EESSI · bedroge · Nov 25, 2023 · Nov 25, 2023 · Nov 25, 2023 · Nov 25, 2023
diff --git a/.github/workflows/tests_scripts.yml b/.github/workflows/tests_scripts.yml
@@ -5,7 +5,7 @@ on:
     paths:
       - build_container.sh
       - create_directory_tarballs.sh
-      - EESSI-pilot-install-software.sh
+      - EESSI-install-software.sh
       - install_software_layer.sh
       - load_easybuild_module.sh
       - run_in_compat_layer_env.sh
@@ -16,7 +16,7 @@ on:
     paths:
       - build_container.sh
       - create_directory_tarballs.sh
-      - EESSI-pilot-install-software.sh
+      - EESSI-install-software.sh
       - install_software_layer.sh
       - load_easybuild_module.sh
       - run_in_compat_layer_env.sh
@@ -40,7 +40,7 @@ jobs:
         # bind current directory into container as /software-layer
         export SINGULARITY_BIND="${PWD}:/software-layer"
 
-        # can't test with EasyBuild versions older than v4.5.2 when using EESSI pilot 2023.06,
+        # can't test with EasyBuild versions older than v4.5.2 when using EESSI 2023.06,
         # since Python in compat layer is Python 3.11.x;
         # testing with a single EasyBuild version takes a while in GitHub Actions, so stick to a single sensible version
         for EB_VERSION in '4.6.0'; do
@@ -84,15 +84,15 @@ jobs:
           cp -a * /tmp/
           cd /tmp
           # force using x86_64/generic, to avoid triggering an installation from scratch
-          sed -i "s@./EESSI-pilot-install-software.sh@\"export EESSI_SOFTWARE_SUBDIR_OVERRIDE='x86_64/generic'; ./EESSI-pilot-install-software.sh\"@g" install_software_layer.sh
-          ./build_container.sh run /tmp/$USER/EESSI /tmp/install_software_layer.sh
+          sed -i "s@./EESSI-install-software.sh@\"export EESSI_SOFTWARE_SUBDIR_OVERRIDE='x86_64/generic'; ./EESSI-install-software.sh\"@g" install_software_layer.sh
+          ./eessi_container.sh --mode run --verbose /tmp/install_software_layer.sh
 
     - name: test create_directory_tarballs.sh script
       run: |
           # scripts need to be copied to /tmp,
           # since create_directory_tarballs.sh must be accessible from within build container
           cp -a * /tmp/
           cd /tmp
-          ./build_container.sh run /tmp/$USER/EESSI /tmp/create_directory_tarballs.sh 2023.06
+          ./eessi_container.sh --mode run --verbose /tmp/create_directory_tarballs.sh 2023.06
           # check if tarballs have been produced
           ls -l *.tar.gz
diff --git a/EESSI-pilot-install-software.sh → EESSI-install-software.sh b/EESSI-pilot-install-software.sh → EESSI-install-software.sh
@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# Script to install EESSI pilot software stack (version set through init/eessi_defaults)
+# Script to install EESSI software stack (version set through init/eessi_defaults)
 
 # see example parsing of command line arguments at
 #   https://wiki.bash-hackers.org/scripting/posparams#using_a_while_loop
@@ -172,8 +172,6 @@ if [ ! -z "${shared_fs_path}" ]; then
     export EASYBUILD_SOURCEPATH=${shared_eb_sourcepath}:${EASYBUILD_SOURCEPATH}
 fi
 
-${EB} --show-config
-
 echo ">> Setting up \$MODULEPATH..."
 # make sure no modules are loaded
 module --force purge
@@ -200,6 +198,8 @@ for easystack_file in $(cat ${pr_diff} | grep '^+++' | cut -f2 -d' ' | sed 's@^[
     # load EasyBuild module (will be installed if it's not available yet)
     source ${TOPDIR}/load_easybuild_module.sh ${eb_version}
 
+    ${EB} --show-config
+
     echo_green "All set, let's start installing some software with EasyBuild v${eb_version} in ${EASYBUILD_INSTALLPATH}..."
 
     if [ -f ${easystack_file} ]; then

diff --git a/bot/build.sh b/bot/build.sh
@@ -128,12 +128,12 @@ EESSI_REPOS_CFG_DIR_OVERRIDE=$(cfg_get_value "repository" "repos_cfg_dir")
 export EESSI_REPOS_CFG_DIR_OVERRIDE=${EESSI_REPOS_CFG_DIR_OVERRIDE:-${PWD}/cfg}
 echo "bot/build.sh: EESSI_REPOS_CFG_DIR_OVERRIDE='${EESSI_REPOS_CFG_DIR_OVERRIDE}'"
 
-# determine pilot version to be used from .repository.repo_version in ${JOB_CFG_FILE}
-# here, just set & export EESSI_PILOT_VERSION_OVERRIDE
+# determine EESSI version to be used from .repository.repo_version in ${JOB_CFG_FILE}
+# here, just set & export EESSI_VERSION_OVERRIDE
 # next script (eessi_container.sh) makes use of it via sourcing init scripts
 # (e.g., init/eessi_defaults or init/minimal_eessi_env)
-export EESSI_PILOT_VERSION_OVERRIDE=$(cfg_get_value "repository" "repo_version")
-echo "bot/build.sh: EESSI_PILOT_VERSION_OVERRIDE='${EESSI_PILOT_VERSION_OVERRIDE}'"
+export EESSI_VERSION_OVERRIDE=$(cfg_get_value "repository" "repo_version")
+echo "bot/build.sh: EESSI_VERSION_OVERRIDE='${EESSI_VERSION_OVERRIDE}'"
 
 # determine CVMFS repo to be used from .repository.repo_name in ${JOB_CFG_FILE}
 # here, just set EESSI_CVMFS_REPO_OVERRIDE, a bit further down
@@ -210,9 +210,9 @@ BUILD_TMPDIR=$(grep ' as tmp directory ' ${build_outerr} | cut -d ' ' -f 2)
 TARBALL_STEP_ARGS+=("--resume" "${BUILD_TMPDIR}")
 
 timestamp=$(date +%s)
-# to set EESSI_PILOT_VERSION we need to source init/eessi_defaults now
+# to set EESSI_VERSION we need to source init/eessi_defaults now
 source init/eessi_defaults
-export TGZ=$(printf "eessi-%s-software-%s-%s-%d.tar.gz" ${EESSI_PILOT_VERSION} ${EESSI_OS_TYPE} ${EESSI_SOFTWARE_SUBDIR_OVERRIDE//\//-} ${timestamp})
+export TGZ=$(printf "eessi-%s-software-%s-%s-%d.tar.gz" ${EESSI_VERSION} ${EESSI_OS_TYPE} ${EESSI_SOFTWARE_SUBDIR_OVERRIDE//\//-} ${timestamp})
 
 # value of first parameter to create_tarball.sh - TMP_IN_CONTAINER - needs to be
 # synchronised with setting of TMP_IN_CONTAINER in eessi_container.sh
@@ -221,8 +221,8 @@ export TGZ=$(printf "eessi-%s-software-%s-%s-%d.tar.gz" ${EESSI_PILOT_VERSION} $
 TMP_IN_CONTAINER=/tmp
 echo "Executing command to create tarball:"
 echo "./eessi_container.sh ${COMMON_ARGS[@]} ${TARBALL_STEP_ARGS[@]}"
-echo "                     -- ./create_tarball.sh ${TMP_IN_CONTAINER} ${EESSI_PILOT_VERSION} ${EESSI_SOFTWARE_SUBDIR_OVERRIDE} /eessi_bot_job/${TGZ} 2>&1 | tee -a ${tar_outerr}"
+echo "                     -- ./create_tarball.sh ${TMP_IN_CONTAINER} ${EESSI_VERSION} ${EESSI_SOFTWARE_SUBDIR_OVERRIDE} /eessi_bot_job/${TGZ} 2>&1 | tee -a ${tar_outerr}"
 ./eessi_container.sh "${COMMON_ARGS[@]}" "${TARBALL_STEP_ARGS[@]}" \
-                     -- ./create_tarball.sh ${TMP_IN_CONTAINER} ${EESSI_PILOT_VERSION} ${EESSI_SOFTWARE_SUBDIR_OVERRIDE} /eessi_bot_job/${TGZ} 2>&1 | tee -a ${tar_outerr}
+                     -- ./create_tarball.sh ${TMP_IN_CONTAINER} ${EESSI_VERSION} ${EESSI_SOFTWARE_SUBDIR_OVERRIDE} /eessi_bot_job/${TGZ} 2>&1 | tee -a ${tar_outerr}
 
 exit 0
diff --git a/bot/inspect.sh b/bot/inspect.sh
@@ -195,12 +195,12 @@ EESSI_REPOS_CFG_DIR_OVERRIDE=$(cfg_get_value "repository" "repos_cfg_dir")
 export EESSI_REPOS_CFG_DIR_OVERRIDE=${EESSI_REPOS_CFG_DIR_OVERRIDE:-${PWD}/cfg}
 echo "bot/inspect.sh: EESSI_REPOS_CFG_DIR_OVERRIDE='${EESSI_REPOS_CFG_DIR_OVERRIDE}'"
 
-# determine pilot version to be used from .repository.repo_version in ${JOB_CFG_FILE}
-# here, just set & export EESSI_PILOT_VERSION_OVERRIDE
+# determine EESSI version to be used from .repository.repo_version in ${JOB_CFG_FILE}
+# here, just set & export EESSI_VERSION_OVERRIDE
 # next script (eessi_container.sh) makes use of it via sourcing init scripts
 # (e.g., init/eessi_defaults or init/minimal_eessi_env)
-export EESSI_PILOT_VERSION_OVERRIDE=$(cfg_get_value "repository" "repo_version")
-echo "bot/inspect.sh: EESSI_PILOT_VERSION_OVERRIDE='${EESSI_PILOT_VERSION_OVERRIDE}'"
+export EESSI_VERSION_OVERRIDE=$(cfg_get_value "repository" "repo_version")
+echo "bot/inspect.sh: EESSI_VERSION_OVERRIDE='${EESSI_VERSION_OVERRIDE}'"
 
 # determine CVMFS repo to be used from .repository.repo_name in ${JOB_CFG_FILE}
 # here, just set EESSI_CVMFS_REPO_OVERRIDE, a bit further down
@@ -260,11 +260,11 @@ base_dir=$(dirname $(realpath $0))
 # TODO better use script from tarball???
 source ${base_dir}/../init/eessi_defaults
 
-if [ -z $EESSI_PILOT_VERSION ]; then
-    echo "ERROR: \$EESSI_PILOT_VERSION must be set!" >&2
+if [ -z $EESSI_VERSION ]; then
+    echo "ERROR: \$EESSI_VERSION must be set!" >&2
     exit 1
 fi
-EESSI_COMPAT_LAYER_DIR="${EESSI_CVMFS_REPO}/versions/${EESSI_PILOT_VERSION}/compat/linux/$(uname -m)"
+EESSI_COMPAT_LAYER_DIR="${EESSI_CVMFS_REPO}/versions/${EESSI_VERSION}/compat/linux/$(uname -m)"
 
 # NOTE The below requires access to the CVMFS repository. We could make a first
 # test run with a container. For now we skip the test.
@@ -295,8 +295,8 @@ fi
 if [ ! -z ${EESSI_CVMFS_REPO_OVERRIDE} ]; then
     echo "export EESSI_CVMFS_REPO_OVERRIDE=${EESSI_CVMFS_REPO_OVERRIDE}" >> ${RESUME_SCRIPT}
 fi
-if [ ! -z ${EESSI_PILOT_VERSION_OVERRIDE} ]; then
-    echo "export EESSI_PILOT_VERSION_OVERRIDE=${EESSI_PILOT_VERSION_OVERRIDE}" >> ${RESUME_SCRIPT}
+if [ ! -z ${EESSI_VERSION_OVERRIDE} ]; then
+    echo "export EESSI_VERSION_OVERRIDE=${EESSI_VERSION_OVERRIDE}" >> ${RESUME_SCRIPT}
 fi
 if [ ! -z ${http_proxy} ]; then
     echo "export http_proxy=${http_proxy}" >> ${RESUME_SCRIPT}
@@ -428,7 +428,7 @@ echo "Executing command to start interactive session to inspect build job:"
 # TODO possibly add information on how to init session after the prefix is
 # entered, initialization consists of
 # - environment variable settings (see 'run_in_compat_layer_env.sh')
-# - setup steps run in 'EESSI-pilot-install-software.sh'
+# - setup steps run in 'EESSI-install-software.sh'
 # These initializations are combined into a single script that is executed when
 # the shell in startprefix is started. We set the env variable BASH_ENV here.
 if [[ -z ${run_in_prefix} ]]; then

diff --git a/install_software_layer.sh b/install_software_layer.sh
@@ -1,4 +1,4 @@
 #!/bin/bash
 base_dir=$(dirname $(realpath $0))
 source ${base_dir}/init/eessi_defaults
-./run_in_compat_layer_env.sh ./EESSI-pilot-install-software.sh "$@"
+./run_in_compat_layer_env.sh ./EESSI-install-software.sh "$@"
diff --git a/run_in_compat_layer_env.sh b/run_in_compat_layer_env.sh
@@ -3,11 +3,11 @@
 base_dir=$(dirname $(realpath $0))
 source ${base_dir}/init/eessi_defaults
 
-if [ -z $EESSI_PILOT_VERSION ]; then
-    echo "ERROR: \$EESSI_PILOT_VERSION must be set!" >&2
+if [ -z $EESSI_VERSION ]; then
+    echo "ERROR: \$EESSI_VERSION must be set!" >&2
     exit 1
 fi
-EESSI_COMPAT_LAYER_DIR="${EESSI_CVMFS_REPO}/versions/${EESSI_PILOT_VERSION}/compat/linux/$(uname -m)"
+EESSI_COMPAT_LAYER_DIR="${EESSI_CVMFS_REPO}/versions/${EESSI_VERSION}/compat/linux/$(uname -m)"
 if [ ! -d ${EESSI_COMPAT_LAYER_DIR} ]; then
     echo "ERROR: ${EESSI_COMPAT_LAYER_DIR} does not exist!" >&2
     exit 1
@@ -23,8 +23,8 @@ fi
 if [ ! -z ${EESSI_CVMFS_REPO_OVERRIDE} ]; then
     INPUT="export EESSI_CVMFS_REPO_OVERRIDE=${EESSI_CVMFS_REPO_OVERRIDE}; ${INPUT}"
 fi
-if [ ! -z ${EESSI_PILOT_VERSION_OVERRIDE} ]; then
-    INPUT="export EESSI_PILOT_VERSION_OVERRIDE=${EESSI_PILOT_VERSION_OVERRIDE}; ${INPUT}"
+if [ ! -z ${EESSI_VERSION_OVERRIDE} ]; then
+    INPUT="export EESSI_VERSION_OVERRIDE=${EESSI_VERSION_OVERRIDE}; ${INPUT}"
 fi
 if [ ! -z ${http_proxy} ]; then
     INPUT="export http_proxy=${http_proxy}; ${INPUT}"
@@ -33,5 +33,5 @@ if [ ! -z ${https_proxy} ]; then
     INPUT="export https_proxy=${https_proxy}; ${INPUT}"
 fi
 
-echo "Running '${INPUT}' in EESSI (${EESSI_CVMFS_REPO}) ${EESSI_PILOT_VERSION} compatibility layer environment..."
+echo "Running '${INPUT}' in EESSI (${EESSI_CVMFS_REPO}) ${EESSI_VERSION} compatibility layer environment..."
 ${EESSI_COMPAT_LAYER_DIR}/startprefix <<< "${INPUT}"