[SM64] Animations Rewrite/Rework

__init__.py

@@ -13,7 +13,7 @@
  repo_settings_operators_unregister,
 )
 
-from .fast64_internal.sm64 import sm64_register, sm64_unregister
+from .fast64_internal.sm64 import sm64_register, sm64_unregister, SM64_ActionProperty
 from .fast64_internal.sm64.sm64_constants import sm64_world_defaults
 from .fast64_internal.sm64.settings.properties import SM64_Properties
 from .fast64_internal.sm64.sm64_geolayout_bone import SM64_BoneProperties
@@ -227,6 +227,14 @@ class Fast64_Properties(bpy.types.PropertyGroup):
  renderSettings: bpy.props.PointerProperty(type=Fast64RenderSettings_Properties, name="Fast64 Render Settings")
 
 
+class Fast64_ActionProperties(bpy.types.PropertyGroup):
+ """
+ Properties in Action.fast64.
+ """
+
+ sm64: bpy.props.PointerProperty(type=SM64_ActionProperty, name="SM64 Properties")
+
+
 class Fast64_BoneProperties(bpy.types.PropertyGroup):
  """
  Properties in bone.fast64 (bpy.types.Bone)
@@ -314,6 +322,7 @@ def draw(self, context):
  Fast64RenderSettings_Properties,
  ManualUpdatePreviewOperator,
  Fast64_Properties,
+ Fast64_ActionProperties,
  Fast64_BoneProperties,
  Fast64_ObjectProperties,
  F3D_GlobalSettingsPanel,
@@ -457,7 +466,7 @@ def register():
  bpy.types.Scene.fast64 = bpy.props.PointerProperty(type=Fast64_Properties, name="Fast64 Properties")
  bpy.types.Bone.fast64 = bpy.props.PointerProperty(type=Fast64_BoneProperties, name="Fast64 Bone Properties")
  bpy.types.Object.fast64 = bpy.props.PointerProperty(type=Fast64_ObjectProperties, name="Fast64 Object Properties")
-
+ bpy.types.Action.fast64 = bpy.props.PointerProperty(type=Fast64_ActionProperties, name="Fast64 Action Properties")
  bpy.app.handlers.load_post.append(after_load)
 
 
@@ -486,6 +495,7 @@ def unregister():
  del bpy.types.Scene.fast64
  del bpy.types.Bone.fast64
  del bpy.types.Object.fast64
+ del bpy.types.Action.fast64
 
  repo_settings_operators_unregister()
 

fast64_internal/operators.py

@@ -1,8 +1,20 @@
-import bpy, mathutils, math
-from bpy.types import Operator, Context, UILayout
+from cProfile import Profile
+from pstats import SortKey, Stats
+from typing import Optional
+
+import bpy, mathutils
+from bpy.types import Operator, Context, UILayout, EnumProperty
 from bpy.utils import register_class, unregister_class
-from .utility import *
-from .f3d.f3d_material import *
+
+from .utility import (
+ cleanupTempMeshes,
+ get_mode_set_from_context_mode,
+ raisePluginError,
+ parentObject,
+ store_original_meshes,
+ store_original_mtx,
+)
+from .f3d.f3d_material import createF3DMat
 
 
 def addMaterialByName(obj, matName, preset):
@@ -14,20 +26,29 @@ def addMaterialByName(obj, matName, preset):
  material.name = matName
 
 
+PROFILE_ENABLED = False
+
+
 class OperatorBase(Operator):
  """Base class for operators, keeps track of context mode and sets it back after running
  execute_operator() and catches exceptions for raisePluginError()"""
 
  context_mode: str = ""
  icon = "NONE"
 
+ @classmethod
+ def is_enabled(cls, context: Context, **op_values):
+ return True
+
  @classmethod
  def draw_props(cls, layout: UILayout, icon="", text: Optional[str] = None, **op_values):
  """Op args are passed to the operator via setattr()"""
  icon = icon if icon else cls.icon
+ layout = layout.column()
  op = layout.operator(cls.bl_idname, icon=icon, text=text)
  for key, value in op_values.items():
  setattr(op, key, value)
+ layout.enabled = cls.is_enabled(bpy.context, **op_values)
  return op
 
  def execute_operator(self, context: Context):
@@ -40,7 +61,12 @@ def execute(self, context: Context):
  try:
  if self.context_mode and self.context_mode != starting_mode_set:
  bpy.ops.object.mode_set(mode=self.context_mode)
- self.execute_operator(context)
+ if PROFILE_ENABLED:
+ with Profile() as profile:
+ self.execute_operator(context)
+ print(Stats(profile).strip_dirs().sort_stats(SortKey.CUMULATIVE).print_stats())
+ else:
+ self.execute_operator(context)
  return {"FINISHED"}
  except Exception as exc:
  raisePluginError(self, exc)
@@ -53,6 +79,34 @@ def execute(self, context: Context):
  bpy.ops.object.mode_set(mode=starting_mode_set)
 
 
+class SearchEnumOperatorBase(OperatorBase):
+ bl_description = "Search Enum"
+ bl_label = "Search"
+ bl_property = None
+ bl_options = {"UNDO"}
+
+ @classmethod
+ def draw_props(cls, layout: UILayout, data, prop: str, name: str):
+ row = layout.row()
+ if name:
+ row.label(text=name)
+ row.prop(data, prop, text="")
+ row.operator(cls.bl_idname, icon="VIEWZOOM", text="")
+
+ def update_enum(self, context: Context):
+ raise NotImplementedError()
+
+ def execute_operator(self, context: Context):
+ assert self.bl_property
+ self.report({"INFO"}, f"Selected: {getattr(self, self.bl_property)}")
+ self.update_enum(context)
+ context.region.tag_redraw()
+
+ def invoke(self, context: Context, _):
+ context.window_manager.invoke_search_popup(self)
+ return {"RUNNING_MODAL"}
+
+
 class AddWaterBox(OperatorBase):
  bl_idname = "object.add_water_box"
  bl_label = "Add Water Box"

fast64_internal/sm64/README.md

@@ -52,38 +52,7 @@ For example, for Mario you would rotate the four limb joints around the Y-axis 1
 
 Then after applying the rest pose and skinning, you would apply those operations in reverse order then apply rest pose again.
 
-### Importing/Exporting Binary SM64 Animations (Not Mario)
-- Note: SM64 animations only allow for rotations, and translation only on the root bone.
-
-- Download Quad64, open the desired level, and go to Misc -> Script Dumps.
-- Go to the objects header, find the object you want, and view the Behaviour Script tab.
-- For most models with animation, you can will see a 27 command, and optionally a 28 command.
-
-For importing:
-
-- The last 4 bytes of the 27 command will be the animation list pointer.
- - Make sure 'Is DMA Animation' is unchecked, 'Is Anim List' is checked, and 'Is Segmented Pointer' is checked. 
- - Set the animation importer start address as those 4 bytes.
- - If a 28 command exists, then the second byte will be the anim list index.
- - Otherwise, the anim list index is usually 0.
-
-For exporting:
-
-- Make sure 'Set Anim List Entry' is checked.
-- Copy the addresses of the 27 command, which is the first number before the slash on that line.
-- Optionally do the same for the 28 command, which may not exist.
-- If a 28 command exists, then the second byte will be the anim list index.
-- Otherwise, the anim list index is usually 0.
-
-Select an armature for the animation, and press 'Import/Export animation'.
-
-### Importing/Exporting Binary Mario Animations
-Mario animations use a DMA table, which contains 8 byte entries of (offset from table start, animation size). Documentation about this table is here:
-https://dudaw.webs.com/sm64docs/sm64_marios_animation_table.txt
-Basically, Mario's DMA table starts at 0x4EC000. There is an 8 byte header, and then the animation entries afterward. Thus the 'climb up ledge' DMA entry is at 0x4EC008. The first 4 bytes at that address indicate the offset from 0x4EC000 at which the actual animation exists. Thus the 'climb up ledge' animation entry address is at 0x4EC690. Using this table you can find animations you want to overwrite. Make sure the 'Is DMA Animation' option is checked and 'Is Segmented Pointer' is unchecked when importing/exporting. Check "Overwrite DMA Entry", set the start address to 4EC000 (for Mario), and set the entry address to the DMA entry obtained previously.
-
-### Animating Existing Geolayouts
-Often times it is hard to rig an existing SM64 geolayout, as there are many intermediate non-deform bones and bones don't point to their children. To make this easier you can use the 'Create Animatable Metarig' operator in the SM64 Armature Tools header. This will generate a metarig which can be used with IK. The metarig bones will be placed on armature layers 3 and 4.
+### TODO: Link to animations docs
 
 ## Decomp
 To start, set your base decomp folder in SM64 General Settings. This allows the plugin to automatically add headers/includes to the correct locations. You can always choose to export to a custom location, although headers/includes won't be written.
@@ -165,6 +134,8 @@ Insertable Binary exporting will generate a binary file, with a header containin
  1 = Geolayout
  2 = Animation
  3 = Collision
+ 4 = Animation Table
+ 5 = Animation DMA Table
 
  0x04-0x08 : Data Size (size in bytes of Data Section)
  0x08-0x0C : Start Address (start address of data, relative to start of Data Section)

fast64_internal/sm64/__init__.py

@@ -1,3 +1,7 @@
+from bpy.types import PropertyGroup
+from bpy.props import PointerProperty
+from bpy.utils import register_class, unregister_class
+
 from .settings import (
  settings_props_register,
  settings_props_unregister,
@@ -83,14 +87,23 @@
  sm64_dl_writer_unregister,
 )
 
-from .sm64_anim import (
- sm64_anim_panel_register,
- sm64_anim_panel_unregister,
- sm64_anim_register,
- sm64_anim_unregister,
+from .animation import (
+ anim_panel_register,
+ anim_panel_unregister,
+ anim_register,
+ anim_unregister,
+ SM64_ActionAnimProperty,
 )
 
 
+class SM64_ActionProperty(PropertyGroup):
+ """
+ Properties in Action.fast64.sm64.
+ """
+
+ animation: PointerProperty(type=SM64_ActionAnimProperty, name="SM64 Properties")
+
+
 def sm64_panel_register():
  settings_panels_register()
  tools_panels_register()
@@ -103,7 +116,7 @@ def sm64_panel_register():
  sm64_spline_panel_register()
  sm64_dl_writer_panel_register()
  sm64_dl_parser_panel_register()
- sm64_anim_panel_register()
+ anim_panel_register()
 
 
 def sm64_panel_unregister():
@@ -118,12 +131,13 @@ def sm64_panel_unregister():
  sm64_spline_panel_unregister()
  sm64_dl_writer_panel_unregister()
  sm64_dl_parser_panel_unregister()
- sm64_anim_panel_unregister()
+ anim_panel_unregister()
 
 
 def sm64_register(register_panels: bool):
  tools_operators_register()
  tools_props_register()
+ anim_register()
  sm64_col_register()
  sm64_bone_register()
  sm64_cam_register()
@@ -134,8 +148,8 @@ def sm64_register(register_panels: bool):
  sm64_spline_register()
  sm64_dl_writer_register()
  sm64_dl_parser_register()
- sm64_anim_register()
  settings_props_register()
+ register_class(SM64_ActionProperty)
 
  if register_panels:
  sm64_panel_register()
@@ -144,6 +158,7 @@ def sm64_register(register_panels: bool):
 def sm64_unregister(unregister_panels: bool):
  tools_operators_unregister()
  tools_props_unregister()
+ anim_unregister()
  sm64_col_unregister()
  sm64_bone_unregister()
  sm64_cam_unregister()
@@ -154,8 +169,8 @@ def sm64_unregister(unregister_panels: bool):
  sm64_spline_unregister()
  sm64_dl_writer_unregister()
  sm64_dl_parser_unregister()
- sm64_anim_unregister()
  settings_props_unregister()
+ unregister_class(SM64_ActionProperty)
 
  if unregister_panels:
  sm64_panel_unregister()

fast64_internal/sm64/animation/__init__.py

@@ -0,0 +1,15 @@
+from .operators import anim_ops_register, anim_ops_unregister
+from .properties import anim_props_register, anim_props_unregister, SM64_ArmatureAnimProperties, SM64_ActionAnimProperty
+from .panels import anim_panel_register, anim_panel_unregister
+from .exporting import export_animation, export_animation_table
+from .utility import get_anim_obj, is_obj_animatable
+
+
+def anim_register():
+ anim_ops_register()
+ anim_props_register()
+
+
+def anim_unregister():
+ anim_ops_unregister()
+ anim_props_unregister()