Skip to content

Fix 1954

Fix 1954 #7980

Workflow file for this run

name: build-windows
on: [push, pull_request]
jobs:
fast_build_release:
runs-on: windows-2019
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=ON -DCMAKE_BUILD_TYPE=Release
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Release --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --timeout 300 --output-on-failure -C Release
- name: Configure CMake All
shell: bash
working-directory: ${{runner.workspace}}/build
run: cmake $GITHUB_WORKSPACE -DALL_TESTS=ON
fast_build_release_all_tests:
runs-on: windows-2019
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake All
shell: bash
working-directory: ${{runner.workspace}}/build
run: cmake $GITHUB_WORKSPACE -DALL_TESTS=ON
- name: Build All
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: |
cmake --build . --parallel --config Release
- name: Test All
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --parallel --timeout 300 --output-on-failure -C Release
- name: Install
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --install .
windows_release_fb_off:
runs-on: windows-2019
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Release --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --timeout 10000 --output-on-failure -C Release
fast_build_debug:
runs-on: windows-latest
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=ON -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Debug --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --output-on-failure -C Debug
fast_build_debug_all_tests:
runs-on: windows-latest
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DALL_TESTS=ON -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Debug --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --output-on-failure -C Debug
windows_debug_fb_off:
runs-on: windows-latest
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake All
shell: bash
working-directory: ${{runner.workspace}}/build
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=OFF
- name: Build All
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: |
cmake --build . --parallel --config Debug
- name: Test All
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --parallel --timeout 300 --output-on-failure -C Debug
windows_release64:
runs-on: windows-2019
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Release --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --timeout 300 --output-on-failure -C Release
windows_release64_all_tests:
runs-on: windows-2019
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON -DALL_TESTS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Release --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --timeout 300 --output-on-failure -C Release
windows_release64_fb_off:
runs-on: windows-2019
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Release --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --timeout 300 --output-on-failure -C Release
windows_debug64:
runs-on: windows-latest
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Debug --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --output-on-failure -C Debug
windows_debug64_all_tests:
runs-on: windows-latest
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DALL_TESTS=ON -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Debug --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --output-on-failure -C Debug
windows_debug64_fb_off:
runs-on: windows-latest
steps:
- uses: actions/checkout@v4
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config Debug --parallel
- name: Test
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute tests defined by the CMake configuration.
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
run: ctest --output-on-failure -C Debug