Added some sanity checks to Highs::writeLocalModel
to prevent segfaults if called directly by a user
#7909
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
name: build-windows | |
on: [push, pull_request] | |
jobs: | |
fast_build_release: | |
runs-on: windows-2019 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=ON -DCMAKE_BUILD_TYPE=Release | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Release --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --timeout 300 --output-on-failure -C Release | |
- name: Configure CMake All | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
run: cmake $GITHUB_WORKSPACE -DALL_TESTS=ON | |
fast_build_release_all_tests: | |
runs-on: windows-2019 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake All | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
run: cmake $GITHUB_WORKSPACE -DALL_TESTS=ON | |
- name: Build All | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: | | |
cmake --build . --parallel --config Release | |
- name: Test All | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --parallel --timeout 300 --output-on-failure -C Release | |
- name: Install | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --install . | |
windows_release_fb_off: | |
runs-on: windows-2019 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Release --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --timeout 10000 --output-on-failure -C Release | |
fast_build_debug: | |
runs-on: windows-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=ON -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Debug --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --output-on-failure -C Debug | |
fast_build_debug_all_tests: | |
runs-on: windows-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DALL_TESTS=ON -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Debug --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --output-on-failure -C Debug | |
windows_debug_fb_off: | |
runs-on: windows-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake All | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=OFF | |
- name: Build All | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: | | |
cmake --build . --parallel --config Debug | |
- name: Test All | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --parallel --timeout 300 --output-on-failure -C Debug | |
windows_release64: | |
runs-on: windows-2019 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Release --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --timeout 300 --output-on-failure -C Release | |
windows_release64_all_tests: | |
runs-on: windows-2019 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON -DALL_TESTS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Release --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --timeout 300 --output-on-failure -C Release | |
windows_release64_fb_off: | |
runs-on: windows-2019 | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Release --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --timeout 300 --output-on-failure -C Release | |
windows_debug64: | |
runs-on: windows-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Debug --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --output-on-failure -C Debug | |
windows_debug64_all_tests: | |
runs-on: windows-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DALL_TESTS=ON -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Debug --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --output-on-failure -C Debug | |
windows_debug64_fb_off: | |
runs-on: windows-latest | |
steps: | |
- uses: actions/checkout@v4 | |
- name: Create Build Environment | |
# Some projects don't allow in-source building, so create a separate build directory | |
# We'll use this as our working directory for all subsequent commands | |
run: cmake -E make_directory ${{runner.workspace}}/build | |
- name: Configure CMake | |
# Use a bash shell so we can use the same syntax for environment variable | |
# access regardless of the host operating system | |
shell: bash | |
working-directory: ${{runner.workspace}}/build | |
# Note the current convention is to use the -S and -B options here to specify source | |
# and build directories, but this is only available with CMake 3.13 and higher. | |
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12 | |
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON | |
- name: Build | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute the build. You can specify a specific target with "--target <NAME>" | |
run: cmake --build . --config Debug --parallel | |
- name: Test | |
working-directory: ${{runner.workspace}}/build | |
shell: bash | |
# Execute tests defined by the CMake configuration. | |
# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail | |
run: ctest --output-on-failure -C Debug |