Matter SDK Doctor (project-chip#32554)

* Adds Matter SDK Doctor

* Fix restyle

* Fix restyle

* Fix restyle

* Fix restyle

scripts/sdk-doctor/_network.sh

@@ -0,0 +1,80 @@
+#!/bin/bash
+
+#
+# Copyright (c) 2024 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Function to display information for each network interface
+display_interface_info() {
+    interface=$1
+    echo "Interface: $interface"
+
+    # Check if interface is up
+    if ip link show "$interface" | grep -q 'state UP'; then
+        echo "  Status: UP"
+    else
+        echo "  Status: DOWN"
+    fi
+
+    # Get and display the IPv4 address
+    ipv4_address=$(ip -4 addr show "$interface" | grep -oP '(?<=inet\s)\d+(\.\d+){3}')
+    [ -z "$ipv4_address" ] && ipv4_address="N/A"
+    echo "  IPv4 Address: $ipv4_address"
+
+    # Get and display the IPv6 address
+    ipv6_address=$(ip -6 addr show "$interface" | grep -oP '(?<=inet6\s)[a-f0-9:]+')
+    [ -z "$ipv6_address" ] && ipv6_address="N/A"
+    echo "  IPv6 Address: $ipv6_address"
+
+    # Get and display the subnet mask
+    subnet_mask=$(ifconfig "$interface" | grep -oP '(?<=Mask:)[0-9.]+')
+    [ -z "$subnet_mask" ] && subnet_mask="N/A"
+    echo "  Subnet Mask: $subnet_mask"
+
+    # Get and display the MAC address
+    mac_address=$(ip link show "$interface" | grep -oP '(?<=ether\s)[a-f0-9:]+')
+    [ -z "$mac_address" ] && mac_address="N/A"
+    echo "  MAC Address: $mac_address"
+}
+
+# Get a list of all network interfaces
+interfaces=$(ip link show | grep -oP '(?<=^\d: )[e-w]+[0-9a-zA-Z-]+')
+
+# Iterate over each interface and display relevant information
+for intf in "$interfaces"; do
+    display_interface_info "$intf"
+    echo ""
+done
+
+# Get and display the default gateway
+default_gateway=$(ip route | grep default | awk '{print $3}')
+[ -z "$default_gateway" ] && default_gateway="N/A"
+echo "Default Gateway: $default_gateway"
+
+# Get and display the DNS server information
+mapfile -t dns_servers < <(grep nameserver /etc/resolv.conf | awk '{print $2}')
+if [ ${#dns_servers[@]} -eq 0 ]; then
+    echo "DNS Servers: N/A"
+else
+    echo "DNS Servers: ${dns_servers[*]}"
+fi
+echo
+
+# Check if Internet is available
+echo "Checking Internet availability..."
+if ping -c 1 8.8.8.8 &>/dev/null; then
+    echo "Internet is available"
+else
+    echo "Internet is not available"
+fi

scripts/sdk-doctor/_os.sh

@@ -0,0 +1,69 @@
+#!/bin/bash
+
+#
+# Copyright (c) 2024 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ROOT_DIR=$(realpath "$(dirname "$0")"/../..)
+cd "$ROOT_DIR"
+
+# Function to display OS information
+get_os_info() {
+    if [ -f /etc/os-release ]; then
+        # If available, use /etc/os-release file
+        . /etc/os-release
+        echo "Name: $NAME"
+        echo "Version: $VERSION"
+        echo "ID: $ID"
+        echo "ID Like: $ID_LIKE"
+    elif [ -f /etc/*-release ]; then
+        # If /etc/os-release is not available, use other available /etc/*-release file
+        echo "OS Information from /etc/*-release:"
+        cat /etc/*-release
+    else
+        # Print a message if unable to determine OS information
+        echo "Cannot determine OS information."
+    fi
+}
+
+# Function to display kernel information
+get_kernel_info() {
+    echo "Kernel Information:"
+    uname -a | fold -w 88 -s
+}
+
+# Function to display CPU information
+get_cpu_info() {
+    echo "CPU Information:"
+    lscpu | grep -E "^Architecture:|^CPU op-mode\(s\):|^CPU\(s\):|^Vendor ID:|^Model name:|^CPU max MHz:|^CPU min MHz:" |
+        sed 's/^[ \t]*//;s/[ \t]*$//'
+}
+
+# Function to display memory information
+get_memory_info() {
+    echo "Memory Information:"
+    free -h
+}
+
+# Call the functions to display the information
+get_os_info
+echo
+
+get_kernel_info
+echo
+
+get_cpu_info
+echo
+
+get_memory_info

scripts/sdk-doctor/_repo.sh

@@ -0,0 +1,152 @@
+#!/bin/bash
+
+#
+# Copyright (c) 2024 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ROOT_DIR=$(realpath "$(dirname "$0")"/../..)
+cd "$ROOT_DIR"
+
+get_repo_and_branch_info() {
+    # Input validation
+    if [ -z "$1" ]; then
+        echo "Please provide a path."
+        return 1
+    fi
+
+    path="$1"
+    repo_friendly_name="Matter SDK"
+
+    if [ "$path" != "." ]; then
+        title_case_path=$(echo "$path" | awk '{ for(i=1;i<=NF;i++) $i=toupper(substr($i,1,1)) tolower(substr($i,2)); }1')
+        repo_friendly_name=$title_case_path
+    fi
+
+    # Check if the directory exists
+    if [ ! -d "$path" ]; then
+        echo "Directory '$path' does not exist."
+        return 1
+    fi
+
+    cd "$path"
+
+    # Get the URL of the remote origin
+    remote_url=$(git config --get remote.origin.url)
+
+    if [ -n "$remote_url" ]; then
+        # Extract the repository name from the URL
+        repo_name=$(basename -s .git "$remote_url")
+
+        # Calculate the necessary padding to align the end pipe
+        total_length=95                                    # Adjust this based on your frame width
+        text_length=${#repo_friendly_name}+${#repo_name}+4 # 4 for the ": " and two spaces around the repo name
+        padding_length=$((total_length - text_length))
+
+        echo '+-----------------------------------------------------------------------------------------------+'
+        printf "|  %s: %s%*s|\n" "$repo_friendly_name" "$repo_name" "$padding_length" ""
+        echo '+-----------------------------------------------------------------------------------------------+'
+    else
+        # Print error message if there is no remote URL
+        echo "Not a Git repository or no remote set"
+        return 1
+    fi
+
+    # Get the current branch and its tracking branch
+    git_status=$(git status)
+    tracking_branch_info=$(echo "$git_status" | grep "Your branch is up to date with")
+
+    # Extract the fork owner and branch from the tracking branch info
+    if [[ $tracking_branch_info =~ Your\ branch\ is\ up\ to\ date\ with\ \'([^\']+)\' ]]; then
+        fork_owner_and_branch="${BASH_REMATCH[1]}"
+    else
+        fork_owner_and_branch="Not set or not a tracking branch"
+    fi
+
+    # Get the commit SHA of the current HEAD
+    commit_sha=$(git rev-parse HEAD)
+    echo "Commit SHA: $commit_sha"
+
+    # Get the commit message of the current HEAD
+    commit_message=$(git log -1 --pretty=format:"%B")
+    trimmed_commit_message=$(trim_commit_message "$commit_message")
+    echo "Commit Message: $trimmed_commit_message"
+
+    # Get the commit author of the current HEAD
+    commit_author=$(git log -1 --pretty=format:"%an")
+    echo "Commit Author: $commit_author"
+
+    # Get the commit date and time of the current HEAD including timezone
+    commit_datetime=$(git log -1 --pretty=format:"%cd" --date=format:"%Y-%m-%d %H:%M:%S %z")
+    echo "Commit Date: $commit_datetime"
+
+    # Attempt to find branches that contain this commit
+    branches=$(git branch --contains "$commit_sha" | sed 's/^/    /')
+
+    if [ -n "$branches" ]; then
+        echo "Contained in branches:"
+        echo "$branches"
+    else
+        echo "This commit is not on any known branch."
+    fi
+
+    echo "    Tracking: $fork_owner_and_branch"
+
+    echo
+
+    # Navigate back to the original directory
+    cd "$ROOT_DIR"
+}
+
+trim_commit_message() {
+    local commit_message="$1"
+
+    # Check if the commit message contains a newline character
+    if [[ "$commit_message" == *$'\n'* ]]; then
+        # Extract the first line of the commit message
+        local first_line="${commit_message%%$'\n'*}"
+    else
+        # If there's no newline, use the entire commit message
+        local first_line="$commit_message"
+    fi
+
+    # Trim leading and trailing whitespace from the first line and echo it
+    echo "$first_line" | sed 's/^[ \t]*//;s/[ \t]*$//'
+}
+
+# Print SDK root git status
+get_repo_and_branch_info "."
+
+# Handle arguments
+case "$1" in
+    --git-sub)
+        # Initialize an array to hold the directories
+        declare -a repo_dirs
+
+        cd "$ROOT_DIR"
+
+        # Find directories containing a .github folder and store them in the array, excluding the current directory
+        while IFS= read -r dir; do
+            # Check if the directory is not the current directory
+            if [[ "$dir" != "." ]]; then
+                repo_dirs+=("$dir")
+            fi
+        done < <(find . -type d -name .github | awk -F'/[^/]*$' '{print $1}')
+
+        # Iterate through the directories and call the function for each
+        for dir in "${repo_dirs[@]}"; do
+            get_repo_and_branch_info "$dir"
+        done
+        ;;
+    *) ;;
+esac

scripts/sdk-doctor/_version.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+#
+# Copyright (c) 2024 Project CHIP Authors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+ROOT_DIR=$(realpath "$(dirname "$0")"/../..)
+cd "$ROOT_DIR"
+
+SPEC_VERSION=$(head -n 1 "$ROOT_DIR"/SPECIFICATION_VERSION)
+SPEC_SHA=$(head -n 1 "$ROOT_DIR"/data_model/spec_sha)
+SCRAPPER_VERSION=$(head -n 1 "$ROOT_DIR"/data_model/scraper_version)
+
+echo 'SPEC VERSION:' "$SPEC_VERSION"
+echo 'SPEC SHA:' "$SPEC_SHA"
+echo 'SCRAPER VERSION:' "$SCRAPPER_VERSION"