EnumStringValues

Library to allow conversion between an Enum Value and a string, in both directions. Implemented as an Attribute to be applied to Enum fields to define a string, and methods to extract the defined string given the enum or provide the matching given a string. Enum name is registered as a default stringValue everywhere. All operations are cached, to save on reflection overheads. But this can be disabled, with EnumExtensions.Behaviour.UseCaching, if desired.

Breaking Change Log (3.0 -> 4.0)

• .NET 3.5 support is entirely dropped. Please use the last 3.2.* build.
• There are 2 changes which change behaviour of the library, though do not cause compile-time errors. They are:
  • Caching.
    • This is now active by default, which will change the CPU vs RAM profile of EnumStringValues. See docs below for how to disable caching, if desired.
  • Use of Enum Literal Name.
    • The literal name is now always included by default, which might affect behaviour in some edge cases.
    • Again, this behaviour is controllable, see docs below for how to adjust this behaviour, if desired.

Breaking Change Log (2.0 -> 3.0)

The Deprecated ParseStringValueToEnum method has been removed. Please use ParseToEnum instead.

Example Usage

/* Define Mappings. */
public enum exampleEnum
{
  EnumWithoutAnyCustomStringValue,

  [StringValue("AValue")]
  EnumWithAStringValueDefined,

  [StringValue("2", true),
   StringValue("Two")]
  EnumWithMultipleStringValuesDefinedAndOneMarkedAsPreferred
}


/* Map from Enum to string. */
using EnumStringValues.EnumExtensions;

exampleEnum.EnumWithoutAnyCustomStringValue.GetStringValue()
               // returns "EnumWithoutAnyCustomStringValue"

exampleEnum.EnumWithAStringValueDefined.GetStringValue()
               // returns "AValue"

exampleEnum.EnumWithMultipleStringValueDefinedAndOneMarkedAsPreferred.GetStringValue() 
               // returns "2"


/* Map from string to Enum. */
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()
               // returns exampleEnum.EnumWithoutAnyCustomStringValue

("AValue").ParseToEnum<exampleEnum>()
               // returns exampleEnum.EnumWithAStringValueDefined

("2").ParseToEnum<exampleEnum>()
               // returns exampleEnum.EnumWithMultipleStringValuesDefinedAndOneMarkedAsPreferred

("Two").ParseToEnum<exampleEnum>()
               // also returns exampleEnum.EnumWithMultipleStringValuesDefinedAndOneMarkedAsPreferred


/* Enable Caching. */
EnumExtensions.Behaviour.UseCaching = true;
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()
               // Does Work
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()
               // Does not do Work, as result is already cached.
EnumExtensions.Behaviour.UseCaching = false;
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()
               // Returns to doing Work again


/* Modify behavior with regard underlying enum name. */
EnumExtensions.Behaviour.ShouldIncludeUnderlyingName = UnderlyingNameUsed.Never;
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()               // Fails
 exampleEnum.EnumWithoutAnyCustomStringValue.GetStringValue()                // returns null
("EnumWithAStringValueDefined").ParseToEnum<exampleEnum>()                   // Fails
 exampleEnum.EnumWithAStringValueDefined.GetAllStringValues()                // returns only "AValue"

EnumExtensions.Behaviour.ShouldIncludeUnderlyingName = UnderlyingNameUsed.IfNoOverrideGiven;
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()               // Suceeds
 exampleEnum.EnumWithoutAnyCustomStringValue.GetStringValue()                // returns "EnumWithoutAnyCustomStringValue"
("EnumWithAStringValueDefined").ParseToEnum<exampleEnum>()                   // Fails
 exampleEnum.EnumWithAStringValueDefined.GetAllStringValues()                // returns only "AValue"

EnumExtensions.Behaviour.ShouldIncludeUnderlyingName = UnderlyingNameUsed.Always;
("EnumWithoutAnyCustomStringValue").ParseToEnum<exampleEnum>()               // Suceeds
 exampleEnum.EnumWithoutAnyCustomStringValue.GetStringValue()                // returns "EnumWithoutAnyCustomStringValue"
("EnumWithAStringValueDefined").ParseToEnum<exampleEnum>()                   // Suceeds
 exampleEnum.EnumWithAStringValueDefined.GetAllStringValues()                // returns only "AValue" and "EnumWithAStringValueDefined"

Classes, Methods, etc.

Class: StringValueAttribute

An Attribute applicable to Enum fields

Methods:

StringValueAttribute.ctor(string, bool)
        - Defines a string value to associate with an Enum, and indicates whether it
          is preferred. Second parameter may be omitted and defaults to false.

Class: EnumExtensions

A Class defining 2 groups of methods: Extension Methods on System.Enum, and Static helper methods.

Methods
    System.Enum.GetStringValue()
        - Returns the String Value associated with an Enum.
          If more than one value is defined returns the "Preferred" string value.
          If no value is defined, returns the name of the Enum.
    System.Enum.GetAllStringValues()
        - Returns an IEnumerable of all the String Values associated with an
          Enum, irrespective of preference.
    EnumExtensions.ParseToEnum<T>(this string)
        - Takes a string and an EnumType and returns the matching Enum value.
          Throws if no match can be made.
    EnumExtensions.ParseToEnumList<T>(this IEnumerable<string>)
        - Takes a collection of strings and an EnumType and returns the matching Enum values.
          Throws if any of the strings are unmatchable.
    EnumExtensions.TryParseStringValueToEnum<T>(string, out T)
        - Mirrors the int.TryParse() pattern.
          Takes a string and an EnumType and checks for a matching Enum value.
          If one exists, populates the out param and returns true. Otherwise returns false.
    EnumExtensions.EnumerateValues<T>()
        - Helper Method that returns all of the values in an EnumType.

Removed
    EnumExtensions.ParseStringValueToEnum<T>(string)
        - This was identical to ParseToEnum, but not exposed as an extension of string, and differently named.
          If you were using it, please now use ParseToEnum.

Exceptions and Edge Cases

• Calling GetStringValue when no string value is defined
• ...... will return enum Name
• Calling ParseToEnum() when the string is null
• ...... will throw an ArgumentNullException
• Calling ParseToEnum() when the string doesn't match anything
• ...... will throw an UnmatchedStringValueException()
• Calling ParseToEnumList() when any of the strings are null or don't match anything
• ...... will throw an appropriate Exception depending on the first problem hit.
• Calling GetStringValue when multiple values are defined but none are marked as preferred
• ...... may return any of the string values.
• Calling GetStringValue when multiple values are marked as preferred
• ...... may return any of the preferred values.
• Calling ParseToEnum() when the string is defined for multiple Enums
• ...... may return any of the Enums that it matches.

Note that in all of these 'may return any' cases, I suspect that it will always return the top-most value, but that will be dependant on .NET's implementation of various methods and is not in anyway guaranteed by this library! Frankly, any of these would be a mis-use of the library and could arguably throw instead.

If TryParseStringValueToEnum is called and fails, then it will populate the output variable to default(T), likely the first defined value of the Enum.

Rationale behind library

This library was initially constructed to allow an easy way to define the string value associated with each value of an Enumeration. You can convert an Enum value to a string very easily, but only if the string you want is the name of that value - this library allows you to define any string and easily convert from that Enum to that string. The scenario in my case was wanting a piece of text to display to the user that wasn't forced to be CamelCase.

A natural extension of that was then to allow you to convert in the opposite direction - Given a string and an Enum Type return the enum that matches to that string. The scenario here, was reading a datafile into a program, and wanting to have one of the properties as an Enum.

Finally, it then seemed to be useful to allow you to define multiple possible strings that match to the Enum - so that it could handle the possibility that multiple different inputs should actually map to the same Enum. Once you're defining multiple strings for each enum, you then need to know which one to use when converting from enum to string, so add a property to mark one of those String Values as the 'Preferred' string value.

TODOs

Feature Requests

Please email me with any requests that occur to you. I'll attempt to document any feature requests I receive here, along with any design thoughts or comments on whether they'll happen, etc.

• Further automation of nupkg handling ... can we get post-build events to handle archiving previous versions and copying the new version into the nuget folder?
  • It would need to know the package version number, wouldn't it?

Version History

• 4.0.2 - Re-Release without DEBUG enabled (4.0.1 was unintentionally a DEBUG build)

• 4.0.1 - Fix MemoryLeak bug, in a MaliciousUser edge-case.

• 4.0.0 - Change default behaviours. - Caching is enabled by default. - Enum literal name is AlwaysIncluded by default. - See docs and release notes for versions 3.1.0 and 3.2.0, to change these setting. - Add thread-safety. - Caching dictionaries were not thread-safe; now they are. - Drop support for .NET 3.5 - Required, in order to implement thread-safety. - Note that version 3.2.0 does support .NET 3.5 and has all the same functionality available, but without thread-safety and with different default Behaviour.

• 3.2.0 - Add direct control over how the enum's literal name is used. - By default behaviour remains the same - literal name is used if and only if there are no StringValue attributes defined. - Option is added to allow for literal name to always be included (as lowest priority) or never be included. - Control is modified via: EnumExtensions.Behaviour.ShouldIncludeUnderlyingName = UnderlyingNameUsed.Always. - Default will be changed to 'Always' in v4.0

• 3.1.0 - Add option of caching all work done from all end points. - Caching is opt-in; accessed by setting EnumExtensions.Behaviour.UseCaching = true. - Caching is NOT thread-safe (to maintain .NET 3.5 support) - Thread-safety will be added in v4.0

• 3.0.1 - Update codebase to C# 7.3 and thus add System.Enum constraints on all typed methods. - Only impact should be to convert run-time errors into compile-time errors

• 3.0 - Convert the project to .Net Standard 2.0 - Remove the Obsolete ParseStringValueToEnum method.

• 2.0 - Make the library use the existing Enum name as its default string value - Exposed the Parse methods as extensions on String and List<string> - Added a clone of the basic Parse method renamed as ParseToEnum<T> - NOTE: The old parse method (ParseStringValueToEnum) is now deprecated and will be removed in vNext. ParseToEnum is identical and should be used instead.

• 1.0 - Final cosmetic tweaks. (Project is now essentially complete and this is likely the last update in a while)

• 0.11 - Update nuget files on build

• 0.10 - Explicitly support recent major .NET versions.

• 0.9 - Created a nuget package, so committing structure for that.

• 0.8 - Upgrade to .NET 4.5.1

• 0.7 - Make nuget manage the nUnit dependency.

• 0.6 - Fix namespaces which previously related to my personal Utilities project :)

• 0.5 - Rename Parse Methods to reflect the fact that they return Enums, not ints.

• 0.4 - Improve Attribute constructor layout, and adjust access modifiers

• 0.3 - Fix Null string handling.

• 0.2 - Initial Readme.

• 0.1 - Initial Upload.

Dev Guide

This section is just notes for myself - I don't do much remote-based git development from home, nor work much on this or on other nuget packages very often, so I usually forget most of what I've learned about getting the setup to workin-between updates. It may, or may not be valuable to anyone else who wants to contribute, but I'm not maintaining it with that in mind. Definitely feel free to add to this section if you think there are better ways to achieve the goals, but I'll be very picky about anything that removes information, for obvious reasons.

README

The Nuget Documentation is markdown based, so pull through the higlights from this file and a reference to the GitHub page. Currently pulls through Summary, Breaking Changes, Example Usage and Version History.

Git

SSH ought to be being managed by Pageant?

• Start Pageant
• Open Pageant UI and 'Add Key'
• .ssh<github ppk> Doesn't seem to work.
• key is registered with GH, but not getting accepted. $ ssh -vT [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to github.com [192.30.252.131] port 22. debug1: Connection established. debug1: identity file /c/Users/Brondahl/.ssh/identity type -1 debug1: identity file /c/Users/Brondahl/.ssh/id_rsa type -1 debug1: identity file /c/Users/Brondahl/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version libssh-0.6.0 debug1: no match: libssh-0.6.0 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-sha1 none debug1: kex: client->server aes128-cbc hmac-sha1 none debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'github.com' is known and matches the RSA host key. debug1: Found key in /c/Users/Brondahl/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Brondahl/.ssh/identity debug1: Trying private key: /c/Users/Brondahl/.ssh/id_rsa debug1: Trying private key: /c/Users/Brondahl/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey).

doesn't seem to be trying to use github key? Tried restart the bash prompt.

Gave up and copied "id" key from work - works now (despite not registered with Pageant?)

Creating a new Nuget Package

With .Net Standard, you no longer have to use a nuspec file since all the package information is added to the csproj file.

Note: Please make sure you have the latest version of Visual Studio 2017.

• Update the EnumStringValues.csproj with any new information. This can also be done in the package tab of the project properties
  • For example, the new: PackageVersion, PackageReleaseNotes, etc.
  • new semantic version number
  • needs an additional manual update int .csproj file, as the VS UI appears to be buggy
  • release note tag (note no <> in here, use XML-escaped version instead - >)
• Update README.
• Clean and Rebuild the solution, which will automatically package everything up for you.
  • The newly created package will be dropped in the .\EnumStringValues\bin\Release\ directory.
• Open new package with Nuget Package Explorer, explore to dll, open dll with reflector, verify updates have 'taken'.
• Packages should be stored in root\nuget
  • Move old nupkg to OldPackages folder
  • Move (or copy) newly packed package, from the bin\Release folder where it was created, to root\nuget