unit formatting nit

docs/guide/delwaq.ipynb

@@ -200,7 +200,7 @@
    "name": "python",
    "nbconvert_exporter": "python",
    "pygments_lexer": "ipython3",
-   "version": "3.12.4"
+   "version": "3.12.5"
   }
  },
  "nbformat": 4,

docs/reference/node/basin.qmd

@@ -18,10 +18,10 @@ time table, it is empty, or all timestamps of that variable are missing.
 column                | type    | unit                  | restriction
 ---------             | ------- | --------------------- | -----------
 node_id               | Int32   | -                     | sorted
-precipitation         | Float64 | $\text{m}/\text{s}$   | non-negative
-potential_evaporation | Float64 | $\text{m}/\text{s}$   | non-negative
-drainage              | Float64 | $\text{m}^3/\text{s}$ | non-negative
-infiltration          | Float64 | $\text{m}^3/\text{s}$ | non-negative
+precipitation         | Float64 | $\text m}/\text{s}$   | non-negative
+potential_evaporation | Float64 | $\text m}/\text{s}$   | non-negative
+drainage              | Float64 | $\text m}^3/\text{s}$ | non-negative
+infiltration          | Float64 | $\text m}^3/\text{s}$ | non-negative
 
 Note that if variables are not set in the static table, default values are used when
 possible. These are generally zero, e.g. no precipitation, no inflow. If it is not possible
@@ -93,7 +93,7 @@ The state table gives the initial water levels of all Basins.
 column    | type    | unit         | restriction
 --------- | ------- | ------------ | -----------
 node_id   | Int32   | -            | sorted
-level     | Float64 | $\text{m}$   | $\ge$ basin bottom
+level     | Float64 | $\text m}$   | $\ge$ basin bottom
 
 Each Basin ID needs to be in the table.
 To use the final state of an earlier simulation as an initial condition, copy [`results/basin_state.arrow`](/reference/usage.qmd#sec-state) over to the `input_dir`, and point the TOML to it:
@@ -114,8 +114,8 @@ The profile table defines the physical dimensions of the storage reservoir of ea
 column    | type    | unit         | restriction
 --------- | ------- | ------------ | -----------
 node_id   | Int32   | -            | sorted
-area      | Float64 | $\text{m}^2$ | non-negative, per node_id: start positive and not decreasing
-level     | Float64 | $\text{m}$   | per node_id: increasing
+area      | Float64 | $\text m}^2$ | non-negative, per node_id: start positive and not decreasing
+level     | Float64 | $\text m}$   | per node_id: increasing
 
 The level is the level at the basin outlet. All levels are defined in meters above a datum
 that is the same for the entire model. An example of the first 4 rows of such a table is
@@ -369,8 +369,8 @@ column        | type    | unit         | restriction
 ------------- | ------- | ------------ | ------------------------
 subgrid_id    | Int32   | -            | sorted
 node_id       | Int32   | -            | constant per subgrid_id
-basin_level   | Float64 | $\text{m}$   | sorted per subgrid_id
-subgrid_level | Float64 | $\text{m}$   | sorted per subgrid_id
+basin_level   | Float64 | $\text m}$   | sorted per subgrid_id
+subgrid_level | Float64 | $\text m}$   | sorted per subgrid_id
 
 The table below shows example input for two subgrid elements:
 
@@ -399,8 +399,8 @@ column        | type     | unit                     | restriction
 node_id       | Int32    | -                        | sorted
 time          | DateTime | -                        | sorted per node_id
 substance     | String   |                          | can correspond to known Delwaq substances
-drainage      | Float64  | $\text{g}/\text{m}^3$ | (optional)
-precipitation | Float64  | $\text{g}/\text{m}^3$ | (optional)
+drainage      | Float64  | $\text{g}/\text m}^3$ | (optional)
+precipitation | Float64  | $\text{g}/\text m}^3$ | (optional)
 
 ## ConcentrationState {#sec-basin-conc-state}
 This table defines the concentration(s) of (a) substance(s) in the basin at the start of the simulation.
@@ -410,7 +410,7 @@ column         | type     | unit                     | restriction
 node_id        | Int32    | -                        | sorted
 time           | DateTime | -                        | sorted per node_id
 substance      | String   | -                        | can correspond to known Delwaq substances
-concentration  | Float64  | $\text{g}/\text{m}^3$ |
+concentration  | Float64  | $\text{g}/\text m}^3$ |
 
 ## ConcentrationExternal
 This table is used for (external) concentrations, that can be used for Control lookups.
@@ -420,7 +420,7 @@ column         | type     | unit                     | restriction
 node_id        | Int32    | -                        | sorted
 time           | DateTime | -                        | sorted per node_id
 substance      | String   | -                        | can correspond to known Delwaq substances
-concentration  | Float64  | $\text{g}/\text{m}^3$ |
+concentration  | Float64  | $\text{g}/\text m}^3$ |
 
 # Equations
 
@@ -520,7 +520,7 @@ $$
     Q_\text{inf} = \sum_{i=1}^{n} \sum_{j=1}^{m} \max(Q_{\mathrm{mf6}_{i,j}}, 0.0)
 $$ {#eq-inf}
 
-Where $i$ is the index of the boundary condition, $j$ the MODFLOW 6 cell index, $n$ the number of boundary conditions, and $\text{m}$ the number of MODFLOW 6 cells in the Basin.
+Where $i$ is the index of the boundary condition, $j$ the MODFLOW 6 cell index, $n$ the number of boundary conditions, and $\text m}$ the number of MODFLOW 6 cells in the Basin.
 $Q_{\mathrm{mf6}_{i,j}}$ is the flow computed by MODFLOW 6 for cell $j$ for boundary condition $i$.
 
 Drainage is a lump sum for the Basin, and consists of the sum of the absolute value of all **negative** flows of the MODFLOW 6 boundary conditions in the Basin.

docs/reference/node/flow-boundary.qmd

@@ -19,7 +19,7 @@ column        | type    | unit                  | restriction
 ------------- | ------- | --------------------- | -----------
 node_id       | Int32   | -                     | sorted
 active        | Bool    | -                     | (optional, default true)
-flow_rate     | Float64 | $\text{m}^3/\text{s}$ | non-negative
+flow_rate     | Float64 | $\text m}^3/\text{s}$ | non-negative
 
 ## Time
 
@@ -35,7 +35,7 @@ column    | type     | unit                  | restriction
 --------- | -------  | --------------------- | -----------
 node_id   | Int32    | -                     | sorted
 time      | DateTime | -                     | sorted per node_id
-flow_rate | Float64  | $\text{m}^3/\text{s}$ | non-negative
+flow_rate | Float64  | $\text m}^3/\text{s}$ | non-negative
 
 ## Concentration {#sec-flow-boundary-conc}
 This table defines the concentration(s) of (a) substance(s) for the flow from the FlowBoundary.
@@ -45,7 +45,7 @@ column         | type     | unit                  | restriction
 node_id        | Int32    | -                     | sorted
 time           | DateTime | -                     | sorted per node_id
 substance      | String   | -                     | can correspond to known Delwaq substances
-concentration  | Float64  | $\text{g}/\text{m}^3$ |
+concentration  | Float64  | $\text{g}/\text m}^3$ |
 
 # Equations
 

docs/reference/node/flow-demand.qmd

@@ -13,7 +13,7 @@ column        | type     | unit                  | restriction
 ------------- | -------- | --------------------- | -----------
 node_id       | Int32    | -                     | sorted
 priority      | Int32    | -                     | positive
-demand        | Float64  | $\text{m}^3/\text{s}$ | non-negative
+demand        | Float64  | $\text m}^3/\text{s}$ | non-negative
 
 ## Time
 
@@ -25,4 +25,4 @@ column        | type     | unit                  | restriction
 node_id       | Int32    | -                     | sorted
 time          | DateTime | -                     | sorted per node_id
 priority      | Int32    | -                     | positive
-demand        | Float64  | $\text{m}^3/\text{s}$ | non-negative
+demand        | Float64  | $\text m}^3/\text{s}$ | non-negative

docs/reference/node/level-boundary.qmd

@@ -15,7 +15,7 @@ column        | type    | unit         | restriction
 ------------- | ------- | ------------ | -----------
 node_id       | Int32   | -            | sorted
 active        | Bool    | -            | (optional, default true)
-level         | Float64 | $\text{m}$          | -
+level         | Float64 | $\text m}$          | -
 
 ## Time
 
@@ -31,7 +31,7 @@ column    | type     | unit         | restriction
 --------- | -------  | ------------ | -----------
 node_id   | Int32    | -            | sorted
 time      | DateTime | -            | sorted per node_id
-level     | Float64  | $\text{m}$   | -
+level     | Float64  | $\text m}$   | -
 
 ## Concentration {#sec-level-boundary-conc}
 This table defines the concentration(s) of (a) substance(s) for the flow from the LevelBoundary.
@@ -41,7 +41,7 @@ column         | type     | unit                  | restriction
 node_id        | Int32    | -                     | sorted
 time           | DateTime | -                     | sorted per node_id
 substance      | String   | -                     | can correspond to known Delwaq substances
-concentration  | Float64  | $\text{g}/\text{m}^3$ |
+concentration  | Float64  | $\text{g}/\text m}^3$ |
 
 # Equations
 

docs/reference/node/level-demand.qmd

@@ -20,8 +20,8 @@ If both are missing, `LevelDemand` won't have any effects on allocation.
 column        | type    | unit         | restriction
 ------------- | ------- | ------------ | -----------
 node_id       | Int32   | -            | sorted
-min_level     | Float64 | $\text{m}$   | (optional, default -Inf)
-max_level     | Float64 | $\text{m}$   | (optional, default Inf)
+min_level     | Float64 | $\text m}$   | (optional, default -Inf)
+max_level     | Float64 | $\text m}$   | (optional, default Inf)
 priority      | Int32   | -            | positive
 
 ## Time
@@ -33,6 +33,6 @@ column        | type     | unit         | restriction
 ------------- | -------  | ------------ | -----------
 node_id       | Int32    | -            | sorted
 time          | DateTime | -            | sorted per node id
-min_level     | Float64  | $\text{m}$   | -
-max_level     | Float64  | $\text{m}$   | -
+min_level     | Float64  | $\text m}$   | -
+max_level     | Float64  | $\text m}$   | -
 priority      | Int32    | -            | positive

docs/reference/node/linear-resistance.qmd

@@ -13,8 +13,8 @@ column        | type    | unit                  | restriction
 node_id       | Int32   | -                     | sorted
 control_state | String  | -                     | (optional) sorted per node_id
 active        | Bool    | -                     | (optional, default true)
-resistance    | Float64 | $\text{s}/\text{m}^2$ | -
-max_flow_rate | Float64 | $\text{m}^3/s$        | non-negative
+resistance    | Float64 | $\text{s}/\text m}^2$ | -
+max_flow_rate | Float64 | $\text m}^3/s$        | non-negative
 
 # Equations
 

docs/reference/node/manning-resistance.qmd

@@ -14,9 +14,9 @@ column        | type    | unit                               | restriction
 node_id       | Int32   | -                                  | sorted
 control_state | String  | -                                  | (optional) sorted per node_id
 active        | Bool    | -                                  | (optional, default true)
-length        | Float64 | $\text{m}$                         | positive
-manning_n     | Float64 | $\text{s} \text{m}^{-\frac{1}{3}}$ | positive
-profile_width | Float64 | $\text{m}$                         | positive
+length        | Float64 | $\text m}$                         | positive
+manning_n     | Float64 | $\text{s} \text m}^{-\frac{1}{3}}$ | positive
+profile_width | Float64 | $\text m}$                         | positive
 profile_slope | Float64 | -                                  | -
 
 # Equations

docs/reference/node/outlet.qmd

@@ -16,11 +16,11 @@ column                | type    | unit                   | restriction
 node_id               | Int32   | -                      | sorted
 control_state         | String  | -                      | (optional) sorted per node_id
 active                | Bool    | -                      | (optional, default true)
-flow_rate             | Float64 | $\text{m}^3/\text{s}\$ | non-negative
-min_flow_rate         | Float64 | $\text{m}^3/\text{s}\$ | (optional, default 0.0)
-max_flow_rate         | Float64 | $\text{m}^3/\text{s}\$ | (optional)
-min_upstream_level    | Float64 | $\text{m}$             | (optional)
-max_downstream_level  | Float64 | $\text{m}$             | (optional)
+flow_rate             | Float64 | $\text m}^3/\text{s}\$ | non-negative
+min_flow_rate         | Float64 | $\text m}^3/\text{s}\$ | (optional, default 0.0)
+max_flow_rate         | Float64 | $\text m}^3/\text{s}\$ | (optional)
+min_upstream_level    | Float64 | $\text m}$             | (optional)
+max_downstream_level  | Float64 | $\text m}$             | (optional)
 
 # Equations
 

docs/reference/node/pid-control.qmd

@@ -20,7 +20,7 @@ control_state    | String   | -               | (optional) sorted per node_id
 active           | Bool     | -               | (optional, default true)
 listen_node_type | String   | -               | known node type
 listen_node_id   | Int32    | -               | -
-target           | Float64  | $\text{m}$      | -
+target           | Float64  | $\text m}$      | -
 proportional     | Float64  | $\text{s}^{-1}$ | -
 integral         | Float64  | $\text{s}^{-2}$ | -
 derivative       | Float64  | -               | -
@@ -41,7 +41,7 @@ node_id          | Int32    | -               | sorted
 time             | DateTime | -               | sorted per node_id
 listen_node_type | Int32    | -               | known node type
 listen_node_id   | Int32    | -               | -
-target           | Float64  | $\text{m}$      | -
+target           | Float64  | $\text m}$      | -
 proportional     | Float64  | $\text{s}^{-1}$ | -
 integral         | Float64  | $\text{s}^{-2}$ | -
 derivative       | Float64  | -               | -

docs/reference/node/pump.qmd

@@ -17,11 +17,11 @@ column                | type    | unit         | restriction
 node_id               | Int32   | -            | sorted
 control_state         | String  | -            | (optional) sorted per node_id
 active                | Bool    | -            | (optional, default true)
-flow_rate             | Float64 | $\text{m}^3/\text{s}$ | non-negative
-min_flow_rate         | Float64 | $\text{m}^3/\text{s}$ | (optional, default 0.0)
-max_flow_rate         | Float64 | $\text{m}^3/\text{s}$ | (optional)
-min_upstream_level    | Float64 | $\text{m}$          | (optional)
-max_downstream_level  | Float64 | $\text{m}$          | (optional)
+flow_rate             | Float64 | $\text m}^3/\text{s}$ | non-negative
+min_flow_rate         | Float64 | $\text m}^3/\text{s}$ | (optional, default 0.0)
+max_flow_rate         | Float64 | $\text m}^3/\text{s}$ | (optional)
+min_upstream_level    | Float64 | $\text m}$          | (optional)
+max_downstream_level  | Float64 | $\text m}$          | (optional)
 
 # Equations
 

docs/reference/node/tabulated-rating-curve.qmd

@@ -15,9 +15,9 @@ column               | type    | unit                  | restriction
 node_id              | Int32   | -                     | sorted
 control_state        | String  | -                     | (optional) sorted per node_id
 active               | Bool    | -                     | (optional, default true)
-max_downstream_level | Float64 | $\text{m}$            | (optional)
-level                | Float64 | $\text{m}$            | sorted per control_state, unique
-flow_rate            | Float64 | $\text{m}^3/\text{s}$ | start at 0, increasing
+max_downstream_level | Float64 | $\text m}$            | (optional)
+level                | Float64 | $\text m}$            | sorted per control_state, unique
+flow_rate            | Float64 | $\text m}^3/\text{s}$ | start at 0, increasing
 
 Thus a single rating curve can be given by the following table:
 
@@ -89,9 +89,9 @@ column               | type     | unit                  | restriction
 -------------------- | -------  | --------------------- | -----------
 node_id              | Int32    | -                     | sorted
 time                 | DateTime | -                     | sorted per node_id
-level                | Float64  | $\text{m}$            | sorted per node_id per time
-flow_rate            | Float64  | $\text{m}^3/\text{s}$ | non-negative
-max_downstream_level | Float64  | $\text{m}$            | (optional)
+level                | Float64  | $\text m}$            | sorted per node_id per time
+flow_rate            | Float64  | $\text m}^3/\text{s}$ | non-negative
+max_downstream_level | Float64  | $\text m}$            | (optional)
 
 # Equations
 

docs/reference/node/user-demand.qmd

@@ -26,9 +26,9 @@ column        | type    | unit                  | restriction
 ------------- | ------- | ----------------------| -----------
 node_id       | Int32   | -                     | sorted
 active        | Bool    | -                     | (optional, default true)
-demand        | Float64 | $\text{m}^3/\text{s}$ | non-negative
+demand        | Float64 | $\text m}^3/\text{s}$ | non-negative
 return_factor | Float64 | -                     | between [0 - 1]
-min_level     | Float64 | $\text{m}$            | -
+min_level     | Float64 | $\text m}$            | -
 priority      | Int32   | -                     | positive, sorted per node id
 
 ## Time
@@ -47,9 +47,9 @@ column        | type     | unit                  | restriction
 node_id       | Int32    | -                     | sorted
 priority      | Int32    | -                     | positive, sorted per node id
 time          | DateTime | -                     | sorted per priority per node id
-demand        | Float64  | $\text{m}^3/\text{s}$ | non-negative
+demand        | Float64  | $\text m}^3/\text{s}$ | non-negative
 return_factor | Float64  | -                     | between [0 - 1]
-min_level     | Float64  | $\text{m}$            | -
+min_level     | Float64  | $\text m}$            | -
 
 # Equations
 

docs/reference/usage.qmd

@@ -205,16 +205,16 @@ column         | type     | unit
 -------------- | ---------| ----
 time           | DateTime | -
 node_id        | Int32    | -
-storage        | Float64  | $\text{m}^3$
-level          | Float64  | $\text{m}$
-inflow_rate    | Float64  | $\text{m}^3/\text{s}$
-outflow_rate   | Float64  | $\text{m}^3/\text{s}$
-storage_rate   | Float64  | $\text{m}^3/\text{s}$
-precipitation  | Float64  | $\text{m}^3/\text{s}$
-evaporation    | Float64  | $\text{m}^3/\text{s}$
-drainage       | Float64  | $\text{m}^3/\text{s}$
-infiltration   | Float64  | $\text{m}^3/\text{s}$
-balance_error  | Float64  | $\text{m}^3/\text{s}$
+storage        | Float64  | $\text m}^3$
+level          | Float64  | $\text m}$
+inflow_rate    | Float64  | $\text m}^3/\text{s}$
+outflow_rate   | Float64  | $\text m}^3/\text{s}$
+storage_rate   | Float64  | $\text m}^3/\text{s}$
+precipitation  | Float64  | $\text m}^3/\text{s}$
+evaporation    | Float64  | $\text m}^3/\text{s}$
+drainage       | Float64  | $\text m}^3/\text{s}$
+infiltration   | Float64  | $\text m}^3/\text{s}$
+balance_error  | Float64  | $\text m}^3/\text{s}$
 relative_error | Float64  | -
 
 The table is sorted by time, and per time it is sorted by `node_id`.
@@ -232,7 +232,7 @@ from_node_type | String                | -
 from_node_id   | Int32                 | -
 to_node_type   | String                | -
 to_node_id     | Int32                 | -
-flow_rate      | Float64               | $\text{m}^3/\text{s}$
+flow_rate      | Float64               | $\text m}^3/\text{s}$
 
 The table is sorted by time, and per time the same `edge_id` order is used, though not sorted.
 The `edge_id` value is the same as the `fid` written to the Edge table, and can be used to directly look up the Edge geometry.
@@ -245,7 +245,7 @@ The Basin state table contains the water levels in each Basin at the end of the
 column    | type    | unit
 --------- | ------- | ------------
 node_id   | Int32   | -
-level     | Float64 | $\text{m}$
+level     | Float64 | $\text m}$
 
 To use this result as the initial condition of another simulation, see the [Basin / state](/reference/node/basin.qmd#sec-state) table reference.