An-24B for FlightGear flight simulator
Credits: FDM and systems, programming - Michael Soitanen ([email protected]) 3D model and textures, systems and programming - Adrian aka Maerchenprinz ASI - helijah Artwork - Orvil Some 3D instruments were taken from Tu-154B-2 by Yurik and Yak-40 by Specter.
================================= QUICK IMPORTANT INSTRUMENTS GUIDE (look at QuickStartUpGuide.pdf too)
- Anti-Ice System
- On F/O's right console: PPD pitot and static port heating; up position: ON; middle: OFF; down: control
- Left switch: Pitot A1 (pilot's KUS-730) and static ports S1 and S5 (pilot's KUS-730, VAR-30 and UVO-15)
- Middle switch: Pitot A2 (FDR and emergency pitot for A1) and static port S3 (FDR)
- Right switch: Pitot A3 (F/O's KUS-730) and static ports S2 and S6 (F/O's KUS-730, VAR-30 and UVID-15 and UVPD-15)
- Upper switch: Static ports S4 and S7 (altitude correction KV-11)
- At bottom of F/O's right panel:
- 2x right window (low and intense); astrocompass*; wing, tail and nose; prop hub and blades
- At bottom of pilot's left panel:
- 2x right window (low and intense)
- On F/O's right console: PPD pitot and static port heating; up position: ON; middle: OFF; down: control
- not on this plane!
- Pitot and Static Port Pressure valves
- On pilot's left console:
- Back one: A1 -> A2*
- Front one: S1 and S5* -> E1 (emergency port in radar chamber)
- On F/O's right console (one red lever):
- S2 and S6* -> E2 (emergency port in radar chamber)
- On pilot's left console:
- also see "Anti-Ice System"