclockwise, disconnect from the AC (be safe!), pull out the RGB - C - W connectors (mark one of the last two). Unscrew the 2 screws from the base, and you can remove the controller box. Pick a flat screwdriver/plastic card and remove the plastic base from the box. Sometimes its harder, because the thermalpad. Pull out the PCB from the box, and you can remove the ESP module. Maybe some cleaning required from the glue. The test points are in the back of the ESP's PCB.

MJXDD01SYL

The disassembly process is almost, if not exactly the same, as with YLXD50YL. MJXDD01SYL seems a re-labled YLXD50YL.

Rotate the cover counterclockwise to remove the cover. Now you can see the outside of the board's housing. Unscrew the screws and unplug the two connectors. Now you can detach the housing from the base. On the back of the housing you need to remove the cover. Now you can take out the PCB from the housing. Unplug the ESP32 from the socket. Maybe you need to remove a bit of the glue between the PCM and the ESP32.

The Test Points (TP) are on the back side of the ESP32 module. The font is very small, maybe you need a magnifying glass.

To solder some wires to the TPs you need a bit of experience. Since other components are located very close to the TPs.

YLXDD-0033

To disasemble the unit, use a prying tool to un-clip the top part. There are no screws nor glue, only clips all around the ceiling light.

When flashing the YLXDD-00xx series you'll need an external 3.3V power supply and pull the enable (EN) pin to 3.3V.