pyxbackup
This backup script is somewhat a rewrite of https://github.com/dotmanila/mootools/blob/master/xbackup.sh.
- Can prepare a full + incrementals set with one command
- Keep backups (full and/or incrementals) prepared on source or remote server
- Compression with xbstream+gzip, tar+gzip, xbstream+qpress
- Support for encryption on top of compression via Xtrabackup encryption
- Stream backups directly to remote servers via scp or netcat, can also keep local copies
- Binary log streaming support with mysqlbinlog 5.6+
The script is initially tested only with Python 2.6 on CentOS 6.5 and Python 2.7 on Ubuntu 14.04 - running it on newer versions i.e. 3.x may lead to incompatibility issues. Will appreciate pointers/pull requests on making it compatible with Python 3.x!
Also it requires that the xtrabackup binaries i.e. innobackupex, xtrabackup*, xbstream are found in your PATH environment.
A file called pyxbackup.cnf can store configuration values. By default, the script looks for this file from /etc/pyxbackup.cnf first, if not found, on the same directory where the script is installed. It can also be specified from a manual location with the --config CLI option. Some configuration options are exclusive to the command line, they are marked with (cli) when executing pyxbackup.py --help.
You can also use multiple configuration sections akin to MySQL's popular --defaults-group option in your pyxbackup.cnf.
Below are some valid options recognized from the configuration file:
[pyxbackup]
# MySQL credentials that can be used to the instance
# being backed up, only user and pass are used at the
# time of this writing
mysql_host = 127.0.0.1
mysql_user = msandbox
mysql_pass = msandbox
mysql_port = 56190
mysql_sock = /tmp/mysql.sock
# Instructs the script to run prepare on a copy of the backup
# with redo-only. The script will maintain a copy of every
# backup inside work_dir and keep applying with redo-only
# until the next full backup is executed
apply_log = 1
# Whether to compress backups
compress = 1
# What compression tool, supports gzip and qpress
compress_with = gzip
# Send abckup failure notifications to these addresses, separated by comma
notify_by_email = [email protected]
# Send backup completion notifications to these adresses,
# separated by comma
notify_on_success = [email protected]
# Where to stor raw (compressed) backups on the local directory
# If --remote-push-only is specified, this is still needed but
# they will not contain the actual backups, only meta information
# and logs will remain to keep the backup workflow going
stor_dir = /sbx/msb/msb_5_6_190/bkp/stor
# When apply-log is enabled, this is where the "prepared-full"
# backup will be kept and also stage as temp work dir if backups
# compression is enabled
work_dir = /sbx/msb/msb_5_6_190/bkp/work
# When specified, this value will be passed as --defaults-file to
# innobackupex
mysql_cnf = /sbx/msb/msb_5_6_190/my.sandbox.cnf
# When streaming/copying backups to remote site
# this is the destination. It should have the same structure as
# stor_dir with full, incr, weekly, monthly folders within
remote_stor_dir = /sbx/msb/msb_5_6_190/bkp/stor_remote
# Remote host to stream to
remote_host = 127.0.0.1
# Optional SSH options when streaming with rsync
# "-o PasswordAuthentication=no -q" is already specified by default
ssh_opts = "-i /home/revin/.ssh/id_rsa"
# The SSH user to use when streaming to remote
ssh_user = root
# When apply_log is enabled, this is how much memory in MB
# will be used for --use-memory option with innobackupex
prepare_memory = 128
# How many sets of full + incrementals to keep in stor
retention_sets = 2
# How many archived weekly backups are kept, unused for now
retention_weeks = 0
# How many archived monthly backups are kept, unused for now
retention_months = 0
# When using binary log streaming, by default, the script will maintain
# the oldest binary log based on the oldest backup. This can be overridden
# by setting a customer retention period for binary logs for special
# cases
retention_binlogs = 365
# Same functions as innobackupex --encrypt --encrypt-key-file options
# to support for encrypted backups at rest
encrypt = AES256
encrypt_key_file = /path/to/backups/key
# innobackupex has a lot of options not covered by this wrapper
# therefore to support additional options, you can pass additional
# parameters to innobackupex using this option. Enclose them in single or
# double quotes and specify them as you would when running innobackupex
# manually. Take into account to not conflict with options like
# --compress, --encrypt*, --remote* as these are used in extended
# fashion by pyxbackup.
#
# Note that anything after the equal sign is included, quotes are not
# stripped since innobackupex can have options that will require quotes
# i.e. --include=REGEXP
extra_ibx_options = --slave-info --galera-info
# When using Percona Server with Changed Page Tracking enabled, the
# script can also purge the bitmaps automatically provided that it is
# configured with valid credentials with SUPER privileges
purge_bitmaps = 1
# By default, when storing backups to a remote storage, scp/ssh streaming is
# used. If you want to use netcat, simply specify using this option the
# netcat port to open on the remote server. The script will use SSH to connect
# to the remote server and open the nc port, make sure that the SSH user
# has the privilege to open the port i.e. try to use unprivileged port
# instead.
#
# If you have multiple backups running at the same time and storing to the
# same server, make sure to assign unique ports to each.
remote_nc_port=9999
# When pushing backups to remote Linux servers, you can specify
# the path to the pyxbackup script on the remote server and
# other config/options
# file if they are not in default locations ($PATH and /etc/pyxbackup.cnf)
remote_script=/usr/local/bin/pyxbackup --config=/path/to/custom/pyxbackup.cnf
At the very least, you should have the stor_dir and work_dir directories created. Inside stor_dir, the folders full, incr, weekly and monthly will be created if they do not exist yet. When running the backup, you should specify these options on the command line or via the configuration file above.
If you are streaming files to remote server, you should also have, aside from the 2 directories previously mentioned, the remote_stor_dir precreated withe the full, incr, weekly and monthly folders created as well.
First, create your local backup folders and install a single dependency:
mkdir /backups/folder/stor
mkdir /backups/folder/work
yum install MySQL-python # apt-get install python-mysqldb
wget https://raw.githubusercontent.com/dotmanila/pyxbackup/master/pyxbackup
chmod 0755 pyxbackup
Run you first backup!
./pyxbackup full
See more Configuration_ options above.
There are several types of compressed backups when the compress option is enabled and each can be decompressed manuall if needed in different ways:
This backup is a result when compress is enabled with combined with apply_log and compress_with=gzip. Decompressing is fairly straighforward using the tar utility:
tar xzvf /path/to/backup.tar.gz -C /path/to/destination/folder
Same as tar+gz but without the apply-log option, because we can stream the backup directly, we use xbstream format for potential optimizations like rsync for local copies and parallel options.
gzip -cd /path/to/backup.xbs.gz | xbstream -x -C /path/to/destination/folder
Similar to tar+gz, but using qpress as compression binary for when apply-log is enabled.
qpress -d /path/to/backup.qp /path/to/destination/folder
When apply-log is not used, and compress_with=qpress, this will be the format. It takes 2 steps to prepare the backup before being used.
cat /path/to/backup.xbs.qp | xbstream -x -C /path/to/destination/folder
innobackupex --decompress /path/to/destination/folder
When apply-log is enabled with encryption, compression is implicitly set to qpress. To decompress and decrypt, you can use a command like below:
xbcrypt --decrypt --encrypt-algo=ENCRYPT_ALGO \
--encrypt-key-file=/path/to/encryption/key \
--input=/path/to/backup.qp.xbcrypt \
| qpress -di /path/to/destination/folder
Similar to the previous format, except this is streamed with xbstream i.e. apply-log is disabled or remote_push_only is enabled.
xbcrypt --decrypt --encrypt-algo=ENCRYPT_ALGO \
--encrypt-key-file=/path/to/encryption/key \
--input=/path/to/backup.qp.xbcrypt \
| xbstream -x -C /path/to/destination/folder
innobackupex --decompress /path/to/destination/folder
Streaming binary logs can be done with the script via the binlog-stream command. The advantage of doing it via the script and the same configuration file as your backups is that it can keep track of your backups and automatically prune binary logs. For example, when your oldest full backup was taken 2 weeks ago, then your oldest binary log file on archive will correspond to that backup as well.
Binary log streaming requires that you configure the mysql_host, mysql_user, mysql_pass options or on the command line. Additionally aside from REPLICATION SLAVE privilege, you also need REPLICATION CLIENT as te script uses SHOW BINARY LOGS command using the MySQL account.
A simple invocation would look like:
pyxbackup binlog-stream
In some cases, if you are backing up data from a slave but want to stream the binary logs from the master, the script needs to know this is what you want as the master and slave will have a different set of binary logs. For this, you can specify the option --binlog-from-master or set binlog_from_master=1 on the configuration file.
As mentioned above, binary log streaming relies on the availability of your oldest full backup. If you do not have this, or simply want to override, you can specify the --first-binlog option with the name of the binary log from the server you want to stream from.
Additionally, if you want a custom retention period i.e. longer than your oldest backup, --retention-binlogs can help. This is specified in the number of days and can be as far back as you want. This feature relies on the timestamp header of each binary log when pruning older copies and not on filesystem metadata.
Assuming I have a very minimal pyxbackup.cnf below:
[pyxbackup]
stor_dir = /sbx/msb/msb_5_6_190/bkp/stor
work_dir = /sbx/msb/msb_5_6_190/bkp/work
retention_sets = 2
Taking a full backup:
pyxbackup full
Taking an incremental backup:
pyxbackup incr
Listing existing backups - also will help identify incomplete/failed backups that may be consuming disk space:
pyxbackup list
Support for Zabbix/Nagios tests for monitoring:
pyxbackup --status-format=[nagios|zabbix] status
When enabled, a special folder inside the work_dir will be maintained. This is prefixed with P_ and the timestamp will correspond to the last full backup that has been taken. When the full backup is taken, a --redo-only will be applied to it, any succeeding incrementals will be prepared to the same. When in need of a recent snapshot, this special folder can be a quick source.
pyxbackup --apply-log full
For example, I have these 2 backup sets with 2 incrementals each:
[revin@forge ~]$ pyxbackup list
# Full backup: 2014_10_15-11_32_32, incrementals: ['2014_10_15-11_34_17', '2014_10_15-11_32_41']
# Full backup: 2014_10_15-11_32_04, incrementals: ['2014_10_15-11_32_23', '2014_10_15-11_32_14']
If I want to prepare the backup 2014_10_15-11_32_41 and make it ready for use, I will use the following command:
pyxbackup --restore-backup=2014_10_15-11_32_41 \
--restore-dir=/sbx/msb/msb_5_6_190/bkp/tmp restore-set
After this command, I will have a folder /sbx/msb/msb_5_6_190/bkp/tmp/P_2014_10_15-11_32_41 ready for use i.e. to provision a slave or staging server.