improved readme

CIS565-Fall-2021 · Oct 12, 2021 · 494814e · 494814e
1 parent 3795f34
commit 494814e
Show file tree

Hide file tree

Showing 20 changed files with 370 additions and 186 deletions.
diff --git a/README.md b/README.md
@@ -8,32 +8,40 @@ CUDA Path Tracer
 * Tested on: Tested on: Windows 10, i3-10100F @ 3.6GHz 16GB, GeForce 1660 Super 6GB
 
 ### Features
-![nice image or two showing off some features]()
+![Stanford tryranosaurus](img/trex.png)
+![DOF example](img/DOF.png)
 
 This is a GPU based forward path tracer, which renders scenes by calculating "camera rays" bouncing around the scene,
 simulating individual light rays. The renderer supports the following features:
 - Arbitrary mesh loading using .obj file format
 - Multiple shader BSDFs, including refraction
 - Anti-aliasing
 - Depth of Field
-- Minor optimizations
+- Several optimizations
 - Adaptive Sampling* (not fully implemented)
 - Bloopers
 
 ### Arbitrary mesh loading 
-The renderer supports loading arbitrary meshes via .obj files. 
+The renderer supports loading arbitrary meshes via .obj files using
+(`tinyobjloader`)[https://github.com/tinyobjloader/tinyobjloader].
 
-One issue discovered was that the triangle intersection detection function
-initially used (`glm::intersectRayTriangle()`) does not compute intersections
-with the "back" of faces. This caused problems for open meshes like the Newell Teapot
-or for meshes assigned a refraction shader, as can be seen here:
-![newell teapot hole image]()
-![incomplete refraction image]()
 A bounding box is calculated at load time and used to optimize ray intersection
 detection. The bounding box is a mesh itself, consisting of tris. Each ray in
 the scene is initially tested for  intersection with these tris, and only if an
 intersection is found will the ray be checked against the mesh's tris.
 
+One issue discovered was that the triangle intersection detection function
+initially used (`glm::intersectRayTriangle()`) does not compute intersections
+with the "back" of faces. This caused problems for open meshes like the Newell Teapot
+or for meshes assigned a refraction shader, as can be seen here:
+![newell teapot hole image](img/back_face_cull_issue.png)
+Also somewhat visible through the noise is a secondary effect of this back face
+issue: collisions with the bounding box are not detected from within the
+bounding box. Notice the sharp lines on the floor cutting off the diffuse
+bounce close to the teapot. This is from rays on the floor near the teapot
+casting outward and missing the  teapot bounding box, and therefore not
+checking for collisions with any of the teapots actual tris.
+
 Performance impacts:
 - no spatial optimizations are made (other than the bounding box), so each
 ray that hits the bounding box is checked against every triangle in the mesh.
@@ -48,25 +56,27 @@ inherit whatever memory value the normals were initialized to.
 BSDFs are implemented to allow for pure diffuse objects, objects with diffuse
 and reflections, as well as objects with both reflection and refraction. The
 Fresnel effect is calculated using Schlick's approximation
-![image showing off different materials]()
 
 Since physically correct models do not always provide the preferred result, the
 Fresnel effect is tuneable via a user parameter. Note this is separate from the
 index of refraction (also tuneable), this is an additional parameter which controls
 the power used in Schlick's approximation. 
-![image showing different Fresnel powers]() 
-
-Performance impacts:
-- TODO: compare scene performance with/without some shader types
+![Fresnel power comparison](img/fresnel_comparison.png)
+The sphere on the right has a Fresnel power of 1, which dramatically changes
+the reflect/refract ratio in favor of reflection. The sphere in the middle has
+a Fresnel power of 3, which is only a subltle change from the (standard)
+Fresnel power of 5 on the rightmost sphere.
 
 Known limitations:
 - objects with refractions are assumed to have reflection. An object can be reflective without
 refraction, but not vice-versa. 
 
 ### Anti-aliasing
 anti-aliasing was accomplished by jittering the origin of camera rays for the initial bounce.
-![image without anti-aliasing]()
-![image with anti-aliasing]()
+![image without anti-aliasing](img/antialias_off.png)
+![image with anti-aliasing](img/antialias_on.png)
+The first image has no antialiasing and has jagged pixelated edges along
+horizontal lines. The second image has cleaner lines with no notable "jaggies".
 
 Performance impacts:
 - An unnoticeable impact to the time it takes each pixel to converge as a result of adding some small randomness.
@@ -76,15 +86,19 @@ slightly varied camera ray origins each iteration.
 ### Depth of Field
 Depth of field can optionally be simulated, with tuneable parameters for aperture size, lens radius,
 and focal distance. 
-![image showing off depth of field]()
+![DOF example](img/DOFOFF.png)
+![DOF example](img/DOF.png)
+The first image shows a scene with no simulated depth of field. The second
+image has depth of field turned on, simulating the blur according to distance
+in the same way a physical camera lens would.
 
 Performance impacts:
 - Using DOF requires a greater number of iterations to produce a clean image. The blur is a result 
 of a stochastic process, and as a result the greater the blur the larger the variance of each blurred pixel
 Known limitations:
 - This can not be combined with the "first bounce cache" optimization as it depends on 
 slightly varied camera rays each iteration. 
-### Minor optimizations
+### Optimizations
 - first bounce cache
 An option is provided to cache the first bounce of each camera ray from iteration 1, and use that cache
 for each subsequent iteration (until the camera is moved, generating a new iteration 1 and a new cache).
@@ -94,13 +108,25 @@ different code paths as a result of conditionals), rays can optionally be
 sorted by their material id. This manimizes the number of warps with different
 materials, which may take different amounts of time as a result of calculated
 differing BSDFs.
-- cull dead bounces
+- use stream compaction to cull dead bounces
 Bounces that do not hit an object (i.e. which go off into space) are culled every iteration. 
 
+The following data was gathered from a single test scene using multiple
+shaders, across all available BRDFS. All renders were run to 100 iterations at
+a resolution of 720x480. Here is the test scene at 5000 iterations:
+![test scene full render](img/test_scene.png)
+
+![optimization comparison](img/optimization_comparison.png)
 Performance impacts:
-- first bounce cache provides a noticeable improvement (TODO add a metric for this)
-- Sorting materials is noteably worse. (TODO provide a metric)
-- culling dead bounces (I think?) has a relatively neutral impact (TODO confirm and add metric)
+- notably, all optimizations are slightly worse for a trace depth of 8, when
+the benefit of these optimizations has not yet outweighed their overhead.
+- first bounce cache provides a steady, but minor improvement.
+- Stream compaction provides the most dramatic improvement, even in a scene
+that is mostly filled by collideable objects.
+- sorting materials provides a notable decrease in render times which increases
+slightly as the trace depth increases.
+- All optimizations provide a performance increase of approximately 2x!
+
 Known limitations:
 - As noted above, first bounce cache cannot be combined with DOF or anti-aliasing.
 ### Adaptive Sampling* (incomplete)
@@ -136,3 +162,12 @@ of paths when calling some relevant function. This has not been fixed in time.
 ![with]()
 ![explanations]()
 
+### Notable Sources
+- As noted above,
+(`tinyobjloader`)[https://github.com/tinyobjloader/tinyobjloader] was used for
+mesh loading. 
+- As noted in the comments, Stack Exchange and Stack overflow
+provided the math for two vector manipulation methods
+- Matt Pharr & Grep Humphreys Physically Based Rendering Texbook provided useful context
+
+
diff --git a/img/DOF.png b/img/DOF.png
diff --git a/img/DOFOFF.png b/img/DOFOFF.png
diff --git a/img/adaptiveSampleBug.png b/img/adaptiveSampleBug.png
diff --git a/img/antialias_off.png b/img/antialias_off.png
diff --git a/img/antialias_on.png b/img/antialias_on.png
diff --git a/img/back_face_cull_issue.png b/img/back_face_cull_issue.png
diff --git a/img/fresnel_comparison.png b/img/fresnel_comparison.png
diff --git a/img/heatmap.png b/img/heatmap.png
diff --git a/img/optimization_comparison.png b/img/optimization_comparison.png
diff --git a/img/refraction_mesh_blooper.png b/img/refraction_mesh_blooper.png
diff --git a/img/refraction_mesh_blooper2.png b/img/refraction_mesh_blooper2.png
diff --git a/img/stream_compaction_blooper.png b/img/stream_compaction_blooper.png
diff --git a/img/subpixel_sampling_blooper.png b/img/subpixel_sampling_blooper.png
diff --git a/img/test_scene.png b/img/test_scene.png
diff --git a/img/trex.png b/img/trex.png
diff --git a/scenes/DOF.txt b/scenes/DOF.txt
@@ -165,7 +165,7 @@ EMITTANCE   0
 
 // Camera
 CAMERA
-RES         720 480
+RES         1080 720
 FOVY        40
 ITERATIONS  5000
 DEPTH       8

diff --git a/scenes/cornell.txt b/scenes/cornell.txt
@@ -5,8 +5,8 @@ CACHE_BOUNCE 1
 USE_DOF 0
 ANTIALIAS 1
 USE_BBOX 1
-ADAPTIVE_SAMPLING 1
-MIN_SAMPLES 2
+ADAPTIVE_SAMPLING 0
+MIN_SAMPLES 2000
 PIX_VARIANCE 0.2
 
 
@@ -19,7 +19,7 @@ REFL        0
 REFR        0
 REFRIOR     0
 FRESNELPOW  5
-EMITTANCE   5
+EMITTANCE   15
 
 // Diffuse white
 MATERIAL 1
@@ -111,82 +111,113 @@ EMITTANCE   0
 
 // Camera
 CAMERA
-RES         800 800
+RES         800 600
 FOVY        45
 ITERATIONS  5000
 DEPTH       8
 FILE        cornell
 FOCALDIST	8
 APERTURE	0.5
 LENSRAD		1
-EYE         0.0 5 10.5
-LOOKAT      0 5 0
+EYE         0.0 9 6
+LOOKAT      0 5 -5.5
 UP          0 1 0
 
-
-// Ceiling light
-OBJECT 0
-cube
-material 0
-TRANS       0 10 0
-ROTAT       0 0 0
-SCALE       3 .3 3
-
 // Floor
-OBJECT 1
+OBJECT 0
 cube
 material 1
 TRANS       0 0 0
 ROTAT       0 0 0
 SCALE       10 .01 10
 
 // Ceiling
-OBJECT 2
+OBJECT 1
 cube
 material 1
 TRANS       0 10 0
 ROTAT       0 0 90
 SCALE       .01 10 10
 
 // Back wall
-OBJECT 3
+OBJECT 2
 cube
 material 5
 TRANS       0 5 -5
 ROTAT       0 90 0
 SCALE       .01 10 10
 
 // Left wall
-OBJECT 4
+OBJECT 3
 cube
 material 2
 TRANS       -5 5 0
 ROTAT       0 0 0
 SCALE       .01 10 10
 
 // Right wall
-OBJECT 5
+OBJECT 4
 cube
 material 3
 TRANS       5 5 0
 ROTAT       0 0 0
 SCALE       .01 10 10
 
+// Floor light
+OBJECT 5
+cube
+material 0
+TRANS       -3 0.05 2
+ROTAT       0 -25 0
+SCALE       3 .1 .1
+
+// Floor light
+OBJECT 6
+cube
+material 0
+TRANS       3 0.05 2
+ROTAT       0 30 0
+SCALE       3 .1 .1
+
+// Floor light
+OBJECT 7
+cube
+material 0
+TRANS       2 0.05 1
+ROTAT       0 -5 0
+SCALE       3 .1 .1
+
+// Floor light
+OBJECT 8
+cube
+material 0
+TRANS       -1 0.05 1
+ROTAT       0 10 0
+SCALE       3 .1 .1
+
+// t-rex
+OBJECT 9
+C:\Users\elser\class\gpu\pathTracer\Project3-CUDA-Path-Tracer\scenes\tyraLoPoly.obj
+material 7
+TRANS       0 0 -2
+ROTAT       0 90 0
+SCALE       -2.25 2.25 2.25 
+
+// Sphere
+OBJECT 10
+sphere
+material 4
+TRANS       5 10 -5
+ROTAT       0 0 0
+SCALE       8 8 8
+
 //// bunny
 //OBJECT 6
 //C:\Users\elser\class\gpu\pathTracer\Project3-CUDA-Path-Tracer\scenes\bunnyLoPoly.obj
 //material 8
 //TRANS       1 0 -2
 //ROTAT       0 0 0
 //SCALE       1 1 1 
-
-//// Sphere
-//OBJECT 6
-//sphere
-//material 4
-//TRANS       -3 4 -2
-//ROTAT       0 0 0
-//SCALE       3 3 3
 //
 //// platform
 //OBJECT 7
@@ -195,20 +226,20 @@ SCALE       .01 10 10
 //TRANS       -3 1.25 -1
 //ROTAT       0 0 0
 //SCALE       3 2.5 7
-
-//// teapot
-//OBJECT 6
-//C:\Users\elser\class\gpu\pathTracer\Project3-CUDA-Path-Tracer\scenes\teapotTris.obj
-//material 7
-//TRANS       0 0 0
-//ROTAT       0 0 0
-//SCALE       .5 .5 .5 
-
+//
+////// teapot
+////OBJECT 6
+////C:\Users\elser\class\gpu\pathTracer\Project3-CUDA-Path-Tracer\scenes\teapotTris.obj
+////material 7
+////TRANS       0 0 0
+////ROTAT       0 0 0
+////SCALE       .5 .5 .5 
+//
 //// glass Sphere
 //OBJECT 8
 //sphere
 //material 6
-//TRANS       0 1.5 -2
+//TRANS       0 2 -2
 //ROTAT       0 0 0
 //SCALE       3 3 3
 //
@@ -259,19 +290,3 @@ SCALE       .01 10 10
 //TRANS       0 8 0
 //ROTAT       0 0 45
 //SCALE       3 .1 3
-
-//// Oren-Nayar Sphere
-//OBJECT 9
-//sphere
-//material 6
-//TRANS       3 4 -2
-//ROTAT       0 0 0
-//SCALE       3 3 3
-//
-//// Floor light
-//OBJECT 10
-//cube
-//material 0
-//TRANS       0 0 0
-//ROTAT       0 0 0
-//SCALE       10 1 1